Rianbow Automatic Water Fountain User Manual

Rianbow Automatic Water Fountain

Product Overview

• 1.5L capacity made of ceramics
• Water Outlet
• Filter Box with Pre-filter Sponge
• Cord Slot for the water pump power cord
• Rainbow Top Cover and Drinking Area
• Water Tank

How to Use

1. 1. Install the pre-filter sponge and the pump:

Step 1: Place the pre-filter sponge in a clean bowl and soak it for 5 minutes.

Step 2: Put the filter in the filter box and close the lid. Insert the pump into the foam filter and set both down into the round inside the bowl. Press down so the suction cups attach. The water pump USB cable goes through the cord slot.

Step 3: Install the filter box.

Notes:

• Fully soak the filter before turning on the appliance; otherwise, water may not flow through the filter smoothly and cause spillage.
• Do not soak the filter in the water tank of the fountain to prevent surface dust from accumulating.
• Install the water tray and rainbow top cover.
• To extend product life, clean the pump every 2 weeks:
  1. Remove the Pump Cover.
  2. Clean the pre-filter grate with soap and warm water.
  3. Remove the Impeller and clean the parts with soap and warm water.
• Put back the water tray and rainbow top cover to form a seal.
• Connect the power adaptor.

Cautions

• Be sure to shut down and disconnect the power supply for safety when the equipment is not in use.
• This product is for indoor use only.
• The power adapter and wire plug must not be flooded during cleaning.
• This product is not allowed to run without water (can be ignored for models with the function of outage automatically without water).
• Please disconnect the power supply before maintaining and cleaning the machine.

Rianbow Automatic Water Fountain -1.5L Ceramics

Product Overview For Model 1

How to Use Foe Model 1

Install the pre-filter spong and the pump

• Insert the pump into the foam filter and set both down into the round inside the bowl. Press down so the suction cups attach.

• The water pump USB cable goes through the cord slot

Install the filter

• Step 1:
  Soak the filter in a clean bowl for 5 minutes.

• Step 2:
  Put the filter in the filter box, and close the lid.

• Step3:
  Insall the filter box.

Notes:

• Fully soak the filter before turning on the appliance; otherwise, water may not flow through the filter smoothly and cause spillage.
• Do not soak the filter in the water tank of the fountain in case of any surface dust.

Install the water tray and rainbow top cover

• Put back the water tray and rainbow top cover to form a seal.

• Connect the power adaptor.

To extend product life, please clean the pump every 2 weeks.

1. Remove the Pump Cover
2. Clean the pre-filter grate with soap and warm water.
3. Remove the Impeller and clean the parts with soap and warm water.

Cautions

1. Be sure to shut down and disconnect the power supply for safety when the equipment is not in use.
2. This product is for indoor use only.
3. The power adapter and wire plug must not be flooded during cleaning.
4. This product is not allowed to run without water (can be ignored for models with the function of outage automatically without water).
5. Please disconnect the power supply before maintaining and cleaning the machine.

Rianbow Automatic Water Fountain -1.5L Ceramics

Product Overview For Model 2

How to Use Foe Model 2

Install the pre-filter spong and the pump

• Insert the pump into the foam filter and set both down into the round inside the bowl. Press down so the suction cups attach.

• The water pump USB cable goes through the cord slot.

Install the filter

• Step1:
  Soak the filter in a clean bowl for 5 minutes.

• Step2:
  Put the filter in the filter box, and close the lid.

• Step3:
  Insall the filter box.

Notes:

• Fully soak the filter before turning on the appliance; otherwise, water may not flow through the filter smoothly and cause spillage.
• Do not soak the filter in the water tank of the fountain in case of any surface dust.

Install the water tray and rainbow top cover

• Put back the water tray and rainbow top cover to form a seal.

• Connect the power adaptor.

To extend product life, please clean the pump every 2 weeks.

1. Remove the Pump Cover
2. Clean the pre-filter grate with soap and warm water.
3. Remove the Impeller and clean the parts with soap and warm water.

Cautions

1. Be sure to shut down and disconnect the power supply for safety when the equipment is not in use.
2. This product is for indoor use only.
3. The power adapter and wire plug must not be flooded during cleaning.
4. This product is not allowed to run without water (can be ignored for models with the function of outage automatically without water).
5. Please disconnect the power supply before maintaining and cleaning the machine.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>