LD systems LDRSMP Radio Streamer Media Player User Manual

: June 13, 2024
: LD Systems

Table of Contents

LD systems LDRSMP Radio Streamer Media Player
Product Usage Instructions
INFORMATION ON THIS QUICK START GUIDE
INTENDED USE
SAFETY INSTRUCTIONS
CAUTION HIGH VOLUME AUDIO PRODUCTS!
PACKAGING CONTENT
FEATURES
CONNECTIONS, CONTROLS AND INDICATORS
INFRARED REMOTE CONTROLE
CABLING EXAMPLE
TECHNICAL DATA
DISPOSAL
FCC STATEMENT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LD systems LDRSMP Radio Streamer Media Player

Product Information: Product Name: RSMP – Radio Streamer Media Player LDRSMP Manufacturer: LD Systems Website:
www.ld-systems.com

Product Usage Instructions

Read the User’s
Manual: It is important to read the User’s Manual carefully before using the RSMP. The manual contains essential information on the product’s intended use, safety instructions, explanations of terms and symbols, as well as care, maintenance, and technical data.
Intended Use: The RSMP is designed to be a reliable audio product that can be used for streaming radio and playing media files. It is intended for indoor installation.
Safety Instructions: TheUser’s Manual provides important safety instructions that must be followed to ensure safe operation of the RSMP. These instructions include information on potential hazards, such as electric shock, and how to avoid them.
Explanations of Terms and Symbols: The User’s Manual includes explanations of terms and symbols used throughout the manual. These explanations help users understand the information provided and ensure correct usage of the RSMP.
Packaging Content: Check the packaging content to ensure that all necessary components are included. The User’s Manual provides details on what should be included in the packaging.
Connections, Controls, and Indicators: The User’s Manual provides information on the various connections, controls, and indicators of the RSMP. Refer to this section to understand how to connect the device and operate its controls.
Infrared Remote Control: The RSMP comes with an infrared remote control for convenient operation. The User’s Manual provides information on how to use the remote control effectively.
Cabling Example: To assist users in setting up the RSMP, the User’s Manual includes a cabling example.
This example illustrates how to properly connect the device to other audio equipment.
Care, Maintenance, and Repair: Proper care, maintenance, and occasional repair are important to ensure the longevity and optimal performance of the RSMP. The User’s Manual provides guidelines on how to care for and maintain the device, as well as information on when and how to seek repair services if needed. 10. Technical Data: The User’s Manual includes technical data about the RSMP, such as power requirements, dimensions, and supported audio formats. This information can be useful for troubleshooting or compatibility purposes.
Disposal:
When the RSMP reaches the end of its life cycle, it is important to dispose of it properly. The User’s Manual provides information on how to dispose of the device in an environmentally friendly manner.
Please note that the above instructions are a summary of the topics covered in the User’s Manual. For detailed information and specific instructions, please refer to the User’s Manual provided with the RSMP.

YOU‘VE MADE THE RIGHT CHOICE!
We have designed this product to operate reliably over many years. LD Systems stands for this with its name and many years of experience as a manufacturer of high-quality audio products.
Please read this User‘s Manual carefully, so that you can begin making optimum use of your LD Systems product quickly. You can find more information about LD SYSTEMS at our Internet site WWW.LD-SYSTEMS.COM

INFORMATION ON THIS QUICK START GUIDE

These instructions do not replace the detailed operating instructions (www.ld- systems.com/LDRSMP-downloads).

Read the safety instructions and the entire manual carefully before using the appliance.
Observe the warnings on the appliance and in the operating instructions.
Always keep the operating instructions within reach.
If you sell or pass on the appliance, be sure to hand over these operating instructions as well, as they are an essential part of the product.

INTENDED USE

The product is a device for professional audio installation! The product has been developed for professional use in the field of audio installation and is not intended for use in households!

Furthermore, this product is intended for installation by qualified persons with specialist knowledge and for operation by instructed persons! The use of the product outside the specified technical data and operating conditions is considered as not intended! Liability for damages and third party damages to persons and property due to non-intended use is excluded! The product is not suitable for:

Persons (including children) with limited physical, sensory or mental capabilities or lack of experience and knowledge.
Children (children must be instructed not to play with the device).

