BRISTAN MZ SNK EF BLK Monza Easyfit Dual Lever Kitchen Mixer Tap Instruction Manual
- June 13, 2024
- BRISTAN
Table of Contents
- BRISTAN MZ SNK EF BLK Monza Easyfit Dual Lever Kitchen Mixer Tap
- Product Information
- Product Usage Instructions
- Specifications
- Pack Contents
- Prior to Installation
- Installation
- General Cleaning
- Alternative Installation
- Maintenance – Cleaning
- Troubleshooting
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BRISTAN MZ SNK EF BLK Monza Easyfit Dual Lever Kitchen Mixer Tap
Product Information
- Product Code: MZ SNK EF BLK (D1)
- Inlet Water Temperature: Cold Water Supply, Hot Water Supply
- Inlet Connections: 1/2 BSP Flexible Tails with Isolation Valves
- Dynamic Water Pressure: Min: 0.3 bar, Max: 5.0 bar
- Maximum Static Pressure: 10.0 bar
- Tools You’ll Need:
- Adjustable Spanner
- EasyFit Tool
- Hexagonal Key
- Crosshead Screwdriver
Product Usage Instructions
- We recommend servicing your tap at least once every year to prolong its life. To see a video showing how to remove the cartridge for servicing, scan the QR code with your smart phone or tablet. Alternatively, visit www.youtube.com/BristanTV.
- Prior to Installation:
- All products manufactured and supplied by Bristan are safe provided they are installed, used correctly, and receive regular maintenance in accordance with these instructions.
- This product has been tested to the Water Regulations Advisory Scheme (WRAS) and satisfies the requirements of the Water Supply (Water Fittings) Regulations 1999 and current bylaws.
- Isolation valves must be fitted to the inlet water supplies to ensure ease of future maintenance.
- Before installing these taps, the water supply must be thoroughly flushed to remove any swarf, solder, etc.
- This product must not be modified in any way as this will invalidate the guarantee.
- Installation:
- Feed the base through the sink hole from the top. If the surface the tap is being fitted to is over 8mm or you feel the tap needs extra stability, follow the alternative installation steps.
- Turn the hexagonal key clockwise until the base is secured.
- Screw the flexible tails into the base. DO NOT OVER-TIGHTEN.
- Drop the Plain Inlet Connector into the base. Connect the hot and cold water connections.
- Grease the O-Rings using the Molykote Grease provided.
- Place your desired tap onto the base. Secure in place with the grub screws using the tool provided.
- Thread the hexagonal key through the EasyFit tool and tighten the grub screws with an extra 1/2 turn.
- Your tap is now ready to use.
Specifications
Pack Contents
Tools You’ll Need
Spare Parts
To replace any spare parts for your tap, why not scan the QR Code or visit
www.bristan.com and search for your product.
Servicing Your Tap
We recommend servicing your tap at least once every year to prolong its life. To see a video showing how to remove the cartridge for servicing, scan the QR code with your smart phone or tablet. Alternatively visit www.youtube.com/BristanTV
Prior to Installation
All products manufactured and supplied by Bristan are safe provided they are
installed, used correctly and receive regular maintenance in accordance with
these instructions. This product has been tested to the Water Regulations
Advisory Scheme (WRAS) and satisfies the requirements of the Water Supply
(Water Fittings) Regulations 1999 and current bylaws.
For full Installation Requirements & Notes (IRN) please visit
wras.co.uk/directory.
Isolation valves must be fitted to the inlet water supplies to ensure ease of
future maintenance. Before installing these taps the water supply must be
thoroughly flushed in order to remove any swarf, solder etc. This product must
not be modified in any way as this will invalidate the guarantee.
Flexible Connecting Pipes
Installation
General Cleaning
- Bristan products are made from premium materials, with hand polishing and electroplated finishes.
- Your taps or shower should be regularly cleaned with warm water, a mild pH-neutral liquid soap, and polished with a soft cloth. Any residues from soap, toiletries etc. should be rinsed off straight after use.
- Household bleaches and cleaners contain harsh chemicals and may damage the surface finish. Avoid using abrasive cloths, scouring pads, scrub sponges, steel wool or anything similar.
- Some surfaces such as nickel and pewter may be affected by the dye found in some cloths, so it is also important to avoid hanging cloths on spouts.
Operation
Alternative Installation
Alternative Installation for Surfaces Out of Tolerance/Extra Stability
Maintenance – Cleaning
Replacing Outlet
Replacing Cartridge
Troubleshooting
Refer to the Maintenance section or visit www.youtube.com/BristanTV to watch the procedure.
At Bristan, we want to make things as easy as possible for our customers.
That’s why we offer solid guarantees on all our products, effective from the
date of purchase, to give you peace of mind. To start your free guarantee
simply scan the QR code and register your product. Alternatively visit
www.bristan.com/register.
For any other queries, please call our Customer Service on 0330 026 6273 where
our expert team of advisors will be able to offer you any help and advice. For
full guarantee terms and conditions visit www.bristan.com/service-
centre/guarantees.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>