AEG FFB74707PM Dishwasher User Manual

 AEG FFB74707PM Dishwasher

Product Information:

• Product Name: FFB74707PM FFB74707PW
• Dishwasher Manufacturer: AEG
• Website: www.aeg.com
• Model: FFB74707PM FFB74707PW
• User Manual Language: English (EN)

Product Usage Instructions:

Safety Information:

• Before installing and using the appliance carefully read the supplied instructions.
• Only a qualified person should install the dishwasher.

Installation:

Follow the installation instructions provided in the user manual.

Electrical Connection:

Ensure that the electrical connection is done by a qualified person to avoid the risk of fire and electric shock.

Water Connection:

Follow the water connection instructions are provided in the user manual.

Use:

• Familiarize yourself with the control panel and indicators described in the user manual.
• Load the dishwasher with crockery, cutlery, pots, and pans according to the recommended load and soil levels for each program.
• Select the desired program using the program touch button on the control panel.
• Add detergent and rinse aid to their respective dispensers.
• Press the start touch button to begin the selected program.
• Monitor the indicators on the control panel to track the progress of the program.

Service:

• If service or repair is required, contact the authorized service center.
• Provide them with the model, PNC, and serial number of the appliance, which can be found on the rating plate.

Disposal :

When disposing of the dishwasher, follow the disposal instructions provided in the user manual to avoid the risk of injury or suffocation. – Ensure that children and pets are not able to get closed in the appliance. Note: The above usage instructions are a summary. For detailed instructions and additional information, refer to the user manual provided with the dishwasher.

For any further assistance or support, visit the AEG website at www.aeg.com/support.

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

Visit our website to:

• Get usage advice, brochures, trouble shooter, service and repair information: www.aeg.com/support
• Register your product for better service: www.registeraeg.com
• Buy Accessories, Consumables and Original spare parts for your appliance: www.aeg.com/shop

CUSTOMER CARE AND SERVICE

• Always use original spare parts.
• When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number.
• The information can be found on the rating plate.
• Warning / Caution-Safety information General information and tips Environmental information
• Subject to change without notice.

SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

Children and vulnerable people’s safety

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards
• Children between 3 and 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised.
• Children of less than 3 years of age should be kept away from the appliance unless continuously supervised.
• Children should be supervised to ensure that they do not play with the
• Keep detergents away from
• Keep children and pets away from the appliance when the door is
• Children shall not carry out cleaning and user maintenance of the appliance without

General Safety

• This appliance is for cleaning household-type dishes and tableware
• This appliance is designed for single household domestic use in an indoor
• This appliance may be used in, offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage
• Do not change the specification of this appliance
• The operating water pressure (minimum and maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa)
• Follow the maximum number of 14 place
• If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a
• WARNING : Knives and other utensils with sharp points must be loaded in the basket with their points down or placed in a horizontal
• Do not leave the appliance with the open door unattended to avoid stepping accidentally onto
• Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.
• Do not use high pressure water sprays and/or steam to clean the
• If the appliance has ventilation openings in the base, they must not be covered e.g. by a
• The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be

SAFETY INSTRUCTIONS

 Installation

WARNING! Only a qualified person must install this appliance.

• Remove all the packaging.
• Do not install or use a damaged appliance.
• Follow the installation instructions supplied with the
• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed
• Do not install or use the appliance where the temperature is less than 0 °C.
• Install the appliance in a safe and suitable place that meets installation requirements. be replaced, this must be carried out by our Authorised Service Centre.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains
• This appliance is fitted with a 13 A mains plug. If it is necessary to change the mains plug fuse, use only a 13 A ASTA (BS 1362) fuse (UK and Ireland only).

Water connection

• Do not cause damage to the water hoses.
• Before connection to new pipes, pipes not used for a long time, where repair work has been carried out or new devices fitted (water meters, etc.), let the water flow until it is clean and clear.
• Ensure that there are no visible water leaks during and after the first use of the The water inlet hose has a safety valve and a sheath with an inner mains cable

WARNING!