EXPLANATIONS OF TERMS AND SYMBOLS

DANGER: The word DANGER, possibly in combination with a symbol, indicates an imminently hazardous situation or condition to life and limb.
WARNING: The word WARNING, possibly in combination with a symbol, indicates potentially hazardous situations or conditions which could endanger life and limb.
CAUTION: The word CAUTION, possibly in combination with a symbol, is used to indicate situations or conditions that could result in injury.
ATTENTION: The word ATTENTION, possibly in combination with a symbol, indicates situations or conditions which may lead to damage to property and/or the environment.

This symbol indicates hazards that can cause electric shock.

This symbol indicates danger points or dangerous situations.

This symbol indicates hazards due to hot surfaces.

This symbol indicates hazards due to high volumes.

This symbol indicates a device that does not contain user-replaceable parts.

This symbol indicates supplementary information on the operation of the product.

SAFETY INSTRUCTIONS

DANGER:

Do not open or modify the device.
If your device no longer functions properly, if liquids or objects have entered the inside of the device, or if the device has been damaged in any other way, switch it off immediately and disconnect it from the power supply. This device may only be repaired by authorized specialists.
For devices of protection class 1, the protective conductor must be connected correctly. Never interrupt the protective conductor. Devices of protection class 2 do not have a protective earth conductor.
Make sure that live cables are not kinked or otherwise mechanically damaged.
Never bypass the device fuse.

WARNING:

The device must not be put into operation if it shows obvious damage.
The device must only be installed in a de-energized state.
If the power cable of the device is damaged, the device must not be put into operation.
Permanently connected mains cables must only be replaced by a qualified person.

CAUTION:

Do not operate the device if it has been exposed to strong temperature fluctuations (for example, after transport). Moisture and condensate could damage the device. Do not switch on the device until it has reached ambient temperature.
Make sure that the voltage and frequency of the mains supply match the values indicated on the device. If the device has a voltage selector switch, do not connect the device until it is set correctly. Use only suitable power cords.
To completely disconnect the device from the power supply, unplug the power cable or power adapter from the outlet. It is not sufficient to press the on/off switch on the unit.
Only replace the fuse with a fuse of the same type and rating indicated on the device.
Make sure that suitable measures have been taken against overvoltage (e.g. lightning strike).
Observe the specified maximum output current on devices with Power Out connection. Ensure that the total current consumption of all connected devices does not exceed the specified value.
Replace pluggable mains cables only with original cables.

DANGER:

Choking hazard! Plastic bags and small parts must be kept out of reach of persons (including children) with reduced physical, sensory or mental capabilities.
Danger of falling down! Make sure that the device is securely installed and cannot fall down. Only use suitable stands or mountings (especially for fixed installations).
Make sure that accessories are properly installed and secured. Make sure that applicable safety regulations are observed.

WARNING:

Use the device only in the manner intended.
Operate the device only with the accessories recommended and intended by the manufacturer.
During installation, observe the safety regulations applicable in your country.
After connecting the device, check all cable routes to prevent damage or accidents, e.g. due to tripping hazards.
It is essential to observe the specified minimum distance to normally flammable materials! If this is not explicitly stated, the minimum distance is 0.3 m.

CAUTION:

In the case of moving components such as mounting brackets or other moving components, there is a possibility of getting jammed.

CAUTION:

Do not install or operate the unit near any radiators, heat registers, stoves, or other sources of heat. Always ensure that the device is installed in such a way that it is sufficiently cooled and cannot overheat.
Do not place ignition sources such as lighted candles near the unit.
Ventilation openings must not be covered and fans must not be blocked.
Use the original packaging or packaging provided by the manufacturer for transport.
Avoid shocks or impacts to the device.
Observe the IP protection class as well as the ambient conditions such as temperature and humidity according to the specification.
Devices may be subject to continuous development. In case of deviating information on operating conditions, performance or other device characteristics between operating instructions and device labeling, the information on the device always has priority.
The device is not suitable for tropical climates and for operation above 2000 m above sea level.
Unless explicitly stated, the device is not suitable for operation under marine conditions.

NOTICE:
In the case of conversion or retrofit kits or accessories provided by the manufacturer, be sure to follow the enclosed instructions.

CAUTION HIGH VOLUME AUDIO PRODUCTS!

