fillauer 700 100 146 Dynamic Walk Custom Made Adult and Pediatric Instructions

June 13, 2024
fillauer

fillauer 700 100 146 Dynamic Walk Custom Made Adult and Pediatric
fillauer 700 100 146 Dynamic Walk Custom Made Adult and
Pediatric

Casting/Mold Instructions

Dynamic walk is not a corrective orthosis. The cast/mold should be possible to align with 90° in the ankle and close to neutral in the frontal and transverse plane, to achieve good function. If this is not achievable you need to contact Fillauer prior to order: [email protected]

  • If the patient uses a foot orthotic, cast/mold with the foot orthotic on.
  • Send a negative/positive plaster cast or a positive foam model
  • Mark pressure points and sensitive areas and if trimlines should be different from standard
  • Please make a smooth cast with 4 layers of plaster, the cast/mold must be 5 cm longer than the desired height of the finished orthosis
  • Reinforce cast if necessary
  • If you send a positive cast be sure that the rebar reaches the forefoot and is sticking out >10 cm from the proximal end
  • If possible, attach a trace of the shoe insert, the brace is going into
  • Fill in the whole measurement form and send it together with the cast/mold
  • The cast will be discarded 6 months after delivery

Patient information:

Age: Weight (kg):
Activity level:
Low Medium High
Side:
Left Right
Base of Production:

Negative plaster cast Postive plaster cast Positive Foam Model
700 100 146 700 100 145 700 100 147

Type (choose one): 700 100 100

Standard
Single Side Lateral
Single Side Medial
Double Double
Shoe Mount

Measurements (mm):

A ____ B ____ C ____
D ____ E __

Explanation:
A – Height of orthosis
B – Foot length
C – Heel height
D – Calf circumference (at the most prominent part of the calf muscle belly)
E – MTP (measure width of foot at the joint behind the toes where the foot bends)

Material Options:

Standard
Rigid foot plate: 700 100 141 (Is suitable for diabetics)
Rigid calf band: 700 100 142 (Is suitable for more stability)
Flexible foot plate: 700 100 143 (Is suitable for high activity users)

Peek thickness:
6 mm (Standard)
5 mm (less assist)
4 mm (only Pediatric)

Individual padding is not available for custom orthotics, but material can be ordered with the orthotic to be adjusted by the clinician.

Sheet of padding: 700100149

Additional information:

fillauer Logo

Documents / Resources

| fillauer 700 100 146 Dynamic Walk Custom Made Adult and Pediatric [pdf] Instructions
700 100 146 Dynamic Walk Custom Made Adult and Pediatric, 700 100 146, Dynamic Walk Custom Made Adult and Pediatric, Made Adult and Pediatric, Adult and Pediatric
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

fillauer User Manuals

Related Manuals