ZEBRA EC50 Enterprise Mobile Computer User Manual

June 13, 2024
ZEBRA

ZEBRA EC50 Enterprise Mobile Computer

Technical Accessory Guides (TAGs)

For Associates, Resellers, ISVs and Alliance Partners Global

Version: Active-Only
Will only show products that are known to be available for sale

Note: This document is only for genera/ reference. Solutions Pathway and related PMBs should be used for product availability, pricing, and final solution selection.
Zebra does not endorse or specifically recommend any third-party ø0dJCts, accessories, Or hardware. ZEBRA DISCLAIMS ANY AND ALL LIABILITY, INCLUDING ANY EXPRESS OR IMPLIED WARRANTIES, WHETHER ORAL OR FOR SUCH THIRD PARTY PRODUCTS, ACCESSORIES, OR HARDWARE THE CUSTOMER ACKNOWLEDGES THAT NO REPRESENTATION HAS BEEN MADE EY ZEERA AS TO Fl TNESS OF THE THIRDPARTY PRODUCTS, ACCESSORIES, OR HARDWARE FOR CUSTOMER’S INTENDED PURPOSE.

Cradles and Charging

Single Device Cradles

Part Number| Picture| Description| Notes| Required Items
CRD-EC5X-1SCU-01|

| Single Slot USS/Charging Kit

| ► Will charge EC5X from 0-24% in around 15 min. and 0-90% in less than 2 hours.

►Supports USB 3.0

► Compatible with EC5X units with hand strap, Rugged Boot or Trigger Handle attached.

►Includes cradle insert/shimthat

requires removal when using a EC5X unit with the Rugged Boot or Trigger Handle attached.

►Connects to USB-C and pogo pin charge contacts on bottom of device.

►Kit includes Single Slot Cradle (CRD­

EC5X-1 SCU-02), Power Supply (PWR­ BGA12V50W0WW) and DC Line Cord (CBL-DC-388A 1-01)

►Does not use Zebra ShareCradle design.

| ►  AC Line Cord (23844-00-00F or country-specific version)

for communication to PC

►  USB-C to USB-A cable (CBL­ TC5X-USBC2A-01)

CRD-EC5X-1 SCUE-01|

| Single Slot

USS/Ethe rnet /Charging Cradle Kit

| ► Will charge EC5X from 0-24% in around 15 min. and 0-90% in less than 2 hours.

►Supports USB 3.0

►Compatible with EC5X units with than strap, Rugged Boot or Trigger Handle attached.

►Includes  cradle insert/shimthat

requires removal when using a EC5X unit with the  Rugged Boot or Trigger Handle attached.

►Connects to USB-C and pogo pin charge contacts on bottom of device.

►10/100 Mbps Ethernet speed

►Kit includes Ethernet  Cradle (CRD­ EC5X-1SCUE-02), Power Supply  (PWR­

BGA12V50W0WW) and DC Line Cord (CBL-DC-388A 1-01).

►Does not use Zebra ShareCradle

design.

|

d

►  AC Line Cord (23844-00-00F or country specific version)

for communication to PC

►  USB-C to USB-A cable (CBL TC5X-USBC2A-01)

CRD-EC5X-1 SWS-01| | Workstation Docking Cradle Kit| ►  An enhanced single-slot charging cradle

allowing users to use the EC5X as a

workstation or kiosk.

►Cradle includes the following additional

ports:

-HDMI

– Ethernet

– 4 USB ports for keyboard, mouse , and other supported USB devices.

►Two USB ports are located on both sides

of cradle. One port provides 1.5A current.

The remaining three pro v ide .SA current.

►                   Also includes Kensington port to secure

the cradle to a desk location. Cradle can

also be screwed down to desk/counter.

► Will charge EC5X from 0-24% in around 15

min. and 0-90 % in less than 2 hours.

► Compatible with EC5X units with hand strap, Rugged Boot or Trigger Handle attached.

Includ es cradle insert/shim that requires

rerroval \’\/hen using a ECSX unit vVith the

Rugged Boot or Trigger Handle attached.

► Connects to USB-C and pogo pin charge

contacts on bottom of device .

►Kit includes Docking Cradle (CRD-EC5X-

1SWS-02), Power Supply (PWR- BGA12V50W0WW) and 0C Line Cord (CBL­ DC- 388A1-01).

|

►  AC Line Cord (23844-00-00F

or country specific version)

---|---|---|---|---
Multi-Device Cradles
Part Number| Picture| Description| Notes| Required Items
CRD-ECSX-4S CO-01| | 4-Slot Charge-Only Cradle KIT| ►Charges          up to four EC5X units.