This device is intended for professional use. Commercial operation of this device is subject to applicable national regulations and guidelines for accident prevention.
Hearing Damage from High Volume and Continuous Exposure: Use of this product may generate high sound pressure levels (SPL) that can cause hearing damage. Avoid exposure to high volume levels.
SIGNAL TRANSMISSION AND CONTROL VIA RADIO (E.G. W-DMX OR AUDIO RADIO SYSTEMS, BLUETOOTH):
The quality and performance of wireless signal transmissions is generally dependent on the environmental conditions.

Influence on the range and signal stability have e.g.:

Shielding (e.g. masonry, metal buildings, water).
High radio traffic (e.g. strong W-LAN networks)
Interference
Electromagnetic radiation (e.g. LED video walls, dimmers)
All range specifications refer to free-field application with line-of-sight contact without interference!
The operation of transmitters is subject to official regulations. These may vary from region to region and must be checked by the operator before commissioning (e.g. radio frequency and transmission power).

WARNING: Devices with wireless signal transmission are not suitable for operation in sensitive areas where radio operation can lead to possible interactions. These include:

Hospitals, health centers, or other healthcare facilities that provide patient care with specialized personnel and equipment.
Class I, II and III hazardous areas
Restricted areas
Military facilities
Aircraft or vehicles
Areas where the use of cell phones is prohibited

UNITS WITH BATTERY REPLACEMENT PROVIDED BY THE USER (E.G. REMOTE CONTROL)

DANGER:
Be sure to observe the manufacturer‘s data sheet for the batteries or rechargeable batteries used!

Batteries and rechargeable batteries must be kept out of reach of persons (including children) with reduced physical, sensory or mental capabilities.
Danger of suffocation!
Avoid strong mechanical impacts on batteries and accumulators! Damage due to falling, smashing or puncturing as well as high pressure leads to fire and explosion hazards as well as the risk of further dangerous situations (e.g. outgassing).
Leaking battery fluid is corrosive and can be toxic. It can cause skin and eye irritation and is dangerous if swallowed. Avoid any contact with leaked fluid.
In case of contact with leaked liquid, wash the affected area immediately with plenty of water and contact a doctor.
Never attempt to charge non-rechargeable batteries. Danger of explosion!
Do not throw batteries and rechargeable batteries into a fire! Danger of explosion!
Do not short-circuit batteries and rechargeable batteries! Avoid contact of the battery terminals with electrically conductive objects (e.g. key ring or coins).

ATTENTION:

When inserting batteries and rechargeable batteries, ensure that the polarity is correct (see illustrations in the battery compartment or on the housing).
Do not use different cell types and battery brands in the same unit at the same time.
Only use batteries and rechargeable batteries with the same discharge status.
Check batteries and rechargeable batteries for damage and do not use damaged batteries and rechargeable batteries!

OTES FOR INDOOR INSTALLATION EQUIPMENT

Units for installation applications are designed for continuous operation.
Units for indoor installation are not weatherproof.
Surfaces and plastic parts of installation equipment can also age, e.g. due to UV radiation and temperature fluctuations.
This does not usually lead to functional restrictions.
with permanently installed units, the deposition of impurities, e.g. dust, is to be expected. Be sure to observe the care instructions.
Unless explicitly stated otherwise on the unit, the units are intended for installation heights of less than 5 m.

PACKAGING CONTENT

Remove the product from the packaging and remove all packaging material. Check that all items are present and notify your distributor immediately after purchase if there are any missing or damaged items. RSMP packaging includes the following items:

RSMP Radio Streamer Media Player
IR remote control
DAB+ / FM antenna
WiFi antenna
External power supply unit with interchangeable plugs
1 set of terminal blocks
Mounting set for under-table mounting
Quick start guide

FEATURES

This guide describes how to use the RSMP Radio Streamer and Media Player, an advanced but easy-to-use Wi-Fi, and ethernet connected audio system with the following modes:

DAB/DAB+/FM broadcast radio covering local digital and analogue radio stations
Internet Radio with access to over 20,000 stations, ‚Listen again‘ broadcasts
Podcasts with access to global podcasts
Audio streaming acting as audio receiver for streaming services, control via the front panel user interface, Frontier Smart Technologies‘ UNDOK App or the relevant services app: Amazon Music
Spotify acting as audio receiver controlled by the Spotify App available for i0S/Android smart devices and a desktop client for PCs
Bluetooth – streaming and control from a Bluetooth Smart device
Music Player – allows easy navigation and playback of MP3 music files from a USB stick

RSMP includes also these features:

Mute circuit in line output to avoid pop noise during Power ON or OFF
Infrared remote control
Remote control via Frontier Smart Technologies‘ UNOOK App, available in iOS and Android OS.

