Aqara WS-EUK03 Smart Wall Switch User Manual
- June 13, 2024
- Aqara
Table of Contents
Aqara WS-EUK03 Smart Wall Switch
Product Information
The Aqara Smart Wall Switch H1 EU (With Neutral) is a smart switch that utilizes the Zigbee 3.0 wireless communication protocol. It is designed to control the power of lights and other connected devices. This product can be paired with an Aqara hub to enable remote control via the Aqara Home app, timed control, power detection, power statistics, and other functions. It is also compatible with other smart devices for home automation. Please note that this product requires a compatible Zigbee 3.0 hub, and certain features may require a specific hub.
- Product Model: H1 EU
- Product Profile: Smart Wall Switch
Product Usage Instructions
Push Button Functions
- Short Press Once: Turn on/off
- Long Press for 5s: Reset the device/Enable network connection
- Quick Press 3 Times: Effective Range Test
Warnings
- This product is not a toy. Keep children away from it.
- Designed for indoor use only.
- Avoid using in humid environments or outdoors.
- Avoid exposure to moisture or liquids.
- Keep away from heat sources and ensure proper ventilation.
- Do not attempt to repair the product yourself. Seek professional assistance for repairs.
- Failure to follow the product use instructions may result in risks and property losses for which the manufacturer will not be liable.
Installation Method
Note : The following instructions are based on the Double Rocker version as an example.
- Ensure the power at the circuit breaker or fuse box is turned off before wiring.
- Open the switch panel using a flat-blade screwdriver.
- Loosen the terminal screw on the back of the switch and connect the live wire to the hole marked L, the neutral wire to the hole marked N, and the load (light) wire to the holes marked L1 and L2 (corresponding to the left and right buttons respectively). Tighten the terminal screws after confirming correct wiring.
- Mount the switch to the wall junction box using the provided screws, and attach the switch plate.
- Turn on the main power at the circuit breaker and test the switch by pressing the button. If the light can be controlled normally, the switch is working properly.
Quick Setup
- Add the hub to the Aqara Home app following the Hub Quick Start Guide.
- Open the Aqara Home app and tap the “+” symbol in the top right corner to enter the “Add Device (Accessory)” page.
- Tap the code-scanning icon in the upper right corner and scan the QR code on the package box, user manual, or the back of the switch. Alternatively, find and select “Smart Wall Switch H1 EU (With Neutral, Single Rocker/Double Rocker)” and add it according to the provided instructions.
Product Profile
Based on the Zigbee 3.0 wireless communication protocol, the Aqara Smart Wall
Switch H1 EU (With Neutral) is a smart switch that turns on and off the power
of lights and other connected devices. After binding with an Aqara hub, it can
implement remote control via the Aqara Home app, timed control, power
detection, power statistics and other functions, and can work with other smart
devices in smart home automation.
This product requires a compatible Zigbee 3.0 hub. Some features require a
specific hub. For a detailed list, please visit:
www.aqara.com/support
Warnings
- This product is not a toy. Please keep children away from this product.
- This product is designed for indoor use only.
- Do not use in humid environments or outdoors.
- Beware of moisture. Do not spill water or other liquids onto the product.
- Do not place this product near a heat source. Do not place it in an enclosure unless there is normal ventilation. Do not attempt to repair this product by yourself. All repairs should be performed by an authorized professional.
- This product is suitable for improving the quality of your home life and reminding you about the device status. If a user violates the product use instructions, the manufacturer will not be liable for any risks and property losses.
Installation Method (The picture shows the Double Rocker version as an
example)
Please make sure that the power at circuit breaker or fuse box is turned off
before wiring!
- Open the switch panel with a flat-blade screwdriver.
- Loosen the terminal screw on the back of the switch with the screwdriver, connect the live wire to the hole L, the neutral wire to the hole N, and the load (light) wire to the hole L1 and L2 (corresponding to the left and right buttons respectively), and tighten the terminal screws after confirming that the wiring is correct.
- Mount the switch to the wall junction box with the attached screws and mount the switch plate.
- Turn on main power at the circuit breaker, and test the switch by pressing the button. If the light can be controlled normally, the switch is working properly!
Quick Setup
- Please add the hub to the Aqara Home app according to the Hub Quick Start Guide.
- Please open the Aqara Home app, and then tap “+” in the top right corner to enter “Add Device (Accessory)” page. Tap the code-scanning icon on the upper right corner, and scan the QR code on the package box, user manual or the back of the switch, or find and select “Smart Wall Switch H1 EU (With Neutral, Single Rocker/Double Rocker)”, and add it according to instructions.
If the connection fails, please move the hub closer to the switch, connect to
power and try again.
Effective Range Test : Quick press the button on the device 3 times. If
the Hub makes voice prompts, it indicates that the device can communicate
effectively with the Hub
Indicator Light Description
| Indicator Light Status | Description |
|---|---|
| Blue light flashes once | Device is powered on |
| Blue light flashes quickly | Zigbee network is connecting |
Blue light is steady on
| Zigbee network works properly and the switch is turned on
Red light flashes quickly
| Overload and high temperature alarm
Red light flashes slowly| Zigbee network is not connected
Red light is steady on
| The switch panel does not match the in-wall power supply module
Specifications
- Model: WS-EUK03 / WS-EUK04
- Dimensions: 85.8×86×37.55mm
- Wireless Protocol: Zigbee 3.0
- Electrical Rating: 100-250VAC, 50/60Hz, Max. 8A (resistive load), μ
- Operating Temperature: 0℃～40℃ (32°F～104°F)
- Operating Humidity: 0%~95% RH, Non-condensing
- Zigbee Operation Frequency: 2405-2480MHz
- Zigbee Maximum Output Power ≤ 13dBm
- What’s in the Box: Smart Wall Switch x 1, Quick Start Guide x 1, Screw x 2
Online Customer Service:
www.aqara.com/support
Manufacturer : Lumi United Technology Co., Ltd.
Address : 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian
Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China.
Under normal use of condition, this equipment should be kept a separation
distance of at least 20cm between the antenna and the body of the user.
EU Declaration of Conformity
Hereby, [Lumi United Technology Co., Ltd] declares that the radio equipment
type [Smart Wall Switch H1 EU (With Neutral, Single Rocker), WS-EUK03/Smart
Wall Switch H1 EU (With Neutral, Double Rocker), WS-EUK04] is in compliance
with Directive 2014/53/EU. The full text of the EU declaration of conformity
is available at the following internet address: http://www.aqara.com/DoC/
WEEE Disposal and Recycling Information
- All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste.
- Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities.
- Correct disposal and recycling will help prevent potential negative consequences to the environment and human health.
- Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
UK Declaration of Conformity
Hereby, [Lumi United Technology Co., Ltd] declares that the radio equipment type [Smart Wall Switch (With Neutral, Single Rocker), WS-EUK03/Smart Wall Switch (With Neutral, Double Rocker), WS-EUK04] is in compliance with Directive 2017 (SI 2017 No. 1206, as amended by SI 2019 No. 696). The full text of the UK declaration of conformity is available at the following internet address: http://www.aqara.com/DoC/
Scan to get the Zigbee 3.0 Install Code
- Please read this manual carefully and keep it in a safe place.
- If necessary, the contents of this manual will be modified or adjusted without special notice
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>