►Will charge EC5X from 0-24% in

around 15 min. and 0-90% in less than

2 hours.

►Compa        tible with EC5X units with hand

strap, Rugged Boot or Trigger Handle

(see limitations below) attached.

►                  Includes cradle insert/shim that

requires removal when using a EC5X unit with the Rugged Boot or Trigger

Handle attached.

►Connec   ts to pogo pin charge contact►

►on   bottom of device.    Handle attached Devices with Trigger must use far right cradle slot position. Trigger Handle must be removed to use other cradle slots.

►Kit includes Cradle (CRD-EC5X-4SCO 02), Power Supply (PWR- BGA12V108W0WW) and DC Line Cord

(CBL-DC-381A1-01).

►Does not use Zebra ShareCradle design, but can be mounted on network rack bracket (BRKT-SCRD­ SMRK-01 ).

|

i   AC   Line Cord(  23844                    F

00 00

or country specific version)

CRD-EC5X-4SCOL-01| | 4-Slot Charge-Only LOCKING Cradle KIT| ►Cradle secures devices to prevent unauthorized removal. Unlocking of device from cradle is controlled by the device. Colored green LED light around cradle slot indicates when

device is unlocked.

►Charges up to four EC5X units.

►Will charge EC5X from 0-24% in around 15 min. and 0-90% in less than 2 hours.

►Compatible with EC5X units with than strap, Rugged Boot or Trigger Handle

(see limitations below) attached.

►  Includes cradle  insert/shim that requires removal when using a EC5X unit with the Rugged Boot or Trigger

Handle attached.

►Connects to pogo pin charge contact on bottom of device.

►Devices with Trigger Handle attached must use top two cradle positions. Can be inserted into two bottom row

positions.

►Kit includes Locking Cradle (CRD­ EC5X-4SCOL-02), Power Supply (PWR ­

BGA12V10SW0WW) and DC Line Cord (CBL-DC-381 A1-01).

►Does not use Zebra ShareCradle design.

|

d

►  AC Line Cord (23844-00-00F or country specific version)

---|---|---|---|---

CRD-EC5X-SE5ET-01

|

|

5-Slot Ethernet/Charging ShareCradle KIT

| ►  Allows net work speeds up to 1 Gb

► Connects to USB-C connector and 2-

pin charge contacts on bottom of

EC5X.

► Will charge up to five EC5X units.

► Will charge EC5X from 0-24% in

around 15 min. and 0-90% in less than

2 hours.

►Does not charge spare batteries

►Compat1b_ le with EC5X units with hand strap or Tngger Handle attached.

►Kit includes Ethernet Cradle (CRD­

EC5X-SE5ET-02), Power Supply (PWR-

BGA12V10SW0WW) and DC Line Cord (CBL-DC-382A 1-01).

►Can be racked/ mounted in a

standard 19 inch rack system via the mounting accessory (BRKT-SCRD­ SMRK-01 ).

|

►     AC Line Cord(  239   44  .00- 00F

or count s ecific version)

ry P

BRKT-SCRD-SMRK-01| | 5-Slot ShareCradle Mounting Bracket| ►  Allows for rack and wall mounting of one 5-Slot Ethernet/Charging ShareCradle (CRD-EC5X- SE5ET-01) or up to two 4-Slot Charge-Only Cradles

(CRD-EC5X-4SCO-01).

► Bracket can be mounted on standard 19″ network rack or on a wall.

► Has cable routing slots and removable power supply tray that stores and conceals power supplies.

►  Ad justabletabs & screw mounts for easy hanging /installation.

► See the Bluetooth-Generic

Accessories TAG for info on 3rd party Network Racks that can be used for mounting this bracket.

|

Direct to Device Charging

Part Number| Picture| Description| Notes| Required Items
---|---|---|---|---
CBL-TC5X-USBC2A-01

or

CBL-TC2Y-USBCgQA-01

| | USS-A to USB-C cable| ►USS-A to USB-C cable

► Attaches to USB-C port on bottom of EC5X

►Cable length is 1M (~3.25 ft.)

