KRK SYSTEMS B2500 Scott Storch Classic 8ss Studio Monitor User Guide
- June 12, 2024
- KRK SYSTEMS
Table of Contents
KRK SYSTEMS B2500 Scott Storch Classic 8ss Studio Monitor
Product Information
The Scott Storch Classic 8ss Studio Monitor is a high-quality audio monitoring device designed for professional studio use. It features a sleek and durable design, with advanced audio technologies to deliver accurate and detailed sound reproduction. The monitor is equipped with various control options, ensuring optimal sound customization and compatibility with different audio equipment.
Important Safety Information
Before using the studio monitor, please read and understand the following safety instructions:
- The lightning flash with arrowhead symbol indicates the presence of dangerous voltage inside the product. Avoid opening the enclosure to prevent the risk of electric shock.
- The exclamation point symbol indicates important operating and maintenance instructions. Refer to the accompanying literature for detailed instructions.
- The studio monitor must be connected to an earthed mains socket-outlet for safe operation.
- The device complies with Part 15 of the FCC Rules, ensuring it does not cause harmful interference and accepts any interference received.
- Make sure to match the AC power outlet voltage (100V~, 110-120V~, or 220-240V~) with the studio monitor to avoid damage.
Quick Setup
- Set the POWER switch to ‘OFF’ and connect the provided AC power cord to the AC inlet socket on the studio monitor and a compatible power outlet. Ensure the voltage matches.
- Set the volume on your input device (mixer, audio interface, or computer) to the minimum level.
- Set the POWER switch to ‘ON’ position. Play an audio track and gradually increase the volume on your input device to achieve a comfortable listening level.
System Controls
- VOLUME: The volume knob adjusts the input system gain. Set it to the middle position and adjust the input level from your audio source. Use this knob to balance the volume between the left and right studio monitors.
- HF ADJUSTMENT: The High Frequency adjustment knob allows you to tailor the high-frequency response according to your listening preference. The factory setting is flat.
- BALANCED INPUT: The XLR & TRS input jack is used to connect your audio equipment outputs, such as a mixing console or audio interface. Only connect one input source at a time.
- UNBALANCED INPUT: The RCA input jack is used to connect your audio equipment outputs, such as an audio interface, computer, DJ gear, or mobile device. Only connect one input source at a time.
- AC INPUT INLET SOCKET & FUSE HOLDER: The standard IEC-type AC Inlet Socket provides power to the studio monitor. Below the socket is a fuse holder containing two fuses (one spare).
Thank you for purchasing your new KRK Scott Storch Classic 8ss professional studio monitors. Countless pro engineers, producers, artists, and mixers from all genres—from all over the world, have used these KRK legacy-inspired Classic monitors to deliver award-winning productions globally. This monitor was engineered with over 30-years of innovation and experience in our state- of-the-art facility in California, where we create products that deliver a natural and balanced frequency response with low distortion and superior imaging.
IMPORTANT SAFETY INFORMATION
SAFETY INSTRUCTIONS
-
Read instructions – All the safety and operating instructions should be read before the product is operated.
-
Retain instructions – The safety and operating instructions should be retained for future reference.
-
Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.
-
Follow Instructions – All operating and use instructions should be followed.
-
Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
-
Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards.
-
Water and Moisture – Do not use this product near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
-
Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer.
-
Cart – A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to
overturn. -
Ventilation – Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should
not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided, or the manufacturer’s instructions have been adhered to. -
Power Sources – This product should be operated only from the type of power source indicated on the marking label and connected to a MAINS socket outlet with a protective earthing connection. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
-
Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
-
Mains Plug – Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
-
Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
-
Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
-
Flame Sources – No naked flame sources, such as lighted candles, should be placed on the product.
-
Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
-
Loudspeakers – Excessive sound pressure from loudspeakers can cause hearing loss.
-
Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
- a. When the power-supply cord or plug is damaged.
- b. If liquid has been spilled, or objects have fallen into the product.
- c. If the product has been exposed to rain or water.
- d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
- e. If the product has been dropped or damaged in any way.
- f. When the product exhibits a distinct change in performance-this indicates a need for service.
-
Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
-
Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
WARNING
- The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons
- The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
THE EQUIPMENT MUST BE CONNECTED TO AN EARTHED MAINS SOCKET-OUTLET.
CAUTION REGARDING PLACEMENT
- To maintain proper ventilation, be sure to leave a space around the unit (from the largest outer dimensions including projections) than is equal to, or greater than shown below.
- Top, Bottom, Front, Rear, Left, Right Sides: 10 cm
CAUTION
Changes or modifications to this equipment not expressly approved by KRK
SYSTEMS for compliance could void the user’s authority to operate this
equipment.
CAUTION
To prevent electric shock, match wide blade of plug to wide slot, fully
insert.
CAUTION
Marking and rating plate can be found at the rear panel of the apparatus.
