PLANET GUP-805A-95W 802.3bt PoE++ Media Converter User Manual
- June 12, 2024
- PLANET
Table of Contents
PLANET GUP-805A-95W 802.3bt PoE++ Media Converter
Product Information
The PLANET GUP-805A 100/1000BASE-X SFP to 10/100/1000BASE-T 802.3bt PoE++ Media Converter series is a versatile device that allows media conversion between 10/100/1000BASE-T and 100BASEFX/1000BASE-SX/LX. It comes in two models: GUP-805A-60W and GUP-805A-95W, with different PoE budgets and speeds. The GUP-805A-60W supports IEEE 802.3af/at/bt PoE standard with a PoE budget of 60 watts, while the GUP-805A-95W supports the same PoE standard with a higher budget of 95 watts. Both models have a LAN port speed of 10/100/1000Mbps and a SFP slot speed of 100/1000BASE-X.
Package Contents
- GUP-805A Series Media Converter x 1
- QR Code Sheet x 1
- AC-DC Adapter (Output: 52V~55V DC) x 1
- AC Power Cord x1
Note: The mini GBIC SFP module is not included in the package.
Product Usage Instructions
- Unpack the box of the GUP-805A series carefully.
- Check if all the package contents are present andundamaged.
- If any item is missing or damaged, consult the dealer from whom you purchased your GUP-805A series Gigabit Ethernet 802.3bt PoE++ Media Converter.
- Connect the GUP-805A Media Converter to your network setup.
- Scan the QR code provided to access the online User’s Manual or Quick Installation Guide.
- Follow the instructions in the manual or guide to complete the setup process.
If you need further assistance, you can visit the PLANET online FAQs at http://www.planet.com.tw/en/support/faq or contact technical support at support@planet.com.tw
Package Contents
Thank you for purchasing PLANET GUP-805A 100/1000BASE-X SFP to 10/100/1000BASE-T 802.3bt PoE++ Media Converter series. In the following sections, the term “GUP-805A series” means the GUP-805A-60W or GUP-805A-95W.
| Model | PoE Standard | PoE Budget | LAN Port Speed | SFP Slot Speed |
|---|---|---|---|---|
| GUP-805A-60W | IEEE 802.3af/ |
at/bt
| 60 watts| 10/100/
1000Mbps
| 100/
1000BASE-X
GUP-805A-95W| IEEE 802.3af/
at/bt
| 95 watts| 10/100/
1000Mbps
| 100/
1000BASE-X
Please unpack the box of the GUP-805A series carefully, and the box should contain the following items:
GUP-805A Series Media Converter x 1
AC-DC Adapter (Output: 52V~55V DC) x 1
AC Power Cord x1
If any item is missing or damaged, please consult the dealer from whom you purchased your GUP-805A series Gigabit Ethernet 802.3bt PoE++ Media Converter.
Note
The GUP-805A-60W and GUP-805A-95W comes with one vacant SFP module slot.
The mini GBIC SFP module is not included in the package.
Product Features
Physical Port
- Media conversion between 10/100/1000BASE-T and 100BASEFX/ 1000BASE-SX/LX
- Copper RJ45 interface with Data + Power output
- Copper port supports 10/100/1000BASE-T auto-negotiation and auto- MDI/MDI-X.
- Fiber media allows
- Multi-mode fiber using LC connector
- Single-mode fiber using LC connector
- Power over Ethernet
- Compatible with IEEE 802.3bt Power over Ethernet plus plus end-span + mid-span PSE
- Backward Compatible with IEEE 802.3at Power over Ethernet plus endspan/ mid-span PSE
- Provides DC 52V~55V power over RJ45 Ethernet cable to devices with Ethernet port
- RJ45 PoE++ port with built-in 802.3bt type-4 PoE 60W or 95W injector function
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m
- IEEE 802.3bt/IEEE 802.3at splitter devices compatibility
- Layer 2 Features
- Store-and-Forward mechanism
- Non-blocking full wire-speed forwarding rate
- IEEE 802.1Q Tag VLAN transparent, multicast pass through
- 9K jumbo frame
- IEEE 802.3x full-duplex and half-duplex back-pressure flow control to eliminate the loss of packets
- Mechanical
- Metal case
- LED indicators for easy network diagnostics
- DIP switch for PoE power feeding options (BT/UPOE/Legacy) selection
- DC 52V~55V power input socket
- Wall mounting or DIN-rail installation (optional)
- Compact in size, easy installation
Product Outlook
Front View
There are one RJ45 twisted-pair jack (auto-MDI/MDI-X), one 100/1000X
fiberoptic SFP slot and four LED indicators, and one DIP switch for
BT/UPOE/Legacy PoE power feeding options.