►CBL-TC2  Y-USBCgoA-01 features

USB-A connector with a go0     bend allowing cable to be used in tighter locations. Cable length is about 1.1M (45″).

|

Communication Cables

Part Number| Picture| Description| Notes| Required Items
---|---|---|---|---
CBL-TC5X-USBC2A-01

or

CBL-TC2Y-USBCgQA-01

| | USS-A to USB-C cable|

►USB-A to USB-C cable

► Atta ches to USB-C port on bottom of

EC5X or to Single Slot Communication

Cradles.

►Cable        length is 1M (~3.25 ft.)

►CBL-TC2          Y-USBCg QA-01 features

USB-A connector with a go0     bend allowing cable to be used in tighter locations. Cable length is about 1.1M (45″).

|
3rd pa rty ·| | USB-A to USB-C cable| ►  Attaches to USB-C port on bottom of EC5X or to Single Slot Communication

Cradles.

|

Snap-On Accessories

Part Number| Picture| Description| Notes| Required Items
---|---|---|---|---
TRG-EC5X-SNP1-01| | Trigger Handle| ►Uses electrical trigger via contacts on back side of EC5X.

►Trigger Handle accessory offers

customers the option of using the product in a gun form factor , ideal for scan-intensive situations.

► Compa                  tible with standard or extended capacity battery.

►NOT compatible with Rugged Boot or

Hand Strap.

ptional Wrist Strap (SG-PD40-WLD1 –

  1. also available.

►  Allows use of rear facing camera.

| ► EC5X must be ordered with ; pin  or 8-pin 1/ 0  connector option.
KIT-EC5X-HOLSTRl-01| | Trigger Handle KIT| ► Kit includes:

– Trigger Handle (TRG-EC5X-SNP1-01)

– Soft Holster (SG-EC5X-HLSTR1-01)

| ►  EC5X must be ordered with ; pin  or 8-pin 1/ 0  connector option.
ADP-RFD40-EC5X-1E

See RFD40 Accessories Document for additional Info

| | eConnex™ Adapter for RFD40|

►  Allo ws EC50/EC55 to be mounted on top of RFD40 and communicate directly to the reader.

► Requires EC50/EC55 configuration with 8-Pin Connector Back 1/0 connector.

► Compatible with devices using Standard or Extended Capacity batteries.

►  Adapter also allows both the RFD40 and EC50/EC55 to  be  docked  as a pair in RFD40 series Single or Multi-Slot ShareCradles. Not compatible with EC5X cradles shown above in this document – see RFD40 TAG  for cradles.

|
---|---|---|---|---
ADP-RFD40-EC5X-1R

See RFD40 Accessories Document for additional Info

| | Bluetooth Sled Adapter for RFD40

|

►  Allows EC5X series devices to be mounted on top of RFD40 and communicate via Bluetooth to the reader.

►  Adapter also allows both the RFD40 and EC5X to be docked as a pair in RFD40 series Single or Multi-Slot ShareCradles. Not compatible with EC5X cradles shown above in this document – see RFD40 TAG for cradles

► Compatible with devices using Standard or Extended Capacity batteries.

► Requires Premium or Premium Plus version of RFD40 (supports Bluetooth communication)

|

Soft Goods – Cases/Holsters

Part Number| Picture| Description| Notes| Required Items
---|---|---|---|---
SG-EC5X-HLSTR1-01| | Soft Holster| ►  Vertical (portrait) orientation with Oper Bucket design to accommodate base EC5X, unit with optional Rugged Boot

or optional Trigger Handle.

► Compatible with standard or extended capacity battery.

.Strap on rear of holster allows adjustment for use w h the accessory options mentioned above. eather material.

► Non rotating for maximum durability.

► Device should be inserted into holster with speaker up and display in to allow for PTT operations.

|
KIT-EC5X-CONBNDL-01| | Protection KIT wijh Bonus Spare Battery| ► Kit includes:

– Soft Holster

(SG-EC5X-HLSTR1-01)

Screen Protector

(SG-EC5X-SCRNPT1-01)

– Spare Extended Capacity Battery (BTRY-EC5X-EX1-01)

|
---|---|---|---|---
SG-EC5X-BOOT1 -01| | Protective Boot| ►Boot increases drop spec of device:

– without boot: 4 ft. to plywood over concrete (MIL-STD-81 0G)

– with boot: 5 ft. to concrete over entire operating temperature

►Boot increases tumble spec of device

– without boot: 300 .5 meter tumbles

– with boot: 500 .5 meter tumbles

►Compatible with standard or extended capacity battery.