WARNING
- To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.
- Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
- Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
CAUTION
- An appliance with a protective earth terminal should be connected to a mains outlet with a protective earth connection.
- IF IN DOUBT CONSULT A COMPETENT ELECTRICIAN.
- NOTES ON ENVIRONMENTAL PROTECTION
- At the end of its useful life, this product must not be disposed of with regular household waste but must be returned to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s manual, and packaging point this out.
- The materials can be reused in accordance with their markings. Through re-use, recycling of raw materials, or other forms of recycling of old products, you are making an important contribution to the protection of our environment.
- Your local administrative office can advise you of the responsible waste disposal point.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
QUICK SETUP
Auto-Standby activates after 30 minutes of no activity. The Classic Series monitors will deactivate standby when it detects an input signal having an amplitude of -50dBu or greater. In quiet (low listening level) situations, adjust the gain stages by setting the Volume to ‘0’ or lower and increase the input level of the audio source.
SYSTEM CONTROLS
- VOLUME – Volume knob sets the input system gain. The usual scenario is to set the knob at the middle setting and adjust the input level from your audio source. Use the volume knob to match the left and right studio monitors.
- HF ADJUSTMENT – The High Frequency adjustment may be used to tailor a listening style preference. The factory setting is flat (knob is in the FLAT position).
- LF ADJUSTMENT – The Low Frequency adjustment may be used to adjust for the room acoustics and personal preference. Room acoustics may dictate which type of adjustment you need to make to retain the proper frequency response from the studio monitor. For example, placement near a wall or corner will boost the low frequencies.
- BALANCED INPUT – The XLR & TRS input jack is connected to your audio equipment outputs, such as a mixing console or audio interface. Only connect one input source at a time.
- UNBALANCED INPUT – The RCA input jack is connected to your audio equipment outputs, such as an audio interface, computer, DJ gear and mobile device. Only connect one input source at a time.
- AC INPUT INLET SOCKET & FUSE HOLDER – A standard IEC-type AC Inlet Socket is used to provide power to the studio monitor. Below the socket is a fuse holder that contains two fuses (one spare).
The left and right studio monitors should be approximately 1 to 1.5 meters (3
to 5 feet) apart and directed at a 60-degree angle towards the listening
location. Measure the distance between the left and right studio monitors and
note the listening position is equal distance to both sides. This will form an
equilateral triangle. It is important that both left and right studio monitors
are level matched.
The Classic series is a two-way studio monitor with a tweeter (producing high
frequencies) and a woofer (producing mid and low frequencies) in one
enclosure. In between the tweeter and woofer is the acoustic axis point where
the full frequency range comes together. The ideal location for the acoustic
axis point is located at ear level in the listening position. It is acceptable
to angle the studio monitors so the acoustic axis is in the correct direction.
KRK PRODUCT WARRANTY
ABOUT YOUR WARRANTY
If used in strict accordance with KRK instructions and only for products
operated in the United States, KRK Systems warrants parts and labor on all
monitors and grill accessories for a period of three (3) years from the
original date of purchase for all products purchased from a US Authorized
Dealer. For goods purchased outside of the United States, please contact your
local dealer or distributor for specific information on warranty terms and
conditions. For Expose Series recording monitors, refer to the dedicated
Expose Series warranty card and policy. KRK Systems warrants parts and labor
on all headphones, computer audio devices, including room correction devices,
for a period of one (1) year from the original date of purchase. Defective
parts will be repaired under this warranty when a defect occurs under normal
installation and use.
- This warranty is limited to repair of parts and replacements necessitated by defective workmanship or materials. KRK accepts no responsibility for damage or malfunction which, in the sole opinion of KRK
- Systems, is the result of misuse, abuse, neglect, accident, shipping damage or unauthorized repair. Any such misuse, abuse, neglect, accident, shipping damage or unauthorized repair will result in the voiding of this warranty.
- Except as set forth herein, KRK Systems makes no representations or warranties, whether expressed or implied, including any implied warranties of merchantability or suitability for a particular purpose, all of which are expressly waived and disclaimed hereby, as to any KRK Systems products.
- In no event shall KRK Systems be liable for special, incidental, consequential, punitive, or indirect damages, including without limitation loss of profits or loss of data. For any action brought against KRK Systems, whether intort, contract or any other theory of law, in no event shall KRK Systems’ liability exceed the total amount paid by the purchaser to an authorized dealer or representative for the product given rise to the underlying claim.
- Some states and countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This warranty only applies to KRK Systems products purchased by the consumer from an authorized KRK dealer.
- To contact a Gibson Customer Service Representative, call 1.800.4GIBSON or email service@gibson.com. For support in Europe, please call 00+800.4GIBSON1 or email service.europe@gibson.com. All other regions, please contact 1.615.871.4500 or email service@gibson.com.
QR SCAN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>