Fraunhofer: MPEG-4 HE AAC Audio decoder MPEG-4 HE-AAC audio coding technology licensed by Fraunhofer IIS. http://www.iis.fraunhofer.de/amm/
The Spotify Software is subject to third party licenses found here: https://www.spotify.com/connect/third-party-licenses Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how.

CONNECTIONS, CONTROLS AND INDICATORS

POWER IN
Terminal block connection for the power supply of the unit. To avoid damage to the unit, please use only the original power supply unit (power supply unit included in the packaging content).
CABLE STRAIN RELIEF
Use the strain relief for the flexible cable of the external power supply, to protect the terminal block connection from damage and to prevent the terminal block from being pulled out unintentionally.
LINE OUT L / R
Analogue audio outputs with balanced terminal block connections. Poles +, – and G are intended for the balanced output signal (suitable for unbalanced cabling). Terminal block connectors are included in the packaging.
ANTENNA WIFI
Antenna connection for a WiFi antenna (antenna included). The internal WiFi module enables wireless connection to a wireless network for remote control, internet radio and streaming services.
ETHERNET
Ethernet connection for wired connection to a network for remote control, internet radio and streaming services.
USB
USB-A socket for connecting a USB storage medium. MP3 audio files stored in a USB stick can be played in Music Player mode
ANTENNA FM /DAB
Connection for an FM or DAB radio antenna (antenna included in the packaging). The internal radio module enables analogue and digital radio reception (FM, DAB / DAB+).
BUTTON STANDBY / ON
With this button, RSMP is put into standby mode or turned on.
The illuminated power symbol indicates the unit status.
Symbol flashes white: Start-up process
Symbol lights up permanently white: Ready for operation
Symbol flashes red: System is turning into standby mode
Symbol lights up permanently red: Standby mode
INFRARED SENSOR
Infrared sensor for control via IR remote control.
VOLUME / PUSH TO SELECT
Rotary-push encoder for adjusting the volume and navigating in the unit menu. In menu navigation mode, turn clockwise or anticlockwise to scroll down or up through a menu, list of items or station list. The current item is highlighted in reverse text (dark characters on a light background).
Press to select the highlighted item.
GRAPHIC DISPLAY
Multifunctional graphic LC display with illumination.
PRESET
Short press for Preset recall menu/ Long press for Preset Save menu; Scroll up/down with the rotary VOLUME encoder to select the preset number, and then push it to confirm. There are 40 presets each for, Internet radio/Podcasts (combined), DAB and FM modes, up to 10 presets for
Spotify, and 8 presets for Amazon Music.
INFO
View more information about the station or track playing. Press again to cycle through further information screens then return to the normal Now playing screen.
MENU/BACK
Press this button to show the menu for the current mode (Internet radio, FM, etc.) Now navigate
to the desired menu item by turning the rotary-push encoder and press the encoder to select the
highlighted item. Press MENU/BACK again to go up one level in the menu structure or press and
hold for 2 seconds, to get to the main display.
PLAYER CONTROL
Start / Pause
Next: press to select next track or press and hold to scan up (Radio)/ fast forward.
Previous: press to select start of track, previous track, or press and hold to scan down (Radio)/ rewind.

VENTILATION OPENINGS
To prevent damage to the unit, do not cover the ventilation openings on the left and right side, and the top and bottom. And ensure that air can circulate freely.

INFRARED REMOTE CONTROLE

CABLING EXAMPLE

CARE, MAINTENANCE AND REPAIR
To ensure the proper functioning of the device in the long term, it must be cared for regularly and serviced as required. The care and maintenance requirements depend on the intensity of use and environment.
We generally recommend a visual inspection before each start-up. Furthermore, we recommend carrying out all the maintenance measures listed below every 500 operating hours or, in the case of less intensive use, after one year at the latest. Defects due to insufficient care may result in limitations of the warranty claims.

MAINTENANCE (user performable)

WARNING! Prior to any maintenance measures, the voltage supply and, if possible, all device connections must be disconnected.

