ACEFAST E8 Wireless Charger Desktop Holder User Guide

ACEFAST E8 Wireless Charger Desktop Holder

Product Information

The E8 is a desktop 2-in-1 wireless charging holder. It features a magnetic wireless charging area and a lower wireless charging area for convenient charging of compatible devices. The charger has a USB-C input and an LED indicator for easy monitoring of the charging status. With a total output of 30W, it supports various charging modes for mobile phones and headsets.

Specifications:

• Model: E8
• Input: Magnetic wireless charging area, Bottom wireless charging area
• 18W 5W/7.5W/10W/15W (Max) Compatible for iP12 series mobile phones and above
• Mobile phone: 5W/7.5W/10W/15W (Max)
• Headset: 3W (Max)
• Total output: 30W (Max)
• Lighting Mode: Power on – Blue light is always on, Charging – Steady green light, Foreign object detection – Red light is always on

Notice:

Please check whether your mobile phone supports magnetic wireless charging before using the magnetic charging area to avoid slipping and charging issues. Similarly, ensure that your headset supports wireless charging before using the lower area to charge. Use a 5V/2A output adapter for a 5W load, but for optimal performance, it is recommended to use an adapter that supports fast charging over 36W. Avoid placing metal objects or magnetic cards inthe charging area to prevent overheating of the charger. It is normal for the charger to heat up slightly during foreign object detection. Additionally, keep the charger away from fire sources or corrosive environments. The battery of your mobile phone may heat up during the charging process.

Product Usage Instructions

1. Ensure that your mobile phone supports magnetic wireless charging and your headset supports wireless charging.
2. Connect the USB-C input of the charging holder to a power source using an appropriate USB-C cable.
3. Place your mobile phone on the magnetic wireless charging area or the bottom wireless charging area, depending on compatibility and preference.
4. Observe the LED indicator to monitor the charging status. The blue light indicates that the charger is powered on. The steady green light signifies that the device is being charged. The red light indicates foreign object detection.
5. Avoid placing metal objects or magnetic cards in the charging area to prevent overheating.
6. Keep the charger away from liquids, extreme heat, fire sources, and corrosive environments.

If you encounter any issues or require further assistance, please contact our support team with your product model number and Amazon order number.

Product Diagram

Package Contents

• Wireless Charger × 1
• USB-C Cable × 1
• Quick Start Guide × 1

Thank you for purchasing the desktop 2-in-1 wireless charging holder. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.

Specifications

series mobile phones and above

Bottom wireless charging area

| Mobile phone: 5W/7.5W/10W/15W (Max)
Headset: 3W (Max)
Total output| 30W (Max)

Lighting Mode

Notice

Applicable equipment

1. Please check whether the mobile phone supports magnetic wireless charging, otherwise, the mobile phone may slip and cannot be charged when using the magnetic charging area.
2. Please check whether the headset supports wireless charging, otherwise it cannot be charged when using the lower area to charge

Adapter selection

When using a 5V/2A output adapter, the wireless charger supports a 5W load. In order to ensure the normal use of the charger, it is recommended to use an adapter that supports fast charging over 36W.

Other information

Please do not place metal objects or magnetic cards in the charging area, which may cause the charger to heat up. It is normal to be slightly heated when the foreign body alarms. The battery of the mobile phone will heat up during the charging process. Do not place the charger near a fire source or corrosive environment.

FCC

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Warning Statements:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance 20cm between the radiator & body.

Product Care

Keep away from liquids and extreme heat

Warranty & Customer Support

For questions, support, or warranty claims, contact us at the mail below that corresponds with your region. Please include your Amazon order number and product mode number.

• Amazon US orders: support1@acefast.com
• Amazon EU orders: support2@acefast.com
• Amazon UK orders: support3@acefast.com
• Amazon CA orders: support4@acefast.com
• Amazon JP orders: support5@acefast.com
• Other region orders: support6@acefast.com

*Please note, ACEFAST can provide after-sales service for products purchased from any official ACEFAST store. If you have purchased from local seller, you can also contact them directly for service or warranty issues.

Shenzhen Houshuxia Technology Co., LTD www.acefast.com | support@acefast.com Rm203, 2nd Floor, Building C, Youth Pioneer Park, Jianshe East Road, Tsinghua Community, Longhua Street, Longhua District, Shenzhen, P. R. China Shenzhen, 518000, China

References

• The domain name normal.la is for sale
• ACEFAST - High End Accessories

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>