Corporation Pty Ltd SWIV 3 Inch Wireless Charging Station User Manual

User Manual

Package Contents

1. SWIV 3-in-1 Wireless Charging Station
2. USB-C to C Cable (1.5m)
3. User Manual

Specifications

Watch Charger 3w
Warranty| 1 Year

1. Connecting the USB-C Cable

• For optimal performance, use with a USB-C wall charger of 20W or higher.
  Wall charger not included.

  2. Place your devices on the charger

Warnings

• This device uses inductive charging. Do not place metallic objects (aside from devices which support wireless charging) on top of the charging pad.
• Avoid placing phone cases which include metallic portions on the charger. In rare cases it may not be possible to detect smaller metallic objects, such as foil logos on phone cases, and the charger may continue to operate. In these cases,the metallic object will heat up and may cause damage to the device being charged over time.
• This device is designed for indoor use only.
• Do not deliberately damage the device or expose it to damp,direct sunlight,or high temperature conditions.
• It is normal for the device to be slightly warm to touch during operation. Provide adequate ventilation and do not cover the device while in operation.
• Disassembling or failing to properly use and care for your device will void the warranty on the product.
• Do not use the product if it becomes damaged as this could pose a risk of causing damage to connected devices.
• Journey bears no responsibility for damage to the device or incidental damages arising from improper use or lack of care. Journey will not be held liable for repair or replacement of the device or other damages in these circumstances.

Troubleshooting

magnetically, a MagSafe comptaible case must be used or the phone can be used without a case (iPhone 12 and above support MagSafe natively).
iPhone is not charging wirelessly| • Check that you are using suitable USB-C wall charger. The wall charger must support power delivery and output 20W or more power.
My device charges ermittentlyint| • Thick cases can interfere with wireless charging – if using a case try removing your device from the case while charging.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Responsible Party – U.S. Contact Information
ALOGIC USA LLC
37524 Marsten DR,
Newark CA 94560 USA
EU Declaration of Conformity
Hereby, ALOGIC Corporation declares that this product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address by clicking on the Compliance Documentation link  journeyofficial.com

Innovation, Science and Economic Development Canada Statement (ISED)

This device complies with RSS-216 of the Industry Canada Rules.
Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement:
The product complies with the Canada portable RF Exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user’s body or the device is set to a lower output power if such a function is available.
This digital apparatus complies with CAN ICES-003(B)/  NMB-003 (B).

DESIGNED IN AUSTRALIA
© JOURNEY. All rights reserved. Reproduction in whole or in part without permission is prohibited. All other trademarks are the properties of their owners.
JOURNEY is the trademark of ALOGIC Corporation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>