molex 0436500509 Connector Headers and PCB Receptacles Instruction Manual
- June 4, 2024
- molex
Table of Contents
molex 0436500509 Connector Headers and PCB Receptacles
PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION
Documents
- 3D Model (PDF) Packaging Specification 708730000-PK-000 (PDF)
- Drawing (PDF) Test Summary 430450004-TS-000 (PDF)
- 3D Model Test Summary TS-43045-001-001 (PDF)
- Product Specification 436500001-PS-JA-000 (PDF) Test Summary TS-43045-002-001 (PDF)
- Product Specification 436500001-PS-KO-000 (PDF) Test Summary TS-46235-001-001 (PDF)
- Product Specification 436500001-PS-SP-000 (PDF ) Datasheet (PDF)
- Product Specification PS-43650-001 (PDF) Symbol Footprint Data SYM-43650-0509-001 (PDF)
- Packaging Specification 436500001-PK-000 (PDF) RoHS Certificate of Compliance (PDF)
Agency Certification
- CSA LR19980
- UL E29179
General
- Product Family PCB Headers
- Series 43650
- Application Power, Wire-to-Board
- Comments “””””””High Temperature|Square Pin|Solder Type
This Molex product is manufactured from material that has the following ratings, tested by independent agencies:. a) A Glow Wire Ignition Temperature (GWIT) of at least 775 deg C per IEC 60695-2-13.. b) A Glow Wire Flammability Index (GWFI) above 850 deg C per IEC 60695-2-12.and hence complies with the requirements set out in the International Standard IEC 60335-1 5th edition – household and similar electrical appliances – safety, section 30 Resistance to heat and fire.
The customers using this product must determine its suitability for use in their particular application through testing or other acceptable means as described in end-product glow-wire flammability test standard IEC 60695-2-11 and any applicable product enduse standard(s).
If it is determined during the customer’s evaluation of suitability, that higher performance is required, please contact Molex for possible product options.”
- Overview Micro-Fit Connector System
- Product Name Micro-Fit 3.0
- UPC 800755008418
Physical
- Breakaway No
- Circuits (Loaded) 5
- Circuits (maximum) 5
- Color – Resin Black
- Durability (mating cycles max) 30
- Flammability 94V-0
- Glow-Wire Capable Yes
- Mated Height 6.98mm
- Material – Metal Brass
- Material – Plating Mating Tin
- Material – Plating Termination Tin
- Material – Resin High-Temperature Thermoplastic
- Net Weight 0.949/g
- Number of Rows 1
- Orientation Right Angle
- PCB Locator Yes
- PCB Retention Yes
- PCB Thickness – Recommended 1.60mm
- Packaging Type Embossed Tape on Reel
- Pitch – Mating Interface 3.00mm
- Plating min – Mating 2.540μm
- Plating min – Termination 2.540μm
- Polarized to PCB Yes
- Shrouded Fully
- Stackable No
- Temperature Range – Operating -40° to +105°C
- Termination Interface: Style Surface Mount
Electrical
- Current – Maximum per Contact 8.5A
- Voltage – Maximum 600V
Solder Process Data
- Duration at Max. Process Temperature (seconds) 030
- Lead-free process Capability REFLOW
- Max. Cycles at Max. Process Temperature 003
- Process Temperature max. C 260
Material Info
Reference – Drawing Numbers
- Packaging Specification 436500001-PK-000, 708730000-PK-000
- Product Specification 436500001-PS-JA-000, 436500001-PS-KO-000, 436500001-PS-SP-000, PS-43650-001
- Sales Drawing SD-43650-004-000
- Symbol/Footprint Data SYM-43650-0509-001
- Test Summary 430450004-TS-000, TS-43045-001-001, TS-43045-002-001, TS-46235-001-001
EU ELV
Not Relevant
EU RoHS China RoHS
Compliant
REACH SVHC
- Contained Per – D(2021)4569-DC (8 July 2021)
- Dibutylbis(pentane-2,4- dionato-O,O’)tin
- 2-Ethylhexyl 10- ethyl-4,4-dioctyl-7- oxo-8-oxa-3,
- Phenol, 2-(2Hbenzotriazol- 2-yl)-4,6- bis(1,1-dim
- C.I. Direct Black 38 Dibutyltin-dichloride 1,2-dimethoxyethane 1,2-
- Benzenedicarboxylic acid, bis(3- methylbutyl)
- Disodium 3,3′-[[1,1′- Biphenyl]-4,4′- Diylbis(Azo)
- Octamethylcyclotetrasiloxane
- Decamethylcyclopentasiloxane
- Dodecamethylcyclohexasiloxane Octanoic acid, 2,2,3,3,4,4,5,5,6,6,7,7,8,8,8- pen
- Benzo(ghi)perylene
- Dipentyl phthalate
- 2-(2H-Benzotriazol-2- yl)-4,6-
- ditertpentyl phenol Perfluorohexane-1-
- sulphonic acid and its salts
- Perfluorononan-1- oic acid (2,2,3,3,4,4,5,5,6,6,7
- Dioctyltin dilaurate, stannane, dioctyl-, bis(co Dodecachloropentacyclo[12.2.1.16,9.02,13.05,10]o
- Pyrene
- Fluoranthene
- Perfluorobutane
- sulfonic acid (PFBS) and its sal
- Tris(4-nonyl phenyl, branched and linear)
- phosphine Nonadecafluorodecanoic acid (PFDA) and its sodium
- Zirconia
- Aluminosilicate
- Refractory Ceramic
- Fiber 1,2- Benzenedicarboxylic acid, dipentyl ester, br diisohexyl phthalate 1,2-
- Benzenedicarboxylic acid, hexyl ester, bra
- 2-(2H-Benzotriazol-2- yl)-4-(tert-butyl)-6- (sec-b 2-(2H-Benzotriazol-2- yl)-4,6-
- ditertpentylphenol
- Cadmium
- Lead
- Lead(II,IV)-oxide
- Cadmium-oxide
- Diboron-trioxide
- Decabromodiphenylether 1,2-bis(2- methoxyethoxy)ethane
- 1,2-Dimethoxyethane
- bis(2-methoxyethyl) ether
- Tris(2-chloroethyl)
- phosphate
- Lead chromate
- molybdate sulfate red
- Lead chromate
- Bis(tributyltin) oxide
- Alkanes, C10-13,
- chloro
- Cobalt-dichloride
- Cadmium
- Dipentyl phthalate
- Imidazolidine-2-thione
- Phenanthrene N,N-dimethyl formamide
- 4-aminoazobenzene [Phthalato(2-)]dioxotrilead
- Silicic acid (H2Si2O5),
- barium salt (1:1), lead- Sulfurous Acid, Lead Salt, Dibasic
- Cyanamide, lead(2+) salt (1:1)
- Lead titanium
- zirconium oxide
- Dioxobis(stearato)trilead
- Tetralead-trioxidesulphate
- Pentalead-tetraoxidesulphate
- Lead-titanium-trioxide
- Lead-dinitrate
- Halogen-Free
- Status
- Low-Halogen
For more information, please visit Contact US
- China ROHS
- Green Image
- ELV
- Not Relevant
- RoHS Phthalates
- Not Contained
Search Parts in this Series
43650 Series
Mates With
Micro-Fit 3.0 Receptacle Housing 43645
Micro-Fit 3.0 TPA Receptacle
Housing 171850
Micro-Fit TPA Cable Assembly 145132
Micro-Fit 3.0
Cable Assembly 2147501051 , 2147501052 , 2147501053 , 2147511051 , 2147511052
, 2147511053
This document was generated on 09/02/2021
PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>