Figure 1: Front Panel of the GUP-805A Series
LED Indication
System
| LED | Color | Function |
|---|
PWR
|
Green
| Lit| To indicate that the GUP-805A series has power.
Off| To indicate that the power is not detected.
10/100/1000BASE-T 3bt PoE++ Port
| LED | Color | Function |
|---|
PoE-in- Use
|
Amber
| Lit| To indicate the RJ45 port is providing PoE in-line power.
Off| To indicate the RJ45 port is not providing PoE in-line power.
LNK/ACT
|
Green
| Lit| To indicate the link through TP port is successfully established.
Blink| To indicate the port is actively sending or receiving data.
Off| To indicate that the copper port is linked down.
100/1000BASE-X SFP Slot
| LED | Color | Function |
|---|
Fiber LNK/ACT
|
Green
| Lit| To indicate the link through fiber port is
successfully established.
Blink| To indicate the fiber port is actively sending or
receiving data.
Off| To indicate that the fiber optic port is linked
down.
DIP Switch
| PoE Mode | Function |
|---|
BT
(Default)
| This mode makes the GUP-805A series fully support IEEE 802.3af/at/bt
standards.
UPOE| This mode makes the GUP-805A series fully support Cisco UPoE or
PoH standards
Legacy
| The legacy detection is to identify the valid current signature of the PDs that do not fully follow the IEEE 802.3af/at/bt standard. This protects against damage to the PDs as the right PoE mode is applied.
Please power on the device after changing the DIP switch mode.
Rear View
There is also one DC 52V ~ 55V power socket for the GUP-805A series Gigabit
Ethernet 802.3bt PoE++ Media Converter.
Power Information
The power jack of the Gigabit Ethernet 802.3at PoE+ Media Converter measures
2.1mm in diameter, and comes with DC 52V~55V power input. It conforms to the
bundled AC-DC adapter. Should you have the issue of making the power
connection, please contact your local sales representative.
2.1mm
DC Receptacle 2.1mm, DC 52~55V
DC receptacle is 2.1mm wide that conforms to the Ethernet Extender 2.1mm DC
jack’s central post. Do not install any improper unit.
Installing The Converter
To install the GUP-805A series, simply complete the following steps:
Ethernet Installation
Step 1: Turn off the power of the device/station in a network to which
the GUP-805A series will be attached.
Step 2: Ensure that there is no activity in the network.
Step 3: Attach fiber cable from the GUP-805A series to the fiber network.
Step 4: Attach a Cat.5/5e/6 UTP cable from the 10/100/1000BASE-T
networkto the RJ45 port on the GUP-805A series.
Step 5: Connect the 52V~55V DC power adapter to the GUP-805A series and
verify that the Power LED lights up.
Step 6: Turn on the power of the device/station; the TP Link and SFP
Fiber Link LEDs should light up when all cables are attached.
- It is recommended to use PLANET MFB/MGB series 100/1000BASE-FX/SX/LX SFP on the GUP-805A series. If you insert an SFP transceiver that is not supported, the GUP-805A series will not recognize it.
- Please check the link of your SFP transceivers and its physical wiring distance. In some installation, an in-line optical attenuator may be required to protect your transceivers.
- RJ45/STP, UTP Cat5/5e/6, or straight/crossover cable is accepted; refer to section 8 for more about the wiring distance of your TP and optic-fiber networks.
PoE++ Function
The installation of the GUP-805A Series and the IEEE 802.3bt/802.3at
Injector/Splitter.
Before your installation, it is recommended to check your network environment.
If there is any IEEE 802.3bt/802.3at devices that need to be powered on, the
GUP-805A series can provide you with a way to supply power for this Ethernet
device conveniently and easily. The GUP-805A series equips an AC-DC adapter
with DC 52V~55V input and it injects the DC power into the pin of the twisted-
pair cable (Pins 1, 2, 3 6 and Pins 4, 5, 7, 8).
