Jeremy Cass FLGJXYJGR60517 1.38-cu ft High Efficiency Impeller Top Load Washer Instruction Manual

Jeremy Cass FLGJXYJGR60517 1.38-cu ft High Efficiency Impeller Top Load

Washer

Brief user guide

Control panel instructions

Spin Dry Quick Start

• Touch the power key.
• Hold down the water level key to enter into the spin only program and begin.

Water level / Powder Level

• Put in correct powder level according to the selected water level and to the preferred cleanliness of clothes.
  [washing dose please refer to the indicator diagram]

Information window

• Pressing the “power key, will show the standard program which Is set at 01; Select your program code & required wash/spin time which are shown in a alternate display. Select the required water level by pressing “water level” and entering the correct code as shown on the control panel.
• If the operation is incorrect, the display will show the wrong
• Information; If E2 is displayed on the screen, it means the cover has not been closed property.
• Display delay start time.

Delay start

• First press Power key.
• Hold down the “Program/ delay star key to enter into delay start setting, press the button again to increase the delay start time by 1 hour and repeat until the time required is displayed. The maximum delay start is 24 hours.
• Once you have selected your time press the “Start” key, flashing indicator light in the lower right comer, setting time and then start work.

Child lock

• In operation status, press and hold the “Water level” and ‘Program* key at the same time. The display window will show the letters “CL’, all buttons will stop working. If the door is opened at this time, the washing machine will come to an immediate halt. If the door is not closed in under 5 seconds the washing machine will drain its water automatically and the machine will sound an alarm.
• In operation status, press and hold the ‘Water level” and ‘Program* key at the same time again to unblock the child lock function, then all keys can work again.

Water level selection

• Press the “Water level® key to enter in to program selection status, press again and repeat to increase the selected water level as required. 1 water level, as: 1L to 8L. (L = level not liters)
  • 1L =Minimum
  • 8L=Maximum
• Select suitable water level according to the qty of clothes.

Program Selection

• Press “program” to enter into program selection status.
• Select suitable wash process according to wash clothes please always read the label on the clothing before washing.

Start/Pause

• After plugging in the washing machine and turning on the power, press Start/ Pause key to start the program.
• Press it again when machine in operation to pause or change the computer program.

Power on/off

• Press for power on; press again for power off.
• For your safety, if the machine detects any abnormal behavior it will automatically tum itself off If the machine is idle for 10 minutes it will automatically switch off to conserve electricity,Please turn the machine back on by using the power button and selecting your program.

Remark:

• If you wish to delay the washing machines progress for any reason all you need to do is push the start/pause button again.
  Pushing the button again will begin the process; if this does not work, restart the machine by pushing the power button, the internal memory will continue its process automatically.

• After an Alarm has sounded due to improper activity, the machine will automatically switch off after 1 hour.

• If the machine is on standby for 10 minutes or longer in operation, the machine will automatically switch off.

• The machine was tested before leaving factory.It’s normal if there is some water ,please feel easy yo use.

Reminder and Error Code

Reminder:

1. Each machine is tested for water intake and drainage during production. Therefore, there may be water residues or traces of water inside the washing tub, which is a normal phenomenon.
2. Please remove the bottom foam before using the new machine! Plastic bracket is only keep the washing machine safe when shipment,the user can remove it or keep it.

Common faults

Instructions

Tools Required: Pliers, If needed

1. Check faucet for old aerator, remove old aerator If It exists. Use pilers If needed, being careful not to grip too tight.
2. Remove any washers that may be caught up Inside of faucet spout.
3. Separate the 2 parts of Quick Connect Adapter (B+C).
4. Place new Washer (A) Into spout and then Install new Adapter (B), turning clockwise. Hand tl1hten only.
5. Attach the dishwasher hose to the Brass Coupler (C). Tlghten with pilers. Snap Coupler (C) orito Adapter (B).
6. Tum on water. If leak occurs, tighten with pilers.
   Note: There are 3 washers In the Adapter (B), only need to take out the top Washer (A) during using.

Reduce Water Use & Save Money
Danco aerators are Water Sense certified, which means they reduce water and save money.
Upgrade to a Danco aerator at your local home Improvement store.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>