|
RAM-GDS-SKIN-ZE16-NG

(3rd party)·

| | RAM lntelliSkin® Next Gen Case/Boot

| ► Protective sleeve features GDS ® Technology™ and combines a hard plastic shell with soft, shock-absorbing rubber v,th

additional cutout for the scanner; designed

specifically for Zebra EC50 & EC55

G OS ® **connecto r ****an d dockin g contacts**

provide charging and data sync capabilities across the GOS ® Ecosystem platform ; Zebra ECSx devices follow USB 3.1

charging specifications

Accommodates standard and extended

battery packs as well as the Zebra hand strap (SG-ECSX-HSTRP1-01)

| ► Typically used v,th additional RAM GOS accessories (i.e. docking cradles , vehicle cradles , etc.)
https://www.rammount.com

ZEBRA-EC50-Enterprise-Mobile-Computer-fig \(68\) ZEBRA-EC50-Enterprise-Mobile-Computer-fig \(69\)

Vehicle Cradles and Holders

Powered Cradles and Holders (provides device charging and/or communication)

Part Number| Picture| Description| Notes| Required Items
various SKUs (3rd party) •| | ProClip Charging Vehicle Cradle solutions


| ►  Available in both hard-wired and cigarette lighter adapter cable

configurations.

►  Versions available to support charger via USB-C connector or via

charging POGO pins on device.

►  Versions available for devices with and without Rugged Boot installed.

► Durable cradle design for rugged enterprise use.

► Cradle provided 15 degree angle in any direction.

►  Allows for portrait and landscape view.

►  AMPS hole pattern for simple wall,pedestal or vehicle dashboard mounting.

|
---|---|---|---|---


http://www.proclipusa.com/catego ry/zebra

various (3rd party) ·| | RAM Vehicle Docks| ► Spring-loaded cradle allows easy one handed insertion and removal.

► Can be used with EC5X with

standard or extended capacity battery and with/wrthout Boot. Cradles versions also available for

RAM lntelliSkin® EC5X Boot.

► Uses RAM GDS 5.5mm barrel jack

connector for connection to power source.

► Compatible wrth RAM two-hole

AMPS pattern diamond bases that will

connect to Band C size ball mounts ,

| ****


► For Charging:

RAM Cigarette Charger (RAM­ P0 W-CIG-M55)

OR

RAM/GDS Modular Hardwire Charger (RAM-GDS-CHARGE-V?­ M55U)

► For Mounting:

RAM 2-hole AMPS pattern diamondball mount (RAM-B-166U, RAM-B-238Uor see RAM website

for other options).

 |  | allowing for a wide variety of mounting options.|
https:/ /www.rammount. com
Un-Powered Cradles and Holders (passive holders, no charging support)
Part Number| Picture| Description| Notes| Required Items
CRD-EC5X-VCH1-01| | Vehicle Holder| ►Holds EC5X in vehicle installations.

►Suction cup for easy installation

and removal.

►USB-C port on bottom of de vice is

accessible for charging.

►Does not support Trigger Handle or

other snap-on accessories.

►Spring tension on holder provides

compatibility for devices with or without Rugged Boot attached.

|
---|---|---|---|---
KIT-EC5X-VEHBNDL-01| | Vehicle KIT| ►Kit includes:

-Vehicle Holder (CRD-EC5X-VCH1-01)

– Cigarette Lighter Adapter (CHG-AUTO-USB1-01)

– USB-C Cable (CBL-TC5X-USBC2A- 01)

– Protecti ve Boot (SG-EC5X-BOOT1- 01)

– Screen Protector

(SG-EC5X-SCRNPT1 -01)

|
various SKUs (3rd party) •| | ProClip Vehicle Holders| ****


► Holds EC5X in vehicle installations.

►  Versions available for devices with

and wrthout Rugged Boot installed.

► USB-C port on bottom of device is

accessible for charging.

► Durable cradle design for rugged

enterprise use.

► Cradle provided 15 degree angle in

any direction.

►  Allows for portrait and landscape

view.

►  AMPS hole pattern for simple wall,

pedestal or vehicle dashboard mounting.

|
http://www.proclipusa.com/category/zebra


Misc

Part Number| Picture| Description| Notes| Required Items
SG-STYLUS-TCX-MTL-03

(pack of 3)

| | Fiber Tipped Stylus| ►Black Passive Stylus with Zebra logo

►5″ length

►Heavy duty – made  from stainless

steel and brass. No plastic parts – real

pen feel.

