PHILIPS E27 HPL 18W TrueForce Core LED Lamp Installation Guide

PHILIPS E27 HPL 18W TrueForce Core LED Lamp

Philips TrueForce Core LED lamp

Please take the time to read this installation guide. The guide contains important information and notes regarding the installation and operation.

IMPORTANT!

• Always switch off the power supply before commencing work!
  Please read the installation instructions carefully and follow the wiring instructions to ensure safety.

• The product is NOT dimmable.

• The product can be operated on Direct Mains Only.

• The product is not compatible with electronic gear or ElectroMagnetic (EM) gear.

• Please remove all igniter and capacitor installed.

• Suitable for use in the operating temperature range between -20°C to +45°C.

• Do not change the structure or any components of the product to ensure safety.

• The product is designed to fit in standard IC-compliant E27/E40 lamp holders.

• The product should be installed by a qualified professional.

• Perform inspection before installation to ensure the luminaire and lamp holder are in good condition to carry the weight and performance of the product.

• Recommended not to use in the open luminaire.

• Please do not apply the product in applications that contain emergency or/and explosive-proof luminaires.

• The total system performance may vary depending on the lighting/luminaire system.

• For the latest information, please refer to www.philips.com/lighting.

• In case of doubt, please consult a Philips representative.

• outdoor applications require the lamp cap to be protected with a suitable lamp socket.

• The product fulfills IP65 requirements except for lamp caps, outdoor applications require the lamp to be used in luminaires with a suitable IP rating.

• The lamp cap needs to be installed in the correct IP-rated socket.

DISCLAIMER:
Signify disclaims liability for any direct, indirect, or incidental damages in case of installation performed either not according to this guide or not performed by a professional electrician.

INSTALLATION INSTRUCTION

All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license 09/2022 www.philips.com/lighting 3241 659 94072

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>