NETGEAR FS726T ProSafe 24-port 10/100 Smart Switch Installation Guide

NETGEAR FS726T ProSafe 24-port 10/100 Smart Switch

Start Here

Follow these instructions to set up your smart switch.

Prepare to Install Your Smart Switch

• Prepare a PC with an Ethernet adapter and a CD ROM drive.
• Before proceeding with the smart switch installation, familiarize yourself with the contents of the Resource CD, especially the manuals.

First, Install the Smartwizard Discovery Utility on a PC

1. Power on your PC, let the operating system boot up completely, and log in as needed.

2. Insert the Resource CD for the Smart Switch Series into your CD-ROM drive. The CD main page shown below will load.

3. Click Install SmartWizard. Follow the prompts to complete the installation of the SmartWizard GearDiscovery utility.

4. Click OK when done.

Next, Connect Your Smart Switch in the Correct Order

Note: These instructions assume you are using DHCP in your network. If you are using static IP addressing in your network, configure the switch IP address before connecting it to your network. In the absence of a DHCP server, the switch will default to 192.168.0.239 for its IP address. To configure the switch before connecting it to your network, set up the PC with an IP address of 192.168.0.x subnet, and connect the PC to the switch. Then, use the Smartwizard Discovery utility as illustrated below to configure the switch.

1. Connect the smart switch to your network.
   

2. Power on the switch.

3. Verify that the PC with the SmartWizard GearDiscovery utility is on the same subnet as the switch.
   

Now, Configure the Switch with the SmartWizard Discovery Utility

1. Double-click the SmartWizard GearDiscovery icon on your desktop or in the Windows Start menu Programs to run the utility and view this screen.
   

2. Click Discover to find your switch in the network.
   The SmartWizard GearDiscovery utility finds the switch and displays its MAC Address, IP Address, and model number. If you cannot configure your switch, verify that the cable connections are secure, and that the IP address configuration of the PC is in the same subnet as the switch, and click the Discover button.

3. Click to select the line displaying the details of your switch. If there are multiple smart switches in your network, be sure to select the one you want to configure.

4. Click Web Access to view the switch log-in screen.

5. Enter the default password of password in lowercase letters and click Login. The switch will display the switch settings main page. Configure the switch for your network. Consult the manual on the CD or the online help in the switch for assistance with configuration procedures.

After you log in to the switch, the main Web Access menu displays.

Use the configuration menu options to configure your switch.

Power Over Ethernet Option

If your switch includes the Power over Ethernet option, such as the FS726TP, you can use it to power Ethernet devices like VoIP desk phones or suitably equipped wireless access points. Simply plug a Cat5 or better cable into the port and the switch will determine if it is safe to provide power along with the data. See the hardware guide for more details.

Troubleshooting Tips

Here are some tips for correcting simple problems you may have.

• Be sure to power on your PC and smart switch in the correct sequence.
  Follow this sequence. Turn off the smart switch and computer. First, turn on the smart switch and wait two minutes. Next turn on the computer.

• Make sure the Ethernet cables are securely plugged in.
  For each powered-on computer connected to the smart switch with a securely plugged-in Ethernet cable, the corresponding smart switch LAN port status light will be lit.

• Make sure the network settings of the computer are correct.
  In most cases, computers should be configured to obtain an IP address automatically via DHCP. For help with this, please see the animated tutorials on the CD or the Reference Manual Appendix C on the CD. If your network uses static IP addresses, be sure the switch and computer are configured with valid IP addresses.

Technical Support

Thank you for selecting NETGEAR products.

Register Your Product
To register, go to: http://www.NETGEAR.com/register
Go to http://www.NETGEAR.com/support for support information.

Trademark

© 2005 by NETGEAR, Inc. All rights reserved. NETGEAR is a registered trademark of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.

FAQ’s

What is the NETGEAR FS726T ProSafe Smart Switch used for?

The NETGEAR FS726T ProSafe Smart Switch, which provides cutting-edge capabilities for small to medium-sized enterprises, is used to increase and control network connectivity.

How many ports does the FS726T ProSafe Smart Switch have?

Each of the 24 ports on the FS726T ProSafe Smart Switch can handle data speeds of 10/100 Mbps.

Does this switch support Gigabit Ethernet (1000 Mbps) speeds?

No, the FS726T ProSafe Smart Switch only supports Gigabit Ethernet and only supports 10/100 Mbps speeds.

Is the switch manageable?

The FS726T ProSafe Smart Switch, which offers sophisticated management and configuration options, is a managed switch.

What management features does the switch offer?

For network optimization and monitoring, the switch offers capabilities including support for VLANs, QoS (Quality of Service), and port mirroring.

Can I use this switch for VoIP (Voice over IP) applications?

The FS726T ProSafe Smart Switch prioritizes voice traffic using QoS settings, hence it does enable VoIP deployments.

Is the switch rack-mountable?

The FS726T ProSafe Smart Switch can be installed in a data center or equipment room because it is rack-mountable.

Does the switch support link aggregation (port trunking)?

Link aggregation is not supported by the FS726T ProSafe Smart Switch, unfortunately.

Can I set up VLANs on this switch?

The switch does indeed allow VLANs (Virtual LANs) for network security and segmentation.

Is there a web-based interface for configuration?

Yes, a web-based interface may be used to configure the switch, making setup and management simple.

Does the switch support loop detection and prevention?

In order to prevent network loops, the FS726T ProSafe Smart Switch normally has loop detection and prevention capabilities.

What is the warranty period for the FS726T ProSafe Smart Switch?

The switch warranty period may change. For particular warranty information, it is advised to consult the product documentation or get in touch with NETGEAR customer care.

References:NETGEAR FS726T ProSafe 24-port 10/100 Smart Switch – Device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>