ENDORFY EY7A004 Vero L5 Bronze 500W Power Supply Instruction Manual
- June 12, 2024
- ENDORFY
Table of Contents
Vero L5 Bronze 500 W
POWERSUPPLY
EY7A004
Designed by ENDORFY
COOLING SP.Z 0.0.
UL. SOKOLOWSKA 24
05-806 SOKOLOW, POLSKA
TEL. +48222920130
EY7A004 Vero L5 Bronze 500W Power Supply
| 
---|---
CONNECTING THE PSU
POWER OUTPUT
| AC input | 200-240 VAC, 4 A, 50 Hz |
|---|---|
| DC output | +12 V |
| Max current | 41A |
| Max combined power | 492 W |
500 W
ErP Lot 6 Ready. Low power C6/C7 sleep state compatible. Active PFC.
INCLUDED CABLING
CUSTOMER SERVICE
ENDORFY.COM/CONTACT
DETAILED INFO
ENDORFY.COM/EY7A004
Safety instruction
- The product should be used as intended. Incorrect use may damage the product and be dangerous to your health.
- Make sure that the product is in good working order before using it.
- The warranty does not cover mechanical damage to the product.
- This device is intended for indoor use, under normal humidity conditions. Do not use it outdoors.
- Do not install and use the device within reach of children.
- To prevent damage from condensation, allow the device to warm up to ambient temperature before use.
- Clean only with a dry, clean cloth. Do not handle with wet hands.
- No user-serviceable components inside. Return to authorized service center for repairs.
- Opening the device or modifying it will void the warranty.
- Do not use the product near liquids or in places where it may be directly exposed to liquids. If the device comes into contact with any liquids, disconnect it fram the power source.
- In the event of a malfunction, disconnect it from the power source immediately and contact Enderby Technical Support.
- Do not discard electrical and electronic equipment together with other household waste.
- The end user is responsible for correct disposal of unnecessary or faulty electrical equipment by returning it to the collection point or to the seller. you purchased the product for additional information.
- CAUTION! Use only manufacturer supplied cables to connect your PSU. Cables not included with this power supply may not be compatible. Using them may cause serious damage to the power supply and connected system.
- Do not open the power supply case. Hazardous voltage levels inside may be present even after disconnecting the power supply from its power
- Do not modify the cables, connectors or chassis of this device.
- This device requires adequate ventilation. Do not cover ventilation openings. Do not insert objects into openings.
- Do not install this device near heating devices.
- Do not install or remove the power supply unit while it is connected to the mains.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>