Whirlpool W4OMK58RU1BA 60cm Multi Function Hybrid Clean Oven User Guide
- June 12, 2024
- Whirlpool
Table of Contents
Whirlpool W4OMK58RU1BA 60cm Multi-Function Hybrid Clean Oven
Product Information
Thank you for purchasing a Whirlpool product. To receive complete
assistance, please register your product at
www.whirlpool.eu/register.
Control Panel Description
- Selection Knob: Used to switch the oven on/off by selecting a function.
- Light: Press to turn the oven compartment lamp on/off.
- Setting the Time: Access cooking time settings, delayed start, and timer. Also displays the time when the oven is off.
- Display: Shows information and settings.
- Adjustment Buttons: Used to change cooking time settings.
- Thermostat Knob: Turn to select the desired temperature when using manual functions.
Please note: The type of knobs may vary depending on the model. If the knobs are push-activated, push down on the center of the knob to release it from the seating.
Sliding Shelves and Shelf Guides
Before using the oven, remove the protective tape [a] and the protective
foil [b] from the sliding runners.
- Removing the Sliding Runners [c]: Pull the lower part of the sliding runner to uncouple the lower hooks (1), then pull the sliding runners upwards to remove them from the upper hooks (2).
- Refitting the Sliding Runners [d]: Hook the upper hooks on the shelf guides (1), then press the lower part of the sliding runners against the shelf guide until the lower hooks click into place (2).
Removing and Refitting the Shelf Guides
- To remove the shelf guides: Firmly grip the external part of the guide and pull it towards you to extract the support and the two internal pins from the lodging.
- To reposition the shelf guides: Position them near the cavity and initially insert the two pins into their lodgings. Next, position the external part near its lodging, insert the support, and firmly press toward the wall of the cavity to secure the shelf guide properly.
Product Usage Instructions
First Time Use
- Setting the Time: When switching on the appliance for the first time, press until the hour icon starts flashing on the display. Use the arrow buttons to set the hour and press to confirm. The minutes will start flashing. Use the arrow buttons to set the minutes and press to confirm. Note: After lengthy power outages, you will need to reset the time when the hour icon is flashing.
- Set the Power Consumption: By default, the oven is programmed to work at a power higher than 3 kW (Hi). To change it to a power compatible with a domestic power supply of less than 2.9 kW (Lo), follow these steps:
- Turn the selection knob to the icon.
- Turn it back to the original position.
- Press and hold the adjustment buttons for five seconds immediately afterward.
- Use the arrow buttons to change the setting and press and hold for at least two seconds to confirm.
Functions & Daily Use
Heat the Oven: A new oven may release odors from manufacturing. To
remove any possible odors, heat the empty oven before cooking food. Remove any
protective cardboard or transparent film from the oven and remove any
accessories from inside it.
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive more complete assistance, please register your product
Before using the appliance carefully read the Safety Instructions.
CONTROL PANEL DESCRIPTION
-
SELECTION KNOB
Switching the oven on by selecting a function. Turn the position to switch the oven off. -
LIGHT
With the oven switched on, press to turn the oven compartment lamp on or off. -
SETTING THE TIME
For accessing the cooking time settings, delayed start, and timer. For displaying the time when the oven is off. -
DISPLAY
-
ADJUSTMENT BUTTONS
For changing the cooking time settings. -
THERMOSTAT KNOB
Turn to select the temperature you require when activating manual functions.
Please note: Type of knobs may vary from model type. If the knobs are push-activated, push down on the center of the knob to release it from the seating.
SLIDING SHELVES AND SHELF GUIDES
Before using the oven remove the protective tape [a] and then remove the
protective foil [b] from the sliding runners.
REMOVING THE SLIDING RUNNERS [c]
Pull the lower part of the sliding runner to uncouple the lower hooks (1) and
pull the sliding runners upwards, removing them from the upper hooks (2).
REFITTING THE SLIDING RUNNERS [d]
Hook the upper hooks on the shelf guides (1) then press the lower part of the
sliding runners against the shelf guides, until the lower hooks are clicking
(2).
FIRST TIME USE
SETTING THE TIME You will need to set the time when you switch on the appliance for the first time: Press until the icon and the two digits for the hour start flashing on the display. Use + or – to set the hour and press to confirm. The two digits for the minutes will start flashing. Use + or – to set the minutes and press to confirm.
REMOVING AND REFITTING THE SHELF GUIDES
- To remove the shelf guides, firmly grip the external part of the guide, and pull it towards you to extract the support and the two internal pins from the lodging.