Dangerous voltage

• If the water inlet hose is damaged, immediately close the water tap and disconnect the mains plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet

Use

• Do not put flammable products or items that are wet with flammable products in, near or on the
• Dishwasher detergents are dangerous. Follow the safety instructions on the detergent packaging.
• Do not drink and play with the water in the
• Do not remove the dishes from the appliance until the programme is complete. Some detergent may remain on the
• Do not store items or apply pressure on the open door of the appliance.
• The appliance can release hot steam if you open the door while a programme

Service

• To repair the appliance contact the Authorised Service Centre. Use original spare parts
• Please note that self-repair or non- professional repair can have safety consequences and might void the guarantee.
• The following spare parts will be available for 7 years after the model has been discontinued: motor, circulation and drain pump, heaters and heating elements, including heat pumps, piping and related equipment including hoses, valves, filters and aquastops, structural and interior parts related to door assemblies, printed circuit boards, electronic displays, pressure switches, thermostats and sensors, software and firmware including reset software. Please note that some of these spare parts are only available to professional repairers and that not all spare parts are relevant for all models.
• The following spare parts will be available for 10 years after the model has been discontinued: door hinge and seals, other seals, spray arms, drain filters, interior racks and plastic peripherals such as baskets and
• Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.

Disposal

WARNING! Risk of injury or suffocation.

• Disconnect the appliance from the mains
• Cut off the mains cable and discard
• Remove the door catch to prevent children and pets to get closed in the appliance

PRODUCT DESCRIPTION

1. Worktop
2. Ceiling spray arm
3. Upper spray arm
4. Lower spray arm
5. Filters
6. Rating plate
7. Salt container
8. Air vent
9. Rinse aid dispenser
10. Detergent dispenser
11. Lower basket
12. Upper basket
13. Cutlery drawer

CONTROL PANEL

1. On/off button
2. Program touch button
3. Program indicators
4. Display
5. Delay touch button
6. Option touch button
7. Indicators
8. Start touch button

Indicators PROGRAMES

The order of the programs in the table may not reflect their sequence on the control panel

1. This program offers the most efficient use of water and energy consumption for crockery and cutlery with normal soil. This is the standard program for test institutes. This program is used to as‐ sess compliance with the Ecodesign Commission Regulation (EU) 2019/2022.
2. Automatic door opening during the drying phase. Refer to “Settings”.
3. The appliance senses the degree of soil and the number of items in the baskets. It automatically ad‐ just the temperature and the quantity of water, the energy consumption and the program
4. This programme is designed to clean the inside of the appliance effectively and efficiently. It removes limescale and grease buildup. The program should be run at least once every 2 months with a dealer or a cleaning product designed for dishwashers and without any
5. With this program, you can quickly rinse off food remains from dishes and prevent odours from forming in the appliance. Do not use detergent with this
6. This is the most silent program. The wash pump works at a very low speed to reduce the noise generated by the appliance. Due to the low speed, the program duration is

Consumption values

1. The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the
2. The values for programs other than ECO are indicative

Information for test institutes

To receive the necessary information for conducting performance tests (e.g. according to: EN60436 ), send an email to:   info.test@dishwasher- production.com

In your request, include the product number code (PNC) from the rating plate. For any other questions regarding your dishwasher, refer to the service book provided with your appliance.

OPTIONS

• Desired options must be activated every time before you start a program.
• It is not possible to activate or deactivate options while a program is running.
• The option button toggles between the available options and their possible combinations.
• Not all options are compatible with each other.
• If you select noncompatible options, the appliance automatically deactivates one or more of them. Only the indicators of the still active options are on.
• If an option is not applicable to a program, the related indicator is off or it flashes quickly for a few seconds and then goes out.
• Activating options can affect water and energy consumption as well as the program duration.

GlassCare
This option protects a delicate load, glassware in particular, from damaging. It prevents rapid changes in the dishwashing temperature of the selected programme and reduces it to 45 °C.

How to activate GlassCare
Press Option until the indicator is on. The display shows the updated programme duration.

ExtraPower
This option improves the dishwashing results of the selected programme. It increases the wash temperature and duration.

How to activate ExtraPower
Press Option until the indicator is on. The display shows the updated program duration.

ExtraHygiene
This option provides better cleaning results by keeping the temperature between 65 and 70 °C for at least 10 minutes during the last rinsing phase.