NOTE! Improper maintenance may impair the device or even destroy it.

Housing surfaces must be cleaned with a clean, damp cloth. Make sure that no moisture can penetrate the device.

Air inlets and outlets must be regularly cleaned of dust and dirt. If compressed air is used, care must be taken to prevent damage to the unit (e.g. fans must be blocked for this case).
Cables and plug contacts must be cleaned regularly and freed from dust and dirt.
In general, no cleaning agents, disinfectants or agents with an abrasive effect may be used for maintenance, otherwise the surface finish may be impaired. Especially solvents, such as alcohol, can impair the function of the housing seals.
Devices must generally be stored in a dry place and protected from dust and dirt.

MAINTENANCE AND REPAIR (by qualified personnel only)

DANGER! There are live components in the device. Even after disconnection from the mains, residual voltage may still be present in the device, e.g. due to charged capacitors.

NOTE! There are no assemblies in the device that require maintenance by the user.

Maintenance and repair work may only be carried out by qualified personnel authorized by the manufacturer. In case of doubt, contact the manufacturer.
Improperly performed maintenance work may affect the warranty claim.

TECHNICAL DATA

DISPOSAL

PACKAGING:

Packaging can be disposed of via the usual waste disposal channels.
Please separate the packaging according to the waste disposal and materials regulations in your country.

DEVICE:

This device is subject to the European Directive on Waste Electrical and Electronic
Equipment in its applicable version. WEEE Directive- Waste Electrical and Electronical
Equipment. Old devices and batteries do not belong in household waste. The old device or batteries must be disposed of via an approved waste disposal service or a municipal waste disposal facility. Follow the directives in your country!
Follow the disposal laws in your country.
As a private customer, you can obtain information on environmentally friendly disposal options from the retailer from whom you purchased the product or from the relevant regional authorities.

BATTERIES AND RECHARGEABLE BATTERIES:

Batteries and rechargeable batteries do not belong in household waste. Batteries and rechargeable batteries must be disposed of via an authorised disposal company or a municipal disposal facility.
Observe all disposal laws and regulations applicable in your country.
As a private customer, you can obtain information on environmentally friendly disposal options from the dealer from whom the product was purchased or from the relevant regional authorities.
Appliances with batteries or accumulators that cannot be removed by the user must be handed in at a collection point for electrical appliances.

MANUFACTURER´S DECLARATIONS
MANUFACTURER‘S WARRANTY & LIMITATIONS OF LIABILITY
Adam Hall GmbH, Adam-Hall-Str. 1, D-61267 Neu Anspach / E-mail Info@adamhall.com /+49 (0)6081 / 9419-0. Our current warranty conditions and limitation of liability can be found at: https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS- DECLARATIONS_LD_SYSTEMS.pdf
Contact your sales partner for service.

UKCA-CONFORMITY
Hereby, Adam Hall Ltd. declares that this product meets the following guidelines (where applicable)
Electrical Equipment (Safety) Regulations 2016
Electromagnetic Compatibility Regulations 2016 (SI 2016/1091)
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment

Regulation 2012 (SI 2012/3032)
Radio Equipment Regulations 201 7(SI 2016/2015)

UKCA-DECLARATION OF CONFORMITY
Products that are subject to Electrical Equipment(Safety)Regulation 2016,
EMC Regulation 2016 or RoHS Regulation can be requested at info@adamhall.com.
Products that are subject to the Radio Equipments Regulations 2017 (SI2017/1206) can be downloaded from www.adamhall.com/compliance/

CE CONFORMITY
Adam Hall GmbH hereby confirm that this product meets the following guidelines (where applicable):
R&TTE (1999/5/EC) or RED (2014/53/EU) as of June 2017.
Low Voltage Directive (2014/35/EU)
EMC Directive (2014/30/EU)
RoHS (2011/65/EU)
The complete Declaration of Conformity can be found at www.adamhall.com.
Furthermore, you can also request it at info@adamhall.com.

CE DECLARATION OF CONFORMITY
Declarations of conformity for products subject to the LVD, EMC, RoHS Directive can be requested from info@adamhall.com.
Declarations of conformity for products subject to RED Directive can be downloaded from www.adamhall.com/compliance/.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

SUBJECT TO MISPRINTS AND ERRORS, AS WELL AS TECHNICAL OR OTHER MODIFICATIONS!