LUMME LU-FN103 Floor Fan Instruction Manual
- June 12, 2024
- LUMME
Table of Contents
LUMME LU-FN103 Floor Fan
Product Information
| Part Number | LU-FN103 |
|---|---|
| Producer | Cosmos Far View International Limited |
| Power Supply | 230 V ~ 50 Hz |
| Power Consumption | 50 W |
| Net Weight | 2.3 kg |
| Gross Weight | 2.8 kg |
| Package Size (L x W x H) | 450 mm x 180 mm x 450 mm |
| Country of Manufacture | China |
Product Usage Instructions
- Assemble the fan according to the instructions provided.
- Connect the device to a power supply of 230 V ~ 50 Hz.
- Turn on the fan using the control panel or the remote control.
- Adjust the vertical position of the fan using the vertical adjustment screw.
- Control the oscillation of the fan using the oscillating knob.
- Clean and maintain the fan regularly as per the cleaning and maintenance instructions provided.
Parts list
- Front protective grille
- Fixing nut of fan blades
- Fan blades
- Fixing nut rear grille
- Rear protective grille
- Shaft
- Oscillating knob
- Motor
- Vertical adjustment screw
- Control Panel
- Screw
- Internal telescopic tube
- Inner tube retainer
- Rack
- Decorative cup rack
- Base
- Remote control
- Fixation hoop
CAUTION
Read this manual carefully before using the appliance and save it for future reference.
- Before the first use, check the device specifications and the power supply in your
- It is not intended for industrial use
- For indoor use Use only for domestic purposes according to the instruction manual.
- Do not use with a damaged cord, plug, or other
- Keep the power cord away from sharp edges and hot
- Do not pull the Always take the socket. Do not reel the cord around the device housing.
- Never attempt to frame and repair the appliance by If you meet problems, please contact the nearest customer service center.
- Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the
- Always unplug the appliance and let it cool down before cleaning and removing Keep unplugged when not in use.
- To avoid electric shock and fire, do not immerse in water or other If this occurs, immediately unplug it and contact service center for inspection.
- Do not use the fan under high humidity conditions (e.g. in the rain) to avoid electric shock and
- Always place the device on a flat stable
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Do not touch running parts of the
- Keep foreign objects away from running parts and grille
- Do not block air inlets on the motor
- Do not use the fan without protective
ASSEMBLING THE FAN
- The device is supplied Before assembling make sure that the part list is complete and that the device has not been damaged during transportation.
- Do not connect the dismantled unit to power To assemble the unit you have to do the following:
- Unscrew four screws from the base (16)
- Place the stand (14) on the base and secure it with four
- Lower the decorative stand cup (15) on the stand from top to
- Secure the telescopic tube (12) with the stand (16) with a screw to fix the inner tube (13).
- The retainer of the inner tube (13) must be screwed in before installing the motor
- Secure the motor (8) securely to the end of the inner tube (12) with a
- Install the rear protective grille (5) on the motor shaft (6) (8) and secure with the rear grill nut (4).
- Install the fan blades (3) on the motor shaft (6) and secure with the retainer (2).
- Attach the front grille (1) to the rear (5) and secure with the rear grille fixing
- In order to change the height of the fan, loosen the screw to secure the inner tube (13), adjust the desired height and tighten the
USING THE DEVICE
- The key for oscillation turning on/off is located on the motor Press the button to turn on oscillation, the fan will start rotating. To stop oscillation pull out the button.
BUTTONS
- On/Speed: Switching on the fan / changing rotation speed;
- Time: Setting timer for switching off the fan;
- Off: Switching off the
- Mode: selecting rotation mode;
LIGHT INDICATORS
- H: maximum rotation speed;
- M: medium rotation speed;
- L: minimum rotation speed;
- 4 H, 2 H, 1 H, 0.5 H: programming switching off timer
- Nor: normal fixed rotation mode;
REMOTE CONTROL
- Control and selection of working modes can be done by control panel as well as remote control:
- Mode: selecting rotation mode;
- On/Speed: Switching on the fan / changing rotation speed;
- Timer: Setting timer for switching off the fan;
- Off: Switching off the
CLEANING AND MAINTENANCE
- Before cleaning, always unplug the
- Do not use chemical and abrasive cleaners for
- For seasonal storage use a carton to cover the
- Loosen fittings and remove the front
- Use a cloth soaked in soapy water to the fan
- Do not immerse the appliance in water
SPECIFICATION
| Power supply| Power| Net weight / Gross weight| Package size (L х W х H)| Producer:
Cosmos Far View International Limited
Room 701, 16 apt, Lane 165, Rainbow North Street , Ningbo, China
Made in China
|
230 V ~ 50 Hz| 50 W| 2,3 kg / 2,8 kg| 450 х 180 х 450 mm
WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)
The production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters indicate the month, the 6th and 7th indicate the year of device production.
The producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>