Getic RG-EG310GH-E 10-Port high-Performance PoE Router Instruction Manual
- June 9, 2024
- Getic
Table of Contents
Getic RG-EG310GH-E 10-Port high-Performance PoE Router
Preparing for Installation
Package Contents
| Item | Quantity | Remark |
|---|---|---|
| Router | 1 | |
| Mounting bracket | 2 | |
| Foot pad | 4 | |
| M4 x 8 mm screw | 6 | |
| Power cord | 1 | |
| Power cord retention clip | 1 | |
| User Manual | 1 | |
| Warranty Card | 1 |
Log in to the official website of Ruijie Networks (https://www.ruijienetworks.com) and enter the corresponding product category to find the product and download the related documentation.
Installation
Installation Procedure
The RG-EG31 OGH-E router can be installed in a 19-inch EIA cabinet. The
installation steps are as follows:
- Step 1 Take out the two L-shaped brackets from the packing materials and six M4 x 8 mm screws.
- Step 2 Attach a bracket to each side of the router and secure the brackets with the provided screws.
- Step 3 Plug the power cord into the three-pin power plug.
- Step 4 Connect the device with Ethernet cables properly.
Configure the WAN port to establish an Ethernet connection. Connect the LAN port to the switch, the access point or other network devices with an Ethernet cable.
Network Configuration
Method 1 (Recommended)
Scan the QR code on the device or in the manual to download the Ruijie Cloud
App.
Perform the intelligent networking and complete the network configuration
based on the instructions on the App.
Method 2
Connect the client to any LAN port of the device with a cable and visit
http://192.168.110.1 for network configuration. (Google Chrome browser is
recommended.)
Buttons and Ports
Front Panel
- System Status LED
- Reset Button
- ANWAN Switchable Port
- WAN Port
- LAN Port
- Link/ACT Port LED
Rear Panel
- Grounding Lug
- Three-pin AC Power Plug
- Power Cord Retention Clip Hole
Specifications
| Model | RG-EG31OGH-E |
|---|---|
| Port Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z, IEEE |
802.3af, IEEE 802.3at
Ports
|
Ten 10/100/1000Base-T ports, up to 4 WAN ports. (Default: 1 WAN port, 9 LAN ports.
LAN 6, LAN 7 and LAN 8 can be switched to the WAN port.)
Maximum Power Consumption| < 15W
Power Supply
| AC input:
Rated voltage range: 100 V AC to 240 V AC Maximum voltage range: 90 V AC to 264 V AC Frequency: 50 Hz/60 Hz
Rated current: 0.6 A
Dimensions (W x D x H)
| 440 mm x 201.5 mm x 43.6 mm (17.32 in. x 7.93 in. x
1.72 in., with the panel)
440 mm x 200 mm x 43.6 mm (17.32 in. x 7.87 in. x
1.72 in., without the panel)
Operating Environment
| Operating
Temperature
| 0°c to 40°C (32°F to 104°F)
Operating
Humidity
| 10% to 90% RH (non-condensing)
Storage Environment
| Storage
Temperature
| -40°C to 70°C (-40°F to 158°F)
Storage
Humidity
| 5% to 95% RH (non-condensing)
CE Warning: The device may cause radio interference in the living environment