pTron Pulsefit P261 Bluetooth Calling Fitness Smartwatch Instruction Manual

: June 4, 2024
: pTron

pTron Pulsefit P261 Bluetooth Calling Fitness Smartwatch

pTron-Pulsefit-P261-Bluetooth-Calling-Fitness-Smartwatch-product-
image

Caution:

This smartwatch is not a medical device.
A Thin Transparent Protective Film Covers the Sensor at the Backside of the Dial, protecting the Sensor Glass from scratches.

Charging the Smartwatch

Turn OFF the Smartwatch before Charging.
Put the smartwatch on the charging adapter and gently push the dial down to make sure that the 2 small round charging contacts at the backside of the dial are touching the 2 charging points in the adapter. It’s a completely sealed system free of exposed contacts. Plug the USB end of the cable into a DC5V/1A power source.
When the smartwatch is fully charged, remove the watch from charging and unplug the USB charging cable from the power source.
NOTE: You can directly check the charging by pressing the crown-like button on the right side of the dial. Pressing once will show the charging status on the display.

Downloading the Mobile App – pTron Fit+

For downloading the App go to Google Plays tore/iOS App store and search for ‘pTron Fit+’. Now, download and install the app.

OR

Switch on the smartwatch, tap 1 time on the screen, then slide the screen 5 times from bottom to top, and there you will find an icon with the name QR code along with a QR code logo. Just tap/touch 1 time this logo and then you will get a QR code on the screen. Now, you can scan the QR code from your mobile phone. After scanning you will get a link i. e,
https://ptron.in/pages/ptron-app-for-smartwatches

pTron-Pulsefit-P261-Bluetooth-Calling-Fitness-
Smartwatch-01

Just click on this link and you will get app download option for both Android as well as iOS.

Pairing

After mobile App installation, open the App and set up your profile.
Now, go to the smartwatch option and there you will find “Bind device”.
Click on “Bind device” & then select your smartwatch.
In this way your smartwatch will get paired with your smartphone.

Audio Connectivity

At first turn the display to glow the light of display screen or press the crown button of the Smartwatch. (Awake the smartwatch display by pressing the crown-like button upper side of the dial.)
Then slide the display screen to the upper side. (Touch the screen and towards upper side.)
Click on the icon which is shown by the arrow mark in the picture and you will get Dual – mode option.
Click on ON.
Now, open the Bluetooth function on your smartphone.
Search for “pTron Audio” in the available Bluetooth devices list.
Click and connect with “pTron Audio”.
Now, the smartwatch is connected with the mobile for calling purpose.

Important:

If the calling feature will be not used then the Dual mode option will get turned off automatically in some time.
Keep the smartwatch closer to your mouth while making or receiving calls through this watch for clearer voice capture.

Use the Touch Screen

pTron-Pulsefit-P261-Bluetooth-Calling-Fitness-
Smartwatch-03

Phone Call

After connecting the smartwatch with the phone, you can use the smartwatch to dial and to control the phone calls – making & answering calls.
You can save up to 8 contacts in the smartwatch through the mobile App.
Open the mobile App, go to smartwatch option & then go to Frequent/Common Contacts and there you can select 8 contacts in the address book and display their shortcuts in the smartwatch.

Music Player

After connecting the smartwatch with a smartphone, you can remote control the music player on your phone through the smartwatch.
You will get Play/Pause/Next Song/Previous Song options on the display.
You can Listen Music on your Watch, when it is connected to your Phone Via Bluetooth Mode.
NOTE: pTron Audio is the BT name of the smartwatch and it must be connected. If this is not connected then please connect it. If while searching BT you are unable to find
pTron Audio then go to Dual mode option and ON it.

Steps

Smartwatch automatically tracks the steps and can be seen in the watch and the Step details (Daily, weekly & monthly) can be seen in the pTron Fit+ app. Need to wear the smartwatch properly to get the real data.
Note: At midnight the data or the movement stats will get zero automatically.

Sleep

Wear the smartwatch properly before sleeping, then it will provide the data of hours slept and the quality of sleep stats in the mobile App and in the smartwatch.
Note: It will enter sleep mode automatically at 10:00 PM. It will only record the sleep if it is more than 4 Hours.

Pulse

Go to Pulse menu in the smartwatch. There you will get BPM measure.
Now, once tap on the display and the smartwatch will start measuring heart rate, SPO2 and BP and you can get the measured value in the same display page of the smartwatch as well as you can see the measured result in the mobile app. The optical sensor at the backside of the dial will start flashing green light.
Note: This smartwatch is not a medical device. Need to wear the smartwatch properly. Otherwise, the smartwatch will not fetch the data and will show the result as shown in below picture.

pTron-Pulsefit-P261-Bluetooth-Calling-Fitness-
Smartwatch-04

Voice Assistant – Google & Siri

Turn on the smartwatch display.
Slide the screen from bottom to Top.
Now, you will find a Mic icon, just click on that and Speak now.
Note: Dual mode must ON and pTron_ Audio also must be connected to use this feature.

Weather

On the Weather function Page, you can view the current temperature.