How to activate ExtraHygiene
Press Option until the indicator is on. The display shows the updated program duration. www.aeg.com

SETTINGS

Program selection mode and user mode

When the appliance is in program selection mode it is possible to set a program and to enter user mode.

Settings available in the user mode:

• The level of water softener according to the water
• The level of rinse aid according to the required
• Activation or deactivation of the AirDry.

As the appliance stores the saved settings, there is no need to configure it before every cycle.

How to set the program selection mode

The appliance is in program selection mode when the program indicator is on and the display shows the program duration.  After activation, the appliance is in program selection mode by default. If not, set the program selection mode the following way: Press and hold simultaneously Delay and Option until the appliance is in program selection mode

How to enter user mode

Make sure the appliance is in programme selection mode.

To enter user mode, press and hold simultaneously Delay and Option until the indicators,   and   flash and the display is blank.

The water softener

The water softener removes minerals from the water supply, which would have a negative effect on the washing results and on the appliance.

The higher the content of these minerals, the harder your water is. Water hardness is measured in equivalent scales.

The water softener should be adjusted according to the hardness of the water in your area. Your local water authority can advise you on the hardness of the water in your area. Set the right level of the water softener to assure good washing results.

Water hardness

1. Factory setting.
2. Do not use salt at this

Regardless of the type of detergent used, set the proper water hardness level to keep the salt refill indicator active. Multi-tabs containing salt are not effective enough to soften hard water.

Regeneration process

For the correct water softener operation, the resin of the softener device needs to be regenerated regularly. This process is automatic and is the part of the normal dishwasher operation. When the prescribed quantity of water (see values in the table) has been used since the previous regeneration process, a new regeneration process will be initiated between the final rinse and the programme end.

In the case of the high water softener setting, it may occur also in the middle of the  program, before the rinse (twiceduring a program). Regeneration initiation has no impact on the cycle duration, unless it occurs in the middle of a program or at the end of a program with a short drying phase. In such cases, the regeneration prolongs the total duration of a program by additional 5 minutes. Subsequently, the rinsing of the water a softener that lasts 5 minutes may begin in the same cycle or at the beginning of the next program. This activity increases the total water consumption of a program by additional 4 liters and the total energy consumption of a program by an additional 2 Wh. The rinsing of the softener ends with a complete drain.

Each performed softener rinse (possible more than one in the same cycle) mayprolong the program duration by another 5 minutes when it occurs at any point at the beginning or in the middle of a program.

All the consumption values mentioned in this section are determined in line with the currently applicable standard in laboratory conditions with water hardness 2.5mmol/L (water softener: level 3) according to the regulation: 2019/2022. The pressure and the temperature of the water as well as the variations of the mains supply can change the values.

How to set the water softener level

Make sure the appliance is in user mode.

1. Press Program.
   • The indicator still
   • The remaining indicators are
   • The display shows the current setting: e.g.   __ = level 5.
2. Press Program repeatedly to change the Press the on/off button to confirm the setting.

The rinse aid level

The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase.

You can set the released quantity of rinse aid between level 1 (minimum quantity) and level 6 (maximum quantity). Factory setting: level 4.

When the rinse aid chamber is empty, the rinse aid indicator is on, notifying to refill rinse aid. If the drying results are satisfactory while using multi- tablets only, you can deactivate the dispenser and the indicator. However, for the best drying performance, always use rinse aid and keep the rinse aid indicator active.

To deactivate the rinse aid dispenser and indicator, set the level of rinse aid to 0.

How to set the rinse aid level

Make sure the appliance is in user mode.

1. Press Start.
   • The indicator   still
   • The remaining indicators are
   • The display shows the current setting: e.g. = level 4.
2. Press Start repeatedly to change the setting.
3. press the on/off button to confirm the setting.

AirDry

AirDry improves the drying results with less energy consumption. The appliance door opens automatically during the drying phase and remains ajar.

AirDry is automatically activated with all programs other than    (if applicable). The duration of the drying phase and the door opening time vary depending on the selected programme and options. When AirDry opens the door, the display shows the remaining time of the running program.

CAUTION!

