DigiTech BC281 Riding Device User Manual

DigiTech BC281 Riding Device User Manual

Product Description and Specifications

• DTK5 Remote

• BC281 Display

Parts Description

DTK5 Remote Dimensions

Function introduction

Features

BC281 supports the common riding parameters and statistical results, as well as some useful functions:

• Real-time speed, Max speed, Average speed
• Real-time motor power
• Battery indicator
• Assistant level
• Odometer, trip
• Trip time
• Calorie burnt
• Light indicator
• Metric(km/h)/Imperial(mph) switching
• Error codes indicator
• Auto headlights, Brightness adjustment, automatic backlight
• Auto Power-off
• USB Port（5V/500mA）

In addition, the Bluetooth version also supports the following functions:

• APP connection
• Data synchronization
• Riding ranking
• Riding track recording

Buttons Functions

1. Power on/off
2. Setting confirmation

| |

1. Parameter adjustment
2. Menu operation

| |

1. Parameter adjustment
2. Push mode on/off
3. Menu operation

| |
| |

Operation

Power on/off

Long press the [ ] button to power on, the boot interface will be shown for about 1.5s, followed by the
riding interface:

In any interface, long press the [ ] button, the shutdown interface will be shown for about 2s before power off:

Riding interface

BC281 provides various styles of riding interface, which can be switched by clicking the [ ] button:

1. Simple mode
   

2. Sports Mode
   

3. Statistical Mode
   

Assist level switch

Click [ ] or [ ] to switch assist levels;

Press and hold the [   ] button to enter the push mode, and release to exit.

Error Code

Common error codes are as follows(Only for reference, depending on other electrical parts of the ebike):

KM5S protocol Error Code

Li2 protocol Error Code

User Menu

To enter the user menu, please long press the [ ] button for 2s on the riding interface when static.

To ensure the user’s safety, it can only be accessed when static (when the speed is 0). In this interface, you can switch the submenu by clicking the [ ] or [ ] button, and enter the submenu by clicking the [ ] button

Clear Data

Clear Trip Data
Select “Trip Distance” and click the [ ] button to enter it, you can clear the trip distance or not  under the guidance of the interface prompts.

[Note] The trip time, max speed, average speed, and calories burnt will be also cleared by this operation.

Factory Reset
Select “Factory Reset” and click the [ ] button to enter it, you can reset the parameters:

Setup

Auto Headlight
Select Auto Headlight and click the [ ] button to enter the submenu, you can enable or disable the automatic headlight function:

Set Unit
Select Set Unit and click the [ ] button to enter the submenu, you can select the unit:

Set Brightness
Select Set Brightness and click the [ ] button to enter the submenu, you can use the [ ] or [ ] button to adjust the backlight brightness level in the range of 0-5:

Set Auto Power-Off
Select Auto Power-Off and click the [ ] button to enter the submenu. You can use the [ ] or [ ] button to adjust the automatically power off time in the range of 0-99, where 0 means not to automatically power off:

System Info.
Enter System Info, to view system information：

Connect to APP (only for Bluetooth version)

1. can the following QR code to download the APP:
   

2. Select Connect to APP in the user menu to get the Bluetooth connection QR code, and scan it with the APP to connect:
   

Attentions

1. Be sure to power of first before connecting and disconnecting the cable, or the display will be totally
   damaged;

2. When fix the display to the ebike, please ensure that the torque of the screwdriver is about 0.2Nm (DO NOT EXCEED 0.6Nm), or it will cause damages to the handle;

3. Do not put the display into water;

4. The display can be wiped with wet and soft cloth, but DO NOT use any chemical liquid or spray on the display;

5. Please abide by local laws and regulations when scrapping, discard or recycle in an environmentally friendly way, and do not discard the instrument or any accessories as resident waste;

6. The damage and failure of the instrument caused by improper installation or use are not covered by the after-sale warranty.

7. For more information and support, please contact support@riding-evolved.com.

References

• evolved.com
• Company Home

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>