EXOTRONIC B2 Pre Wired Victron Board User Manual
- June 13, 2024
- Exotronic
Table of Contents
EXOTRONIC B2 Pre-Wired Victron Board
Mains Charger
Capable of mains charging at up to 120A.
Solar Charging
Capable of charging up to 50A. Recommended solar capacity 600 – 800W.
DC-DC Charging
30A charge rate and compatible with smart alternators and configurable via
Bluetooth.
Combined Charging
The combined charge rate is 200A. The charge rate can be limited through the
Cerbo GX.
240V Inverter
3000VA / 16A transfer switch with 5500W surge capacity
Warning
To maximize the longevity and safety of your new Victron Pre-Wired Board,
please ensure you follow stay within the specified parameters and connect to
the appropriate terminals referring to the wiring diagram. Failure to do so
could result in shortened lifespan and void your warranty. This equipment
contains 240V equipment – serious injury and/or death can occur when working
with these voltages. Only competent/licensed persons must connect to the 240V
supply.
Risk of fire/explosion – do not short-circuit the equipment or exceed voltages. Always check polarity before powering equipment on. Do not expose to the weather or allow water ingress. Keep out of excess dust and do not exceed temperature ratings. Always select appropriate fuse sizes and ensure suitably tight connections.
Specifications
| Board Input Voltage | 11.2 – 17V |
|---|---|
| Minimum Battery Capacity and Current | 250Ah |
250A Continuous Current
Inverter Constant Output Power @ 25C| 3000VA / 2400W
Inverter Constant Output Power @ 40C| 2200W
Inverter Peak Power| 5500W
Inverter Maximum Efficiency| 93%
Board Zero Load Power (Inverter On)| 20W
Board AC Input Voltage Range| 187 – 265VAC 45- 65Hz
Maximum Charge Current – Mains| 120A
Maximum Charge Current – Solar| 50A
Maximum Charge Current – DC-DC| 30A
Maximum Total Charge Current| 200A
DC-DC Maximum Efficiency| 87%
Output Absorption Voltage| 14.2V – Adjustable
Output Float Voltage| 13.5V – Adjustable
Battery Protect Trip Voltage| 11.5V for 30s – Adjustable
Solar Maximum Voltage| 100V
Solar Array Size| 0 – 1200W
(600-800W recommended)
Solar Maximum Short Circuit Current| 60A
Solar Maximum Efficiency| 98%
Board Temperature Rating| 5C – 45C
(0C – 65C storage)
Board A2 Dimensions| 780 x 530 x 170mm
Board B2 Dimensions| 1200 x 355 x 170mm
Board Weight| 33kg
- More details available on individual component data sheets if needed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>