Exercise

Running
Sit-up
Jumping Jack
Basket Ball
Badminton
Volley Ball
Bike Riding
Tennis

There are 8 exercises in the smartwatch. These exercises are given with a separate icon in the smartwatch. Just tap on the icon and you will find the details.
Note: To get the appropriate & correct data need to wear the smartwatch properly.

Remote Capture

For using this feature first need to open the lock of the mobile phone.
Now, you will find Camera option in smartwatch and just click on it.
You will get Start option there. Just click on that and you will see that camera will get open in your connected mobile phone.
Just turn your wrist (need to wear the smartwatch) or click on Start to capture pictures.

Other Functions – Smartwatch

Dual-mode – Click on this icon and then click on ‘ON’.
This is mandatory to ON for using calling feature.
If calling feature will be not used then Dual mode option will get turn off automatically in some interval of time.
Dial key – You can dial & make calls at any number from here.
Contacts – The number which you have saved in the app can be seen here. From here you can call these contacts.
Stopwatch – This can be used as a timer.
Find – You can search your phone with this function as when you will click on this you will get an option to Start and as you will click on Start your mobile will start ringing.There is a Stop option in the smartwatch, click on it to stop ringing.
Message – You can receive messages in the smartwatch. Also can receive social media messages. And can check the latest message history.
Reset – Can reset the smartwatch with this.
QR Code – You can scan and directly go to download option.
App View – You can change the view pattern from this. There are 2 options – Grid & Standard.
More – You will get this More option and when you click on that, you will find About, Language, time & Date.
About – In this you will find smartwatch related information.
Language – Can change language from here.
Time – Can change & update time from here.
Date – Can change & update Date from here.

Other Functions – Mobile App

Home: You can see the Target Goal here. Also can get distance, calories & Goal data. By clicking on the Steps you can check the complete summary details.
Health Report – To get the health assessment report need to click on Reevaluate and and then fill the required details.
And you can get your Health Index here. BMI & Body Fat rate can be also seen here.
Healthy Habits – There are many healthy habits already given in the app. You can add that and can take follow up of it by doing routine check up by marking system in the app.
Sports: You will find a Sports page in the app. There you will find 3 options that is Walk, Run & Riding. Choose any 1 sport and start and then you will get GPS on the page. Also, you will get score of Average Pace, Total time & Heat consumption. Need to login, otherwise GPS will be not shown.
Setting: From here you can bind device with the app. You can check the connected watch name here and can also get the version here.
Brightness Control – There you will find wrist sense option. You can enable or disable that option. If you enable the option then you can activate the watch screen via wrist movement. Also there is starting time & Ending time for this option. You can adjust this as per our convenience.
Disturb – There you will find Do Not Disturb option. You can enable or disable that option. If you enable the option then you will not receive notifications. Also there is starting time & Ending time for this option. You can adjust this as per our convenience.
Alarm – This Alarm option you will find in the app. Open the app and go to Setting option and in that page you will get this option. You can set alarm time as you wish. Total 8 alarms can be set in a single time.
Sedentary Reminder – This reminder option you will find in the app. Open the app and go to Setting option and in that page you will get this option. Just click on this Sedentary Reminder and there you can adjust this reminder as per your requirement.
Note: You can turn on/off these features via App. There is starting time 08:00 and Ending time is 22:00.
Find – When you click on this option then watch will vibrate 2 times. If need to stop earlier then can stop from the smartwatch as you will receive an Stop icon in the watch screen after clicking on this Find option.
Message Push Setting – Calls Remind, SMS Remind, We Chat Remind, QQ Remind, Facebook, Twitter, Line, WhatsApp, Instagram etc. need to enable from here for receiving the messages & call.
Frequent Contacts – Can save 8 contacts here.
Dial Settings – Can change the wallpaper from here. Also can select wallpaper from your mobile Gallery.
Reset Device – You can reset smartwatch through this option.
Remove – All data will be deleted and the connected device will be removed.
Other – In Other you will find Vibrate settings and can turn ON/Off vibration.
OTA Upgrade – If there will be any update then can be updated from here.
Background Setting – The mobile phone brand which is connected with the app will show here. Need to open the given permissions in the App, safe & effective to prevent the App from being misunderstood.
Me: You can see your login ID here Also can view Step summary here as you can get the Steps this week, Miles this week & Best record of the week data here.
User profile – The profile details & Goal step are given here and can be also updated here.
Change Password – Can change password here.
About – Here, you will get QR code of the app. You can scan and directly go to download option.
Feedback – Can give feedback. Any suggestions and comments that are very important.

Important

This smartwatch is NOT a Medical Device.
During swimming adhere to IP68 waterproof protocol.
Please connect the band when synchronizing data.
Use the 5V USB charging adapter only.
Do not expose the band in high moisture or extreme high temperatures or dry/liquid chemicals.
When the APP crashes or reboots, please check the phone memory, clear it and try again, or exit the app to reopen it.
Strap is not covered in manufacturer warranty.
Manufacturer/brand owner reserves the right to modify the content of this user manual without prior notification. Some functions are different in the various software versions, which is normal.

Disclaimer

The colors and specifications shown/mentioned in the user manual may differ from the actual product. The images shown are for representation purposes only. Other product logos and company names mentioned herein may be trademarks or trade names of their respective owners.