►Can be used in rain.

►Micro-Knit Hybrid Mesh Fiber Tip

provides silent, smooth gliding use.

►Big improvement over rubber tipped o

plastic tipped stylus.

►Compatible with all capacitive touch

screen devices.

► Use of tether straps is not recommended with EC5X since there are no tether attachment points available.

|
---|---|---|---|---
Other Stylus| | Rubber or Plastic Stylus| ►Not supported – Stylus Mode is NOT supported on the EC5X.

►Hard Plastic/Rubber stylus such as

SG-TC?X-STYLUS-03 will not work.

►Fiber Tipped Stylus (SG-STYLUS-TCX

MTL-03) will work – does not require Stylus Mode on device.

|
SG-EC5X-SCRNPT1-01

(single)

| | Screen Protector| ►Tempered glass

►Includes one screen protector, alcoho

wipe, cleaning cloth, and tools needed for screen protector installation.

|
HeadseVAudio Accessories
Wired Headsets and Audio Accessories
Part Number| Picture| Description| Notes| Required Items
HDST-USBC-PTT1-01| | PTT Headset (USB-C connector)| ►For Push-To-Talk (PTT) applications.

►Compatible with Zebra PTT Express and PTT Pro.

►Connects to USB-C port on EC5X.

►Rotating earpiece allows for right or

left ear configuration.

►Provides PTT button, volume up/volume down buttons.

►Cable length is 32 in. (81 cm)

►mono with microphone

►includes clip for attaching PTT button

to clothing.

|
ADP-USBC-35MM1-01| | USB-C to 3.5mm Adapter Cable| ►  Allo ws headsets with 3.5mm jack to

be connected to the EC5X.

►  Adapter provides PTT button , volume

up/volume down buttons.

►  Adapter cable length is about 2.5 ft.

(78 cm).

► Clip on rear of adapter allows cable to

be wrapped for length management.

► PTT button functionality tested with

the following headsets :

– HDST-35MM-PTVP-02

Both the PTT button on the headset and the adapter may be used.

Other headsets with a PTT button not listed abo ve may not work properly and their PTT button will not be detected. This includes: HDST-35MM-PTT1-01 and HDST-25MM-PTVP-01. PTT

button on the adapter will need to be

used instead.

►  Allow s many Google compliant 3.5mm

“consumer” headphones to function as a PTT headset while still allowing the headphone’s “play/call/pause” button

to operate as normal.

|
---|---|---|---|---

HDST-35MM-PTVP-02

| |

PTT  Headset (3.5mm Locking jack)

| ►For Push-To-Talk (PTT) applications.

►Compatible with Zebra PTT Express

and PTT Pro.

►Uses 3.5mm rugged jack that is

keyed/collared for a locking failsafe connection.   NOTE:  EC5X does not

support this locking connection.

►Rotating earpiece allows for right or

left ear configuration

►Built-incord wrap

►mono with microphone

►includes clip for attaching PTT button

to clothing.

►Either the PTT button on the headset

or the PTT button on the required USB­

C to 3.5mm Adapter (ADP-USBC- 35MM1-01) can be used.

►                  I mproved resistance to cleaning and

sanitizing products vs. HDST-35MM­ PTVP-01

|

►  USB-C to 3.5mm Adapter Cable (ADP- USBC-35MM1-01

HDST-35MM-PTVP-01|

| PTT  Headset (3.5mm Locking jack)| ►To be discontinued 8/2023, now use HDST- 35MM-PTVP-02 – see PMB

►For Push-To-Talk (PTT) applications .

►Compatible with Zebra PTT Express

and PTT Pro.

►Uses 3.5mm rugged  jack that is

keyed/collared  for a locking failsafe

connection. NOTE: EC5X does not support this locking connection.

►Rotating earpiece allows for right or

left ear configuration

►Buill-in cord wrap

►mono with microphone

►includes clip for attaching PTT button

to clothing.

►Either the PTT button on the headset

or the PTT button on the required USB­ C to 3.5mm Adapter (ADP-USBC- 35MM1-01) can be used.

|

►  USB-C to 3.5mm Adapter Cable (ADP- USBC-35MM1-01

SL+1W-3.5WA

(3rd party)•

http s:// workforceaudio.com

| | Workforce Audio Snaplock PTT Adapter Cable| ►For Push-To-Talk (PTT) applications.

►Compatible with Zebra PTT Express and PTT Pro.

