Cobra RAD380 Radar, Laser Detector User Guide

Cobra RAD380 Radar, Laser Detector

THANK YOU! For purchasing the new COBRA® RAD 380

Features

RAD 380 Features

Mounting

Mounting to the Windshield

1. Assemble the Suction Cup Bracket.
2. Adjust the Suction Cup Bracket to ensure your RAD 380 has a level view of the road.
3. Attach the Suction Cup Bracket to Windshield.
4. Attach RAD 380 to Suction Cup Bracket.
5. Connect Detector to 12V Power Source.

Mounting to the Dashboard

1. Attach Hook & Loop to Detector.
2. Attach Detector to Dashboard Surface.
3. Connect Detector to 12V Power Source.

Full manual available at: www.cobra.com.

FCC STATEMENT

FCC ID: BBDRAD03. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:

1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT ANY

INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
FCC NOTE: Modifications not expressly approved by the manufacturer could void the user’s FCC-granted authority to operate the equipment.

• Cobra® and the snake design are registered trademarks of Cobra Electronics Corporation, USA.
• Cobra Electronics Corporation™ is a trademark of Cobra Electronics Corporation.USA.
• Other trademarks and trade names are those of their respective owners.

©2020 Cobra Electronics Corporation Printed in the Philippines.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>