Do not try to close the appliance door within 2 minutes after automatic opening. This can cause damage to the appliance. If, afterwards, the door is closed for at least 3 minutes, the running programme ends.

CAUTION!

If children have access to the appliance, we advise deactivating AirDry. The automatic opening of the door may pose a danger.

How to deactivate AirDry

Make sure the appliance is in user mode.

1. Press Delay.
   • The indicator   still
   • The remaining indicators are
   • The display shows the current setting:
   • AirDry is deactivated
   • AirDry is activated.
2. Press Delay to change the indicators
3. Press the on/off button to confirm the setting.

BEFORE FIRST USE

1. Make sure that the current level of the water softener agrees with the hardness of the water supply. If not, adjust the level of the water softener.
2. Fill the salt
3. Fill the rinse aid
4. Open the water
5. Start a program to remove any processing residuals that can still be inside the appliance. Do not use detergent and do not put dishes in the

After starting the program, the appliance recharges the resin in the water softener for up to 5 minutes. The washing phase starts only after this procedure is complete. The procedure is repeated periodically.

The salt container

CAUTION!

Use rough salt designed for dishwashers only. Fine salt increases the risk of corrosion. The salt is used to recharge the resin in the water softener and to assure good washing results in daily use.

How to fill the salt container

1. Turn the cap of the salt container counterclockwise and remove it.
2. Put 1 liter of water in the salt container (only for the first time).
3. Fill the salt container with dishwasher salt (until it is full).
4. Carefully shake the funnel by its handle to get the last granules
5. Remove the salt around the opening of the salt
6. Turn the cap of the salt container clockwise to close the salt

CAUTION!

Water and salt can come out of the salt container when you fill it. After you fill the salt container, immediately start the shortest programme to prevent corrosion. Do not put dishes in the baskets.

How to fill the rinse aid dispenser

CAUTION!
The compartment (B) is for rinse aid only. Do not fill it with detergent

DAILY USE

1. Open the water tap.
2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode.
   • If the salt indicator is on, fill the salt container.
   • If the rinse aid indicator is on, fill the rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start a program suitable for the type of load and the degree of soil.

CAUTION!

Only use rinse aid designed specifically for dishwashers.

1. Open the lid (C).
2. Fill the dispenser (B) until the rinse aid reaches the marking ”MAX”.
3. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation.
4. Close the lid. Make sure that the lid locks into position. Fill the rinse aid dispenser when the indicator (A) is clear

Using the detergent

CAUTION!

Only use detergent specifically designed for dishwashers.

1. Press the release button (A) to open the lid (C).

2. Put the detergent (gel, powder or tablets) in the compartment (B).

3. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the
   appliance door.

4. Close the lid. Make sure that the lid locks into position.

For information about the detergent dosage, refer to the manufacturer’s instructions on the packaging of the product. Usually, 20 – 25 ml of gel detergent is adequate for washing a load with normal soil.

The upper ends of the two vertical ribs inside the compartment (B) indicate the maximum level for filling the dispenser with gel (max. 30ml).

Setting and starting a program

Starting a program

1. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode and the door is closed.
2. Press Program again and again until the indicator of the desired program is on. The display shows the program duration.
3. Set the applicable options.
4. Press Start to start the program.
   • The indicator of the running phase is on.
   • The program duration starts to decrease with steps of 1 minute.

Starting a program with delay start

1. Set a program.
2. Press Delay repeatedly until the display shows the desired delay time (from 1 to 24 hours).
3. Press Start to begin the countdown.
   • The indicator is on.
   • The remaining time counts down in hours. The final hour is displayed in minutes.
   • When the countdown is completed, the program starts and the indicator of the running phase is on. The indicator is off.

Opening the door while the appliance operates

Opening the door while a programme is running stops the appliance. It may affect energy consumption and the program duration. After closing the door, the appliance continues from the point of interruption.

If the door is opened for more than 30 seconds during the drying phase, the running programme ends. It does not happen if the door is opened by AirDry function.

Do not try to close the appliance door within 2 minutes after AirDry automatically opens it as this may cause damage to the appliance.
If, afterward, the door is closed for at least 3 minutes, the running programme ends.