►3 . 5 mm jack

► Adapter cable provide Snaplock

connector which accepts a variety of Workforce Audio’s earpieces.

►includes clip for attaching PTT button

to clothing.

►Built to handle the everyday inevitablE

| ►  USB-C to 3.5mm Adapter Cable (ADP-USBC-35MM1-01)

►  Also requires purchase of earpiece for connecting to cable.

---|---|---|---|---
 | |  |

drops

►Dustproof, sprayproof and waterproof

►Ready for the freezer and outdoor

subzero temperatures

►                  Feather-light for extraordinary comfort

►Noise cancellation for a superior voice

experience in the noisiest

environments

►Detachable swivel boom minimizes

costs.

►Swivelling boom mutes microphone

allowing uses to prevent voice pick

applications from recognizing non-voice pick conversations.

►User-replaceable pads and

windscreens maximize comfort and

hygiene.

►  Can be used as a PTT headset when

used with the required USB-C to 3.5mm Adapter (ADP-USBC-35MM1-

01\.

|

►  USB-C to 3.5mm Adapter

 |  | Cable (ADP-USBC-35MM1-01)
 |  | ► HS2100 to 3.5mm Standard
 |  | Cable (CBL-HS2100-3MS1-
See HS2100-HS3100| HS2100 Rugged Wired| 01)
Accessories Document| Headset|
 |  | See HS2100/HS3100
 |  | Accessories Document for
 |  | additional headset
 |  | accessories
VR12

(3rd party)•

http://www.blueparrott.com

| | BlueParrott VR12 Wired Noise Cancelling Headset|

►  Audio accuracy for voice picking and other speech recognition applications.

► High quality durability stands up to all­ day, every-<1ay use.

► Lightweight design is easy and comfortable to wear all day.

► Compatible with most major wearab le

computers and devices used in voice­

picking environments.

► G type (GN Netcom) Quick Disconnect.

► Convertible design gives choice of over-the-head and behind-the-neck

| ►  USB-C to 3.5mm Adapter Cable (ADP-USBC-35MM1-01

►  RCH50/RCH51 Quick Disconnect Headset Adapter Cable (ADP-35M-QDCBL1-01)

 |  | wearing styles|
3rd party·| | USB-C Headsets| ►Headset connects via the bottom USE C connector on device.

►Must be Google certified USB-C headset.

|
CBL-HS2100-3MS1-01| | HS2100 Headset Standard Cable (3.5 mm jack)| ►3. 5mmbarrel jack connector

►For use with EC5X, TC20,

TC21fTC26, TC5X, TC?X, TCBX, or

other devices using a 3.5mm barrel jack audio connector

►Ca b el     is 43″ ( -1   1 .  M) long

►Rugged cablew ith rugged connector., that are keyed/collared for a locking

failsafe connection. NOTE: EC5X does not support this locking connection.

►Includes one clothing  clip.  Additional

clips can be purchased separately.

|

►     USB-C to3. 5mm Adapter Cable ( ADP- USBC-  3S MM 1_01)

---|---|---|---|---
ADP-35M-QDCBL 1-01| | RCH50/RCH51 Quick Disconnect Headset Adapter Cable| ►Connects RCH50 /RCH51 headset (or headsets w h Quick-Disconnect

connector) to devices with 3-pole 3.5mm barrel jack connector.

►Cable features a rugged

keyed/collared jack for a locking failsafe connection. NOTE: EC5X does not support this locking connection.

|

►  USB-C to 3.5mm Adapter Cable (ADP-USBC-35MM1-01)

Bluetooth Headsets and Audio Accessories

NOTE: Bluetooth headsets with PTT function not supported by Zebra PTT Express application. Check Zebra WFC Central Client app Re,ease Notes to verify compatibility.

Part Number| Picture| Description| Notes| Required Items

See HS2100-HS3100

Accessories Document

| |

HS3100 Rugged Bluetooth Headset for VDP applications

|

HD Voi c e , also know n as W i de Band A ud i o , b r ings i n:::redble aud i o clari ty

Bui l t t o handle t he everyday inev i table d r o ps

Du s t proof , sprayproof ard waterproof

R eocty fDf t he f reezer ard o ut door s u bzer o

t empera tu res

F ea t hef -li g ht f or ex t ra orc:inary com f or t

N oise c ance ll a t ion tu ned fo r V DP (voi c e directed

pick i ng) a f:l)licatioos .