- To reposition the shelf guides, position them near the cavity and initially insert the two pins into their lodgings. Next, position the external part near its lodging, insert the support, and firmly press toward the wall of the cavity to make sure
the shelf guide is properly secured.
Please note: When the icon is flashing, for example following lengthy power outages, you will need to reset the time.
SET THE POWER CONSUMPTION
By default, the oven is programmed to work at a power higher than 3 kW (Hi):
To operate the oven at a power that is compatible with a domestic power supply
of less than 2,9 kW (Lo), you will need to change the settings. To go to the
changing menu, turn the selection knob to the icon, then turn it back to Press
and hold and for five seconds immediately afterward. Use or change the
setting, then press and hold for at least two seconds to confirm.
HEAT THE OVEN
A new oven may release odors that have been left behind during manufacturing:
this is completely normal. Before starting to cook food, we, therefore,
recommend heating the oven with it empty in order to remove any possible
odors. Remove any protective cardboard or transparent film from the oven and
remove any accessories from inside it. Heat the oven to 250 °C for about one
hour. The oven must be empty during this time. Please note: It is recommended
to ventilate the room after using the appliance for the first time.
FUNCTIONS & DAILY USE
CONVENTIONAL
For cooking any kind of dish on one shelf only. RISING For helping the sweet
or savory dough to rise effectively. Turn the thermostat knob to the icon to
activate this function.
FORCED AIR
For cooking different foods that require the same cooking temperature on
several shelves (maximum three) at the same time. This function can be used to
cook different foods without odors being transferred from one food to another.
PIZZA
For baking different types and sizes of pizza and bread. It is a good idea to
swap the position of the baking trays halfway through cooking.
ECO FORCED AIR
For cooking roasts and stuffed roasting joints on a single shelf. Food is
prevented from drying out excessively by gentle, intermittent air circulation.
When this ECO function is in use, the light will remain switched off during
cooking but can be switched on again by pressing it.
GRILL
For grilling steaks, kebabs, and sausages, cooking vegetables au gratin, or
toasting bread. When grilling meat, we recommend using a DRIP TRAY to collect
the cooking juices: position the pan on any of the levels below the wire shelf
and add 200 ml of drinking water.
TURBO GRILL
For roasting large joints of meat (legs, roast beef, chicken). We recommend
using a DRIP TRAY to collect the cooking juices: position the pan on any of
the levels below the wire shelf and add 200 ml of drinking water.
MAXI COOKING
For cooking large joints of meat (above 2.5kg). We recommend turning the meat
over during cooking to ensure that both sides brown evenly. We also recommend
basting the joint every so often to prevent it from drying out excessively.
BREAD AUTO
This function automatically selects the ideal temperature and baking time for
bread. For best results, carefully follow the recipe. Activate the function
when the oven is cold. The thermostat knob needs to remain in position as the
temperature is set automatically by the function.
PASTRY AUTO
This function automatically selects the ideal temperature and baking time for
cakes. Activate the function when the oven is cold. The thermostat knob needs
to remain in position as the temperature is set automatically by the function.
FLEXI CLEAN PACK SMART CLEAN
The action of steam released during this special low-temperature cleaning
cycle allows dirt and food residues to be removed with ease. To activate the
“Smart Clean” function, pour 100-120ml of drinking water on the bottom of the
oven then turn the selection knob and the thermostat knob to the icon. and
only. Activate the function when the oven is cold. The position of the icon
does not correspond to the temperature reached during the cleaning cycle.
AUTOMATIC CLEANING – PYRO
For eliminating cooking spatters use a cycle at a very high temperature. To
activate this function moves the thermostat knob. The position of the icon
does not correspond to the real temperature reached during the cleaning cycle.
SELECT A FUNCTION
To select a function, turn the selection knob to the symbol for the function
you require: the display will light up and an audible signal will sound.
ACTIVATE A FUNCTION MANUAL To start the function you have selected, turn the thermostat knob to set the temperature you require. Please note: During cooking, you can change the function by turning the selection knob or adjusting the temperature by turning the thermostat knob. The function will not start if the thermostat knob will be in position. You can set the cooking time, cooking end time (only if you set a cooking time), and a timer.
RISING To start the “Rising” function, turn the thermostat knob to the
Rising position (40 deg) and put the function knob in the Conventional
position; if the oven is set to a different temperature, the function will not
start.
Please note: You can set the cooking time, cooking end time (only if you set a
cooking time), and a timer.
