Bazz IRREMOTEWFBK Smart Home Wi-Fi Remote Converter Instruction Manual
- June 12, 2024
- BAZZ
Table of Contents
Bazz IRREMOTEWFBK Smart Home Wi-Fi Remote Converter
WARNING
- Please read all information carefully before installation.
- For any questions or troubleshooting please visit: www.bazzsmarthome.com.
- This product is designed for indoor use only.
REQUIREMENTS
- Internet connection with a WIFI network.
- Strong WIFI signal.
- 2.4 GHz wireless frequency.
- Password-protected WIFI network for security reasons (password must contain only letters and numbers and should not be too long).
- Router with sufficient connections.
PRODUCT CONFIGURATION
Front
Back
SPECIFICATIONS
| Color | Black Noir |
|---|---|
| Weight |
205 g
Power|
5V DC 1A (Micro USB)
Infrared Frequency|
38-56K Hz
Infrared Angle|
360º
Infrared Distance|
7m
Wireless Encryption|
WEP / WPA / WPA2 Encryption
Wireless Type|
2.4GHz
Wireless Standard|
IEEE 802.11 b/g/n 2.4G Hz
Wireless Range|
45M
Operating Temperature|
32º to 104ºC
DOWNLOAD FREE APP
- Don’t have the APP? Download the APP.
- Search for “Bazz Smart Home” to download in APP Store or Google Play.
- The free app “Bazz Smart Home” is compatible with mobile devices IOS 8.0 and above and Android 4.0 and above.
REGISTER AND LOGIN
Open “Bazz Smart Home” app, select “Register” to create an account. Select the right country code, enter your email or mobile number and then set password. You can also register through other communication apps which are on the bottom of the page, such as Facebook.
Note:
- If you register by email, you will not receive a verification code. Simply enter your password to log in.
- If you register by phone number, you will receive a verification code before setting password.
- It is recommended to register by email or mobile number if you need to use Amazon Alexa and Google Home for voice control.
QUICKSTAR – PAIRING
Preparation:
- Confirm the device is powered on.
- Confirm the device, smartphone and router are as close to each other as possible.
- Confirm the phone is connected to the WIFI router and to the internet.
Pairing steps:
- Open your app, tap the icon “+” on the top right corner of “Devices” page, select the type of device you want to add.
- Press the reset button for 6 seconds, the LED indicator light will flash rapidly (2 times per second), then tap “Confirm indicator flashes rapidly”.
- Choose the WIFI network and enter the correct password, then tap “Confirm”.
Note:
If you have trouble pairing the device with EZ mode, you can switch to AP mode.
- Press the reset button again for 6 seconds, the LED indicator light will flash slowly. The device is in AP mode.
- Select the AP mode in the application.
PAIR A DEVICE TO CONTROL
- Enter the “Devices” page.
- Complete the configuration.
- Select “Add remote”.
- Select the remote device type. Choose a set you want to control.
- We will use the air conditioner as an example:
- Click “Air Conditioner”.
- Search your brand in the list and select it, then you can see the control page.
- Click “Power Button” and watch if your air conditioner can turn on/off.
- If so, select “Can use it” then you can control your AC with this page.
- If not, click “I can’t use it”, then click “Power Button” and watch if your set can turn on/off again until it is working.
GO INTO SETTINGS FOR MORE OPTIONS
Examples:
- Customize Scenes: scenes setting.
- Share Device: allow others to control the device by sharing device.
- Push notification.
WARRANTY
BAZZ’s warranty applies to manufacturing defects affecting its products which
existed at the time of the purchase of the product, that are non-apparent and
are unknown to the buyer, for a period of 1 year. This warranty applies to the
product only and does not cover the installation of the product. The warranty
does not apply to material, economic, and/or physical damages or losses caused
by the product. This warranty will not apply to any damages and/or losses
caused by an incorrect use, installation or maintenance of the product. The
manufacturer is therefore not liable for damages to the product or material,
economic and/or physical damages or
losses caused by an incorrect use, installation or maintenance of the product.
If the buyer considers that the product is affected by a defect, the buyer
should return the product to the point of purchase or send an email to
service@bazz.ca. Should the buyer decide to send an email
to service@bazz.ca, a description of the alleged problem
should be included in the email and a proof of purchase as well as the picture
clearly illustrating the alleged defect should be attached to the email. The
buyer should also return the product to BAZZ at his/her own expense. After
product inspection, if the warranty applies, BAZZ will repair or replace the
product free of charge.
FCC NOTE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
- The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the user’s authority to operate the equipment.
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
To maintain compliance with FCC’s RF exposure guidelines, this equipment
should be installed and operated with a minimum distance of 20 cm between the
radiator and your body.
ALSO AVAILABLE
For more informations please visit: www.bazzsmarthome.com
FREQUENTLY ASKED QUESTIONS
What is the Bazz IRREMOTEWFBK Smart Home Wi-Fi Remote Converter?
The Bazz IRREMOTEWFBK is a device that allows you to control infrared (IR) remote-controlled devices using your smartphone or a smart home system via Wi- Fi.
How does the IRREMOTEWFBK work?
The IRREMOTEWFBK receives Wi-Fi signals from your smartphone or smart home system and converts them into IR signals, which are then sent to the connected IR devices.
What types of devices can the IRREMOTEWFBK control?
The IRREMOTEWFBK can control a wide range of IR remote-controlled devices, such as TVs, air conditioners, DVD players, and more.
Does the IRREMOTEWFBK require a hub or central controller?
The IRREMOTEWFBK itself acts as a Wi-Fi hub, eliminating the need for an additional hub or central controller.
Can I control the IRREMOTEWFBK using voice commands?
It depends on the integration capabilities of the device. Some versions might be compatible with voice assistants like Amazon Alexa or Google Assistant.
Is the IRREMOTEWFBK compatible with both iOS and Android devices?
Yes, the IRREMOTEWFBK is usually compatible with both iOS and Android smartphones and tablets.
Does the IRREMOTEWFBK support remote access when I'm not at home?
Yes, if the device is connected to the internet, you can usually control your IR devices remotely.
Can I schedule or automate actions with the IRREMOTEWFBK?
Many versions of the IRREMOTEWFBK allow you to set schedules and automate actions for your IR devices.
Is there a dedicated app for controlling the IRREMOTEWFBK?
Yes, the IRREMOTEWFBK usually comes with a dedicated app that you can use to control and configure the device.
How do I set up the IRREMOTEWFBK for my devices?
The setup process typically involves connecting the IRREMOTEWFBK to your Wi-Fi network and then using the app to program the device codes for your IR- controlled devices.
Can I control multiple IR devices with a single IRREMOTEWFBK?
Yes, the IRREMOTEWFBK can usually control multiple IR devices in your home.
Does the IRREMOTEWFBK have a learning function for custom IR codes?
Some versions of the IRREMOTEWFBK might have a learning function that allows you to teach it custom IR codes from your existing remotes.
Does the IRREMOTEWFBK support infrared range extension?
The IRREMOTEWFBK itself doesn't extend IR range, but it can be placed strategically to control devices within its range.
Can I group my IR devices for simultaneous control using the IRREMOTEWFBK?
Yes, many models of the IRREMOTEWFBK offer the ability to create groups for simultaneous control.
What is the typical range of the IRREMOTEWFBK's IR signals?
The range can vary, but it's usually around 20 to 30 feet, depending on obstacles and interference.
DOWNLOAD THE PDF LINK:Bazz IRREMOTEWFBK Smart Home Wi-Fi Remote Converter Instruction Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>