N otdesign ed for t he agress i ve ncise cancella ti on

req u ired f or Vo IP or voice cal l s . H ea::lse t s serd l evel is rot tuned to satisfy VoIP or vdce standards and will result with audio being quieter at the far erd and

de l iver i rg m cre noise .

Sw ap batteries on t he fly w i thru t losing t he

Blu e t oo th connec t ion

Split- second tap- t pair simplici t y using NF C .

D eta c hable sw i vel tx:o m min im i zes c os t s .

Sw i velling toom mut es m ic roptone allo.ving uses t o

preve nt voice p ick applicatioos from recqJn i zing non­

vo i ce pi ck c onver sa ti ons.

U ser-r ep l aceab l e pads and w indscreens m aximi z e

co mf o- t and hygiene

1 5 tnurs of batt ery power

|

See HS2100/HS3100

Accessories Document for headset accessories

various Bluetooth models

| |  | ►  Various Bluetooth models available with options that include:

– Blocking out 96% of background noise

– Over 24 hours of talk time

– NFC Tap to Pair capable

– Bluetooth wireless range capable up to 300 ft.

– Convertible wearing options: over the head, behind the neck.

See BlueParrot site for model specific options.

|
8550-XT|
8350-XT

C400-XT

|
C300-XT| BlueParrott Bluetooth

Headsets

(3rd party) •|

http://www.blueparrott.com

|

APTT1

(3rd party) •

https :// www .aina- wire1e ss.com/

| | Aina Push-To-Talk (PTT) Bluetooth Voice Responder Remote Speaker/Mic (RSM)| ►Bluetooth  speaker-microphone

designed to work with different walkie talkie style Push-to-Talk applications, including Zebra PTT Pro (check with Zebra PTT Pro engineering team for

current device /OS support).

►Includes clip for attaching de vice to

closthing for lapel speaker/mic usage.

►Features several buttons which the

application developers can assign to

different functions .

►Users can remotely control functions

such as push-to-talk, phone calls, channel switching and emergency

alerts.

►Device is ruggedized, MIL-STD 810G and IP67.

►Long lasting battery designed for 24

hour approx battery life. Can be

recharged via micro-USS port.

► Includes 3.5mm headset jack allowing

headphones to be connected for keeping conversations more private.

►Can be easily paired to mobile computer using NFC tap-to-pair .

|
---|---|---|---|---
BTR-155

(3rd party)•

https :/l www.s avoxaccessories. c om

| | Savox BTR-155 Bluetooth Remote Speaker/Mic (RSM)| ►Bluetooth  speaker- microphone designed to work with different walkie talkie style Push-to-Talk applications,including Zebra PTT Pro (check with Zebra PTT Pro engineering team for

current device /OS support).

►Includes clip for attaching device to

closthing for lapel speaker/mic usage.

►Rugged wireless speaker microphone

IP55.

► Allows cable-free movement

►Familiar speaker microphone

functions; PTT and volume buttons

►Includes 2.5mm headset jack allowing

headphones to be connected for

keeping conversations more private.

►LED status indication

►High speaker volume

►Includes:

-Savox RSM

– Modular Wired earpiece

– Wall Charger

– USB Cable

– Quick Start Guide

– Carrying Strap

|

,

various

(3rd party) ·

http://stonemountainltd.com

| | Stone Mountain BluSkye Bluetooth Remote Speaker Mic (RSM)| ►Bluetooth speaker-microphone designed to work with different walkie talkie style Push- to-Talk applications, including Zebra PTT Pro (check with Zebra PTT Pro engineering team for

current device /OS support).

►Device is ruggedized, MIL-STD 810G

and IP68.

|
Power Cords/Power Supplies
AC Cords and Power Supplies
Part Number| Picture| Description| Notes| Required Items
CBL-DC-388A1-01| | DC Power Cord| ►Used to power Single Slot Cradles

and 4-Slot Battery Chargers when

using Level VI Efficiency power supply (PWR-BGA 12V50W0WW)

►Cable length is 1.8 meters

►NOTE: All EC5X Single Slot Cradles

include this cable.

|
---|---|---|---|---
PWR-BGA 12V50W0WW| | Power Supply| ►Replaces PWRS-14000-148R

►Used to power Single Slot Cradle and 4-Slot Battery Charger

► 100-240 VAC,12VDC,3.33A

►►Leve l   VI Efficiency rated

NOTE: All EC5X Single Slot Cradles

include this power supply.

| ►DC Power Cord (CBL-DC-

► A 1_01) 388

AC   Line Cord(  2384-4 oo-00F or country specific version)

KIT-PWR-12V50W| | Power Supply Kit| ►Includes Power Supply (PWR- BGA12V50W0WW) and DC Line Cord (CBL-DC-388A 1-01)| ►  AC Line Cord (23844-00-00F

or country specific version)

CBL-DC-381A1-01| | DC Power Cord| ►Used to power 4-Slot Cradles when

using Level VI Efficiency power supply

(PWR-BGA 12V108W0WW).