PREHEATING AND RESIDUAL HEAT
Once the function starts, an audible signal and a flashing icon on the display indicate that the preheating phase has been activated. At the end of this phase, an audible signal and the fixed icon on the display will indicate that the oven has reached the set temperature: at this point, place the food inside and proceed with cooking. Please note: Placing the food in the oven before preheating has finished may have an adverse effect on the final cooking result. After cooking and with the function deactivated, the icon may continue to remain visible on the display even after the cooling fan has been switched off to indicate that there is residual heat in the compartment. Please note: The time after which the icon switches off varies because it depends on a series of factors such as ambient temperature and function used. In any case, the product should be considered to be off when the pointer on the selection knob is at “0”.
PROGRAMMING COOKING
You will need to select a function before you can start programming cooking.
DURATION
Keep pressing until the icon and “00:00” start flashing on the display. Use +
or – to set the cooking time you require, then press to confirm . Activate the
function by turning the thermostat knob to the temperature you require: an
audible signal will sound and the display will indicate that cooking is
complete. Please note: To cancel the cooking time you have set, keep pressing
until the icon starts flashing on the display, then use it to reset the
cooking time to “00:00”. This cooking time includes a
preheating phase.
PROGRAMMING THE END COOKING TIME/ DELAYED START
After a cooking time has been set, starting the function can be delayed by
programming its end time: press until the icon and the current time start
flashing on the display. Use + or – to set the time you want cooking to end
and Press to confirm. Activate the function by turning the thermostat knob to
the temperature you require: the function will remain paused until it starts
automatically in time calculated based on the selected cooking end time.
Please note: To cancel the setting, switch the oven off by turning
the selection knob to the position. Delay to start functionality is not
available for Grill and Turbo Grill functions.
END OF COOKING
An audible signal will sound and the display will indicate that the function
has finished. Turn the selection knob to select a different function or to
switch the oven off. Please note: If the timer is active, the display will
show “END” alternately with the remaining time.
SETTING THE TIMER
This option does not interrupt or program cooking but allows you to use the
display as a timer, either while a function is active or when the oven is off.
Keep pressing until the icon and “00:00” start flashing on the display. Use +
or – to set the time you require and press to confirm . An audible signal will
sound once the timer has finished counting down the selected time.
Notes: To cancel the timer, keep pressing until the icon starts flashing,
then use it to reset the time to “00:00”.
AUTOMATIC CLEANING FUNCTION – PYRO
Do not touch the oven during the Pyro cycle. Keep children and animals away
from the oven during and after running the Pyro cycle, until the room has
finished airing. Remove all accessories – including shelf guides – from the
oven before activating the function. If the oven is installed below a hob,
make sure that all the burners or electric hotplates are switched off while
running the self-cleaning cycle. For optimum cleaning results, remove
excessive residuals inside the cavity and clean the inner door glass before
using the pyrolytic function. Avoid activating the pyro cycle cleaning in the
presence of limescale residues. We recommend only running the Pyro function if
the appliance contains heavy soiling or gives off bad odors during cooking.
To activate the automatic cleaning function, turn the selection knob and the thermostat knob to the icon. The function will be activated automatically, the door locked and the light inside the oven switched off: The display will show the time remaining to the end, alternating with “Pyro”. Once the cycle has been completed, the door remains locked until the temperature inside the oven has returned to a safe level. Air the room during and after running the Pyro cycle.
COOKING TABLE
Turn food two-thirds of the way through cooking (if necessary). The level is
indicated on the wall of the cooking compartment. The time indicated does not
include the preheating phase: we recommend placing the food in the oven and
setting the cooking
time only after the required temperature has been reached.
TROUBLESHOOTING
Policies, standard documentation, and additional product information can be found by:
- Visiting our website docs. whirlpool. EU
- Using QR Code
- Alternatively, contact our After-sales Service (See phone number in the warranty booklet).
- When contacting our After-sales Service, please state the codes provided on your product’s identification plate. Model: xxxXXXXxx XXXXXXXXXXXXXX
Download the complete Daily Reference Guide for more pieces of information about your product For markets outside Europe: To register your product and to receive more comprehensive local help and support, please call the number shown on the warranty booklet specific to your country or follow the website’s instructions on: Australia: www.whirlpool.com.au
References
- Whirlpool Docs
- Whirlpool Australia | Kitchen & Laundry Appliances
- Whirlpool Australia | Kitchen & Laundry Appliances
- Whirlpool Singapore | Home appliances | Kitchen appliances | Electrical Appliances
- 台灣惠而浦 Whirlpool
- Trang chủ - Whirlpool
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>