Aqara WB-R02D Wireless Mini Switch T1 User Manual

: June 12, 2024
: Aqara

Table of Contents

**Aqara WB-R02D Wireless Mini Switch T1 User Manual
Product Introduction
Device Binding & Initialization
Product Specifications
Warnings
Caution
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**Aqara WB-R02D Wireless Mini Switch T1 User Manual

Wireless Mini Switch T1
**

Product Introduction

Aqara Wireless Mini Switch T1 is a new-type wireless remote switch, which supports three control modes, namely click, double-click and long press. It may be placed at the required position randomly or it may be pasted for installation and use. It executes abundant smart scenes by linking with the hub and matching other smart devices.

An Aqara hub is required. Some functions require specific models of the Aqara hub. Please visit www.aqara.com/support for more details.

Device Binding & Initialization

Before activating the accessory, please make sure you have the Aqara Home downloaded and Aqara hub installed.
2. Please open the app,”tap Home”and then tap”+”in the top right corner to enter “Add Device (Accessory)”page.
Select”Wireless Mini Switch T1″, and add it according to instructions.
For details, please see www.aqara.com/support or scan the QR code below to get the detailed electronic manual.

https://prd.aqara.com/manual/?mid=manual.1094919369124102144

If the connection fails, please move the accessory closer to the Hub and try again

Product Specifications

Wireless Mini Switch T1
Model: WB-R02D
Battery: CR2032
Wireless Protocols : Zigbee 3.0
Dimensions: ⌀45 × 45 × 12 mm (1.77 × 1.77 × 0.47 in.)
Zigbee Operation Frequency: 2405-2480 MHz
Zigbee Maximum Output Power ≤ 13 dBm
Operating Temperature: -10°C ~ 50°C (14°F ~ 122°F)
Operating Humidity : 0 ~ 95% RH, no condensation
What is in the Box: Wireless Mini Switch T1 × 1, Sticker × 1, User Manual × 1

Manufacturer : Lumi United Technology Co., Ltd.
Address: Room 801-804, Building 1, Chongwen Park, Nanshan iPark, No. 3370, Liuxian Avenue, Fuguang Community, Taoyuan Residential District, Nanshan District, Shenzhen, China
Online Customer Service: www.aqara.com/support
Email: support@aqara.com

Warnings

This product is NOT a toy. Please keep children away from this product.
This product is designed for indoor use only. Do NOT use in humid environments or outdoors.
Beware of moisture, do NOT spill water or other liquids onto the product.
Do NOT place this product near a heat source. Do NOT place it in an enclosure unless there is normal ventilation.
Do NOT attempt to repair this product by yourself. All repairs should be performed by an authorized professional.
This product is only suitable for improving the entertainment, convenience of your home life and reminding you about the device status. It should NOT be used as security equipment for home, building, warehouse or any other places. If a user violates the product use instructions, the manufacturer will NOT be liable for any risks and property losses

Caution

Risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Do not ingest battery, Chemical Burn Hazard.
This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
The equipment is only suitable for mounting at heights ≤ 2 m

Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.

EU Declaration of Conformity

** Hereby, [Lumi United Technology Co., Ltd] declares that the radio equipment type [Wireless Mini Switch T1, WB-R02D] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the
following internet address** : https://www.aqara.com/DoC/

UK Declaration of Conformity

Hereby, [Lumi United Technology Co., Ltd] declares that the radio equipment type [Wireless Mini Switch T1, WB-R02D] is in compliance with Directive 2017 (SI 2017 No. 1206, as amended by SI 2019 No. 696). The full text of the UK declaration of conformity is available at
the following internet address: http://www.aqara.com/DoC/.

WEEE Disposal and Recycling Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health.

Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

Symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

FCC ID:2AKIT-AR001

Federal Communications Commission (FCC) compliance statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. RF Exposure statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’ s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES‐003.

This device complies with RSS‐247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.