►NOTE: EC5X 4-Slot Cradle KITS

include this cable.

►This cable does not include the black

extension release latch which is not

required when used on Multi-Slot Cradles.

|
CBL-DC-382A 1-01| | DC Power Cord| ►Used to power 4-Slot Cradles when

using Level VI Efficiency power supply

(PWR-BGA 12V108W0WW).

►NOTE: EC5X 5-Slot Ethernet

ShareCradle KIT includes this cable.

►                  Cable has black extension tab for

releasing the cable from the back of the cradle. This isn1 required when using Multi-Slot Cradles.

|
PWR-BGA 12V108W0WW| | Power Supply| ►Replaces PWRS-14000-241R

► Used to power 4-Slot and 5-Slot Cradles

►9A, 108W

►Level VI Efficiency rated

| ► DC Line Cord (CBL-DC- 381A1-01 orCBL-DC-382A1- 01)

► AC Line Cord (23844-00-00F

or country specific version)

23844-00-00R| | AC Line Cord| ►Used to power Gradles.

►This AC Line Cord is for use in North

America. See the AC Line Cords by Country TAG for comparable line cords to use in other countries.

|
PWR-WUA5V12W0US

(US plug style)

PWR-WUA5V12W0GB

(UK plug style)

PWR-WUA5V12W0EU

(EU plug style)

PWR-WUA5V12W0AU

(Australia plug style)

PWR-WUA5V12W0CN

(China plug style)

PWR-WUA5V12W0IN

(India plug style) PWR-WUA5V12W0KR

(Korea plug style) PWR-WUA5V12W0BR

(Brazil plug style)

PWR-WUA5V12W0LA

(Argentina/Chile/Mexico plug styles)

|

| USS Power Supply|

►Used with USB-A to USB-C cable

►Provides 2.5A current for fast

charging

►  100-240 VAC, 5 V, 2.5 A

|

In-Vehicle Power Supplies

Part Number| Picture| Description| Notes| Required Items
CHG-AUTO-USB1 -01 CHG-AUTO-USB1 -BR

(for Brazil)

|

| USB Cigarette Lighter Adapter| ►Used with USB-C Cable

► Includes two USB A ports providing

higher current (2.5A) for faster charging

|
Batteries
Part Number| Picture| Description| Notes| Required Items

BTRY-EC5X-ST1-01 BTRY-EC5 X-ST1-BR

(for use in Brazil)

BTRY-EC5X-ST1 -IN

(for use in India)

| |

Replacement Battery, Standard Capac

|

►3 060 mAh

►PowerPrecision enabled

|

Battery Door for Standard Capacity Battery (KT-EC5X­ STDBTYD1 -01), if converting from device with Extended Capacity Battery

BTRY-EC5X-EX1-01 BTRY-EC5X-EX1-BR

(for use in Brazil)

BTRY-EC5X-EX1-IN

(for use in India)

| | Replacement Extended Capacity Battery

| ►4180 mAh

►PowerPrecision enabled

| Battery Door for Extended Capacity Battery (KT-EC5X­ EXBTYD1-01 ), if converting from device with Standard Capacity Battery
KT-EC5X-STDBTYD1-01| | Battery Door for Standard Capacity Battery| ►Door is required when using Standard Capacity Battery (BTRY-EC5X-ST1-01)

►                  Typically ordered as a replacement

cover or when converting  from Extended Capacity Battery to Standard Capacity Battery.

|
KT-EC5X-EXBTYD1-01| | Battery Door for Extended Capacity Battery| ►Door is required when using Extendec Capacity Battery (BTRY-EC5X-EX1-01)

►Typically ordered as a replacement

cover or when converting  from Standard Capacity Battery to Extended Capacity Battery.

|

EMC PrOOuct Line- ECSXTAG

Zebra Confidential. For the recipient’s internal use only

Document Update date: 6/26/23

NOTE: Items highlighted in grey may not be orderable/available

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals