n-com B601 Bluetooth Communication System Single Pack User Manual
- June 8, 2024
- N-Com
Table of Contents
The B601 system is compatible via Bluetooth with the Garmin Zumo 595. After pairing up and connecting the navigator to the N-Com system, you will be able to hear the signals coming from the Garmin in your helmet.
For best results, it is recommended to download the latest available Firmware version of the satellite navigator and of the N-Com system.
General Information
PAIRING UP
For the pairing up procedure between N-Com and navigator, please refer to the
user manual of the N-Com system, chapter “Managing two mobile phones (or
Bluetooth devices)”.
N.B.: For proper management of the various devices, the navigator must
always be paired up with the N-Com system as a SECONDARY DEVICE (please refer
to the user manual of the N-Com system, chapter “Managing two mobile phones
(or Bluetooth devices”).
The Garmin Zumo 595 features two different pairing up options: Headset (HFP profile) and Audio Supports (A2DP profile).
Headset + Audio Supports: by activating both options, you can receive in your
helmet phone calls, GPS indications, audio tracks coming from different
sources (GPS internal memory, mobile phone, Mp3).
Headset: by activating only the Headset (HFP profile) option, you can receive
in your helmet phone calls and GPS indications. You will NOT be able to listen
to multimedia audio.
Audio Supports: by activating only the Audio supports (A2DP profile) option,
you can receive in your helmet multimedia audio. You will NOT be able to hear
phone calls or GPS.
CONNECTION
Once the GPS has been paired up, connection takes place automatically upon
switching on the B601 system.
N.B.: It is recommended to switch off the AUDIO PUSHBUTTONS on the navigator. With AUDIO PUSHBUTTONS active, with each command given on the Garmin, the navigator sends an acoustic feedback signal to the connected N-Com system, temporarily interrupting the playback of musical tracks and/or intercom communication between the two helmets.
Individual Use
The navigator must be paired up and connected to the rider helmet only, following the instructions provided in the “General” section.
GPS INDICATIONS
After pairing up and connecting the navigator to the N-Com system, you will be able to hear the audio signals coming from the Garmin Zumo in your helmet.
MOBILE PHONE
For proper management of the various devices, the mobile phone must be paired
up to the N-Com system as MAIN DEVICE.
For proper operation of all devices involved, it is recommended to NOT pair up
and connect the mobile phone and navigator one to the other.
Incoming calls temporarily interrupt the connection with the navigator.
MUSIC
FROM THE NAVIGATOR: You will not be able to listen to audio tracks coming from
the navigator.
FROM THE MOBILE PHONE: You will be able to listen to music coming from the
phone. During a GPS indication, the audio track is temporarily paused.
USE IN PAIR
The navigator must be paired up and connected to the rider helmet only, following the instructions provided in the “General” section.
GPS INDICATIONS
The intercom connection is automatically interrupted with each indication coming from the navigator and restored at the end of said indication.
MOBILE PHONE
For proper management of the various devices, the mobile phone must be paired
up to the N-Com system as MAIN DEVICE.
For proper operation of all devices involved, it is recommended to NOT pair up
and connect the mobile phone and navigator one to the other.
Incoming phone calls automatically interrupt the connection with the navigator
and the intercom connection.
MUSIC
FROM THE NAVIGATOR: During intercom connection, you will not be able to listen
to audio tracks coming from the navigator.
FROM THE MOBILE PHONE: During connection to the navigator, you will be able to
listen to music coming from the mobile phone and share it with your passenger
through the “Music Sharing” function (if available). During a GPS indication,
the audio track is temporarily paused, and the intercom connection is
temporarily suspended.
UNIVERSAL INTERCOM
During the UNIVERSAL INTERCOM connection, the B601 system keeps the connection active only to the MAIN DEVICE (and not to the SECONDARY DEVICE). Hence it will not be possible to use the navigator.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>