Canceling the delay start while the countdown operates

When you cancel the delay start you have to set the programme and options again. Press simultaneously Delay and Option until the appliance is in programme selection mode.

Canceling the program

• Press and hold simultaneously Delay and Option until the appliance is in program selection mode.
• Make sure that there is detergent in the detergent dispenser before you start a new program.

End of the program

When the program is complete, The auto Off function switches the appliance off automatically. All buttons are inactive except for the on/off button.

Close the water tap

The Auto Off function This function decreases energy consumption by deactivating

HINTS AND TIPS
General
Follow the hints below to ensure optimal cleaning and drying results in daily use and to protect the environment.

• Washing dishes in the dishwasher as instructed in the user manual usually consumes less water and energy than washing dishes by hand.
• Load the dishwasher to its full capacity to save water and energy. For best cleaning results, arrange items in the baskets as instructed in the user manual and do not overload the baskets.
• Do not pre-rinse dishes by hand. It increases the water and energy consumption. When needed, select a program with a prewash phase.
• Remove larger residues of food from the dishes and empty cups and glasses before putting them inside the appliance.
•  Soak or slightly scour cookware with firmly cooked-on or baked-on food before washing it in the appliance.
• Make sure that items in the baskets do not touch or cover each other. Only then can the water completely reach and wash the dishes.
• You can use dishwasher detergent, rinse aid and salt separately or you can use the multi-tablets (e.g. ”All in 1”). Follow the instructions on the packaging.
• Select a programme according to the type of load and the degree of soil. offers the most efficient use of water and energy consumption detergent based on the water hardness. Refer to the instructions on the detergent packaging.
• Always use the correct quantity of rinse aid. Insufficient dosage of rinse aid decreases the drying results. Using too much rinse aid results in bluish layers on the items.
• Make sure that the water softener level is correct. If the level is too high, the increased quantity of salt in the water might result in rust on cutlery.

What to do if you want to
stop using multi-tablets Before you start to use separately detergent, salt and rinse aid, complete the following steps:

1. Set the highest level of the water softener.
2. Make sure that the salt and rinse aid containers are full.
3. Start the shortest programme with a rinsing phase. Do not add detergent and do put dishes in the baskets.
4. When the programme is complete, adjust the water softener according to the water hardness in your area.
5. Adjust the released quantity of rinse aid.

Loading the baskets

• Always use the whole space of the baskets.
• Use the appliance to wash dishwasher-safe items only.
• Do not wash in the appliance items made of wood, horn, aluminium, pewter and copper as they could crack, warp, get discoloured or pitted.
• Do not wash in the appliance items that can absorb water (sponges, household cloths).
• Put hollow items (cups, glasses and pans) with the opening facing downwards.
• Make sure that glass items do not touch each other.
• Put light items in the upper basket. Make sure that the items do not move freely.
• Put cutlery and small items in the cutlery drawer.
• Move the upper basket upwards to accommodate large items in the lower basket.
• Make sure that the spray arms can move freely before you start a program.

Before starting a program
Before you start the selected programme, make sure that:

• The filters are clean and correctly installed.
• The cap of the salt container is tight.
• The spray arms are not clogged.
• There is enough salt and rinse aid (unless you use multi-tablets).
• The arrangement of the items in the baskets is correct.
• The programme is suitable to the type of load and the degree of soil.
• The correct quantity of detergent is used.

Unloading the baskets

1. Let the tableware cool down before you remove it from the appliance. Hot items can be easily damaged.
2. First, remove items from the lower basket, then from the upper basket. After the program is completed, water can still remain on the inside surfaces of the appliance.

CARE AND CLEANING

WARNING!

Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms negatively affect the washing results. Check these elements regularly and, if necessary, clean them.

Internal cleaning

• Clean the appliance interior with a soft damp
• Do not use abrasive products, abrasive cleaning pads, sharp tools, strong chemicals, scourer or
• Wipe clean the door, including the rubber gasket, once a
• To maintain the performance of your appliance, use a cleaning product designed for dishwashers at least once every two months. Carefully follow the instructions on the packaging of the
• Use the automatic cleaning program for optimal cleaning results.
• Using short-duration programs regularly can cause grease and limescale buildup inside the appliance. Run long-duration programs at least twice a month to prevent the

Removal of foreign objects

Check the filters and the sump after each use of the dishwasher. Foreign objects (e.g. pieces of glass, plastic, bones or toothpicks, etc) decrease the cleaning performance and can cause damage to the drain pump.