For the places hard to find the power inlet, the GUP-805A series provides the
easiest way to power your powered device such as laptops, Thin Client, POS
System, PTZ (pan, tilt & zoom) network cameras, PTZ speed dome, color touch-
screen IP phones, multi-channel wireless LAN access points via PLANET IEEE
802.3bt/802.3at Power over Ethernet Splitter (POE-173S/162S/161S)b over a long
distance if necessary.
Duplex Mode Support
The GUP-805A series TP port supports triple-speed — 10/100/1000BASE-T auto-
negotiation. It will auto-detect the link speed and the duplex mode by default
with its link partner. The fiber port (100/1000BASE-FX/SX/LX) allows
100/1000Mbps full duplex by auto-negotiation. Please also check the setting of
the link partner as well.
Cable Connection Parameter
The wiring details are shown below:
-
Duplex/Connection/Limitation (max.)
-
Twisted Pair
Half/Full Node to Node Node to Switch/Hub 100 meters -
Fiber Optic Cables:
Standard 1000BASE-SX 100BASE-FX 1000BASE-LX
(Wavelength) (1310nm) (1310nm) 1000BASE-SX
Fiber Type & Cable Multi-mode 50/125μm or 62.5/125μm
Specifications Single-mode 9/125μm
Product Specifications
| Model | GUP-805A-60W | GUP-805A-95W |
|---|
Interface
__
Copper Port
| 10/100/1000BASE-T Ethernet RJ45 interface Auto- negotiation, auto MDI/MDI-X
with PoE injector function
SFP Interface| 100/1000BASE-X SFP interface
Fiber Mode| May vary on SFP Module
Fiber Port Type (connector)| SFP, LC type
Fiber Maximum Distance| May vary on SFP Module
Power Over Ethernet
__
PoE Output
| IEEE 802.3af Power over Ethernet PSE IEEE 802.3at Power over Ethernet Plus PSE
IEEE 802.3bt Power over Ethernet Plus Plus PSE
Power Output| PoE 52-55V DC, 60
watts
| PoE 52-55V DC, 95
watts
PoE Power Budget| 60 watts| 95 watts
PoE Power Supply Type| End-span + Mid-span
__
Power Pin Assignment
| 802.3bt: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
End-span: 1/2(-), 3/6(+)
Mid-span: 4/5(+), 7/8(-)
Hardware Specifications
Enclosure| Metal case
Dimensions (W x D x H)| 94 x 70 x 26 mm
Weight| 144g
__
__
LED
| System: PWR (Green)
Fiber 100/1000BASE-X: LNK/ACT (Green) TP 10/100/1000BASE-T: LNK/ACT (Green)
PoE: Power-in-use (Amber)
DIP Switch| PoE power feeding options (BT/UPOE/Legacy) selection
Power Supply| DC 52V~55V Power Socket, external AC-to-DC adapter
---|---
Installation| Wall-mount or DIN-rail installation (Optional)
Layer 2 Features
Switch Architecture| Store-and-Forward
Forwarding Rate| Non-blocking full wire-speed forwarding rate
Flow Control| Back pressure for half duplex mode
IEEE 802.3x pause frame for full duplex mode
Maximum Frame Size| 9K
Standards Conformance
Regulatory Compliance| FCC Part 15 Class A, CE
__
__
__
Protocols and Standards Compliance
| IEEE 802.3 Ethernet
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3ab Gigabit Ethernet over TP
IEEE 802.3z Gigabit Ethernet over Fiber Optic IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus
IEEE 802.3bt Power over Ethernet Plus Plus
__
__
Cables
| TP: Cat 3/4/5/5e/6 UTP cable
Fiber: Multi-mode: 50/125µm or 62.5/125µm optic
fiber
Single-mode: 9/125µm optic fiber
Environment
Temperature| Operating: 0 ~ 50 degrees C
Storage: -10 ~ 70 degrees C
Humidity| 5% ~ 95% non-condensing
- For connection to the Gigabit Ethernet products, please refer to the device’s technical manual.
- Consult your dealer for DIN-rail installation.
Customer Support
Thank you for purchasing PLANET products. You can browse our online FAQ resource and User’s Manual on PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANETswitch support team.
- PLANET online FAQs:
- Switch support team mail address:
- support@planet.com.tw
- Copyright © PLANET Technology Corp. 2023.
- Contents are subject to revision without prior notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>