LUMME LU-162 Cordless Jug Kettle User Manual
- June 9, 2024
- LUMME
Table of Contents
DESCRIPTION
CORDLESS JUG KETTLE
LU-162
USER MANUAL
LU-162 Cordless Jug Kettle
- Base
- Housing
- Spout
- Lid
- Handle
- On-Off switch
- Operation light indication
- Real set of the appliance could be different from listed in the User manual. Check once buy.
When using electrical appliances, basic precautions should always be followed,
including the following:
Read all instructions thoroughly before using the appliance. Do not use or
store the unit in damp and moist areas where it may come in contact with
water. Keep out of the reach of children. Do not immerse the unit, cord, plug
or power base in water or other liquid. Use the handle to carry or move the
unit, as the surface may be hot after use and to avoid scalding from hot
liquid. Use caution to not touch the power base or bottom of the kettle after
use to avoid scalding or burns.
Close supervision is necessary when this appliance is to be used by or near
children. Unit must be operated on a flat surface away from the edge of
counter to prevent accidental tipping. Use the appliance only on the voltage
specified on the identification plate. Do not use the kettle if it has been
damaged or modified or appears to have malfunctioned in any way. Do not
operate the kettle with a damaged or incorrect cord or plug. This kettle is
intended for heating water only. Use of any other liquids or food may damage
the interior and void warranty. Do not allow the cord to hang over the edge of
the table or counter, or contact any hot surfaces. This kettle is designed for
Household use only! Do not use outdoors. When not in use and before cleaning,
disconnect the kettle from the outlet. Allow the kettle to cool completely
before attempting to clean.
Do not remove the lid during the heating cycle. Scalding may occur. Do not
operate the kettle without water.
If the unit overheats, please allow the unit to cool for at least 15 minutes.
Do not fill above the MAX line; this may cause water to overflow, which may
cause scalding. Steam may damage walls or cabinets, during use turn the spout
away from walls toward an open space; use heat resistive pads under the kettle
to prevent damage to wood finishes. Do not place or use the unit on or near a
hot gas or electric burner or in a heated oven. Never operate the appliance
when the lid is open or removed.
To remove from the power source, turn the unit OFF and pull the plug from
outlet. Never pull by the cord. To reduce the risk of fire or electrical
shock, do not remove the bottom cover. Do not use for kettle for other than
intended use.
To prevent discoloration, do not place tea bags, coffee, instant noodle, or
any other liquids or items inside the kettle.
Do not wash under direct running water as this will damage the control panel.
Clean with a soft moist cloth.
Do no use or store the unit in direct sunlight or near other heat sources
(oven, stove, etc.).
The kettle may have difficulty bringing water to boil when used in high
altitudes or extreme cold conditions.
Do not disassemble or attempt to repair on your own.
BEFORE INITIAL USE
Remove all packaging materials. Fill kettle to the MAX line and bring to a
boil. When the unit completes the boiling cycle, discard the water – repeat
the process 2 to 3 times. This will remove any dust or residue remaining from
the manufacturing process.
BOILING WATER
Remove the unit from base. Open the cover by depressing the button near the
handle. Fill the kettle with your desired amount of water. Do not fill above
the MAX line.
Close the lid by pressing down gently until it locks (clicks) into place.
Place the kettle on base, ensuring that it is correctly engaged.
Connect cord to power outlet and switch unit ON; the power indicator lights
up.
The kettle will switch off automatically when water has come to a boil.
After use, unplug and empty unused water. Ensure kettle is switched off before
removing from base.
Heating can be stopped at any time by the operating the switch.
As a safety feature, the unit may not start immediately after shutting off.
Please allow 15 to 20 seconds for kettle to cool down before switching on
again.
If kettle ever boils dry, please wait 15 minutes for unit to cool before
refilling with cold water.
The safety cut-off will automatically reset during this time.
Do not open lid when in operation. Steam escaping from the spout is hot. This
appliance is only suitable for heating water; do not use any other liquids.
A minimum of 0.75L of water must be used to prevent overheating.
Model | Power supply | Power |
---|---|---|
LU-162 | 230 V ~ 50 Hz | 1800 W |
WARRANTY DOES NOT APPLY TO CONSUMABLES (FILTERS, CERAMIC AND NON-STICK
COATING, RUBBER SEALS, ETC.)
Production date is availab le in the serial number located on the
identification sticker on the gift box and/or on sticker on the device. The
serial number consists of 13 characters, the 4th and 5th characters indicate
the month, the 6th and 7th indicate the year of device production. Producer
may change the complete set, appearance, country of manufacture, warranty and
technical characteristics of the model without notice. Please check when
purchasing device.
Production branch:
COSMOS FAR VIEW INTERNATIONAL LIMITED
ROOM 701, 16 APT, LANE 165, RAINBOW NORTH STREET, NINGBO, CHINA
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>