CAUTION!

If unable to remove the foreign objects, contact an Authorised Service Centre.

1. Disassemble the filters system as instructed in this
2. Remove any foreign objects manually.
3. Reassemble the filters as instructed in this

External cleaning

• Clean the appliance with a moist soft cloth.
• Only use neutral
• Do not use abrasive products, abrasive cleaning pads or

Cleaning the filters

The filter system is made of 3 parts.

1. Turn the filter (B) counterclockwise and remove it.
2. Remove filter (C) from the filter (B).
3. Remove the flat filter (A).
4. Wash the filters.
5. Make sure that there are no residues of food or soil in or around the edge of the sump.
6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides
7. Reassemble the filters (B) and (C).
8. Put back the filter (B) in the flat filter
   • Turn it clockwise until it locks

CAUTION!

An incorrect position of the filters can cause bad washing results and damage to the appliance.

Cleaning the lower spray arm

We recommend cleaning the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results.

1. To remove the lower spray arm, pull it upwards.
2. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes.
3. To install the spray arm back, press it downwards. toothpick, to remove particles of soil from the holes.
4. To install the spray arm back, press the spray arm upwards and simultaneously turn it counterclockwise until it locks into place.

Cleaning the ceiling spray arm

We recommend to clean the ceiling spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. The ceiling spray arm is placed on the ceiling of the appliance. The spray arm (C) is installed in the delivery tube (A) with the mounting element (B).

1. Release the stoppers on the sides of the sliding rails of the cutlery drawer and pull the drawer out.
2. Move the upper basket to the lowest level to reach the spray arm more easily.
3. To detach the spray arm (C) from the delivery tube (A), turn the mounting element (B) counterclockwise and pull the spray arm downwards.
4. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. Run the water through the holes to wash soil particles away from the inside
5. To install the spray arm (C) back, insert the mounting element (B) in the spray arm and fix it in the delivery tube (A) by turning it clockwise. Make sure that the mounting element locks into place.
6. Install the cutlery drawer on the sliding rails and block the stoppers.

TROUBLESHOOTING

WARNING!

Improper repair of the appliance may pose a danger to the safety of the user. Any repairs must be performed by qualified personnel.

The majority of problems that may occur can be solved without the need to contact an Authorised Service Centre. Refer to the below table for information on possible problems. With some problems, the display shows an alarm code.

Refer to “Before first use”, “Daily use”, or “Hints and tips” for other possible causes.

Once you have checked the appliance, deactivate and activate the appliance. If the problem occurs again, contact an Authorized Service Centre. For alarm codes not described in the table, contact an Authorised Service Centre.

WARNING!

We do not recommend using the appliance until the problem has been completely fixed. Unplug the appliance and do not plug it in again until you are certain that it operates correctly.

The dishwashing and drying results are not satisfactory

Refer to “Before first use”, “Daily use”, or “Hints and tips” for other possible causes.

TECHNICAL INFORMATION

1. Refer to the rating plate for other values.
2. If the hot water comes from an alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption.

Link to the EU EPREL database

The QR code on the energy label supplied with the appliance provides a weblink to the registration of this appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance.

It is possible to find information related to the performance of the product in the EU

EPREL database using the link https://eprel.ec.europa.eu and the model name and product number that you can find on the rating plate of the appliance. Refer to the chapter “Product Description”.

For more detailed information about the energy label, visit www.theenergylabel.eu.

ENVIRONMENTAL CONCERNS
Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol with household waste. Return the product to your local recycling facility or contact your municipal office.

www.aeg.com/shop

117841870-A-162022

References

• Check out our sponsor - Spency.tv
• Il motore di ricerca per risparmiare sui tuoi acquisti | Trovaprezzi.it
• Welcome to AEG
• AEG - aeg.com
• Product Support | AEG
• AEG FFB74707PM | Confronta prezzi | Trovaprezzi.it
• Lavastoviglie al miglior prezzo | Trovaprezzi.it

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>