Govee H6278 RGB LED TV Backlight User Manual

Govee H6278 RGB LED TV Backlight

Safety Instructions

Read and follow all the safety instructions:

• The product is not water resistant, be cautious when installing and using.
• Use the product with the provided power adapter only.
• Be cautious of static electricity during installation and usage. Keep the product away from sharp objects or strong corrosive chemicals.
• When bending the strip lights during installation, avoid folding the LED components as it may affect the product’s life span.
• Remove nails, metal, or other conductive objects from the installation surface before attaching the strip light, as it may cause short-circuiting.
• Do not install the strip light near any heat sources.
• Do not allow children to install the strip light alone.
• Avoid installing the strip light near potentially dangerous sources (e.g., candles, liquid-filled objects).
• Unroll the strip lights before powering them on.

Introduction

Thanks for choosing the Govee RGB LED TV Backlights. This TV backlight is equipped with a 3m-length strip light. It is powered by a USB power supply port and supports app control.

What You Get

At a Glance

Installing Steps

1. Wipe the surface to make sure it’s clean and dry.
2. Peel off the protective film on the tape, stick the strip on and press over it firmly.
3. Peel off the protective film on the control box and stick it on. Place the control box close to the music source to achieve the best music effect.
4. Power on the strip lights and start using.

Pairing Your Device with the Govee Home App

Pairing Instructions

1. Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
2. Turn on Bluetooth on your smartphone.
3. Open the app, tap the “+” icon in the top right corner and search for “H6178”.
4. Tap the device icon and follow the on-screen instructions to Complete pairing.

Specifications

Troubleshooting

1. The strip light flickers or the light is not bright enough.

   • Plug out the USB port and re-plug it in.
   • Power on the strip lights with a 5V USB adapter.
     ( Notice: The adapter is NOT included).

2. The adhesive tape is not strong enough.

   • Make sure the installation surface is clean and dry.
   • Firmly press over the strip after sticking.
   • Reinforce the installation via more clips and tape.

3. The control box doesn’t work. Re-plug in the USB port and try again.

4. Cannot connect to Bluetooth.

   • Do not skip Bluetooth connection in the app.
   • Make sure Bluetooth in your mobile phone has been turned on.
   • It may be caused by incompatibility between the phone system and the app. Please change to another mobile phone and connect again.
   • Re-power on the strip and re-turn on Bluetooth in your phone to try again.
   • Keep the distance between the strip and the phone less than 1m/3.28ft while connecting
   • Keep obstructions between the strip and the phone as few as possible.

5. The strip doesn’t match the same color /Some lamp beads don’t light up. Please contact Govee support team in time for return.

Customer Service

Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: [email protected]
Official Website: www.govee.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>