MEGEAR EVSE 32A Portable EV Charger User Manual
- June 4, 2024
- MEGEAR
Table of Contents
MEGEAR EVSE 32A Portable EV Charger
PRODUCT DESCRIPTIONS
IMPORTANT SAFETY INSTRUCTIONS
Please read these Important Safety Instructions and the Charging Instructions in your vehicle owners’ manual before charging your electric vehicle. Failure to do may result in death or serious injury. Keep this user guide for future reference. There are many safety features built into the charger. Read all safety information and warnings in this guide to be aware of any hazards and risks associated with the charger.
CAUTION
- Incorrect installation and testing of the charger could potentially damage either the vehicle’s Battery or the charger itself. Any resulting damage is excluded of the warranty for the charger.
- Do not operate the charger in temperatures outside of the range from -13°F (-25°C) to 131°F (55°C).
- Ensure that the charging cable is positioned so it will not be stepped on, tripped over, or subjected to damage or stress.
- To reduce the risk of electrical shock, Please connect to properly grounded outlets. Never leave children unattended while the vehicle is charging and never allow children to play with the charging cable.
- When you find that the electric vehicle cable is frayed, the wire is exposed, or the charger box is damaged, please stop using the product immediately.
- If the plug provided does not fit the outlet, do not modify the plug, arrange for a qualified electrician to inspect the outlet.
- This equipment should be installed, adjusted, and serviced by qualified electrical personnel familiar with the construction and operton of this type of equipment and the hazards involved. Failure to observe this precaution could result in death or severe injury.
- Lock out all electrical source circuits feeding the charging unit in the open position before beginning wiring or termination. Failure to follow the instructions could result in server bodily injury or death.
GENERAL CHARGING STEPS
- Connect power cord to grid.
- When the display shows Ready status, click the buon to select the current: 10A/16A/20A/24A/32A
- Link the connector of the EV Charger to your electric vehicle, then charging.
- When charging is complete, unplug the connector from the car.
SPECIFICATION
ELECTRICAL CHARACTERISTICS SPECIFICATIONS
| Rated Voltage | 240VAC Single Phase |
|---|---|
| Rated Current | 10A/16A/20A/24A/32A |
| Insulation Resistance | >5MΩ,DC500V |
| Contact Impedances | 0.5MΩ Max |
| Withstand Voltage | 2000V |
| Fireproof Grade of Rubber Shell | UL94V-0 |
| Mechanical Life: Unloaded Plugged | >10000 |
| Plastic Shell | Thermoplastic Plastic |
| Conductor | Copper Alloy, Sliver Plated Surface |
| Working Environment Temperature | -13°F (-25°C) to 131°F (55°C) |
| Insertion and Extraction Force | <80N |
*Ground Fault Detection
| When ground fault is detected, the red indicator light will on. The charging function will still work.
SAFETY PROTECTIONS
- Vehicle pulsating DC leakage protection
- Pressure resistant flame retardant
- Electrostatic protection
- Protecting earthing detection
- Undervoltage protection
- Intelligent kernel
- Crush test
- Circuit board Temp sensor
- Overvoltage protection
- Water-proof protection
- Lightning protection
- Overcurrent protection
WARNING
- Please do not install or use the charger near flammable, explosive, harsh, combustble materials, chemicals or steam.
- Please do not use the charger when it is defectve, cracked, worn, broken, otherwise damaged or cannot be operated.
- Please do not atempt to open, disassemble, repair, tamper with, or modify the charger. The charger is not user serviceable.
- Please do not use the charger when either you, the vehicle or the charger is exposed to severe rain, snow, electrical storm or other severe weather.
- Please do not forcefully pull the charging cable or damage it with sharp objects.
- Please do not insert foreign objects into any part of the charging vehicle connector.
- If the AC wall plug feels hot while charging, unplug the unit and replace the AC outlet.
- If the socket of the charger is aging or the wires are exposed, please ask a professional electrician to replace the socket in me.
- Turn off the input power at the circuit breaker before cleaning the charger.
- Use the charger only within the specified operatng parameters.
- Using a worn or damaged AC outlet may cause burns or start a fire.
LCD STATUS INDICATOR AND DEFINITION
LCD DISPLAY DETAILS
- The current you choose (10A/16A/20A/24A/32A)
- Actual working voltage
- Actual working power
- Actual working current
- Operating temperature
- Charging time
- Working status
LCD DISPLAY STATUS
LCD DISPLAY STATUS
Operating status of the display
|
Definition
| Indicators/Status
LCD1
(Green)
| LCD2
(Green)
| LCD3
(Green)
| LCD4
(Red)
Ready| Wairing
connection
| Light On| Light Off| Light Off| X
Charging| Charging| Racing
Light
| Racing
Light
| Racing
Light
| X
Connect| Charging
complete
| Light On| Flash| Light Off| X
Err: CP| CP signal
is abnormal
| Light Off| Light Off| Light Off| Flash 1 times
every other 2S
Under Voltage| Under voltage| Light Off| Light Off| Light Off| Flash 2 times
every other 2S
---|---|---|---|---|---
Over Voltage| Over voltage| Light Off| Light Off| Light Off| Flash 3 times
every other 2S
Elec Leakage| Electric
leakage
| Light Off| Light Off| Light Off| Flash 4 times
every other 2S
Over Current| Over current| Light Off| Light Off| Light Off| Flash 5 times
every other 2S
Over temperate| Circuit board
exceeds 85°C
| Light Off| Light Off| Light Off| Flash 6 times
every other 2S
/| Grounding
is abnormal
| X| X| X| Light on
/| Self-checking
failure
| Light Off| Light Off| Light Off| Flash 8 times
every other 2s
Note: X indicates that the light is on or off
NOTE: Grounding is Abnormal
-
Why the red light is on?
When ground fault is detected, the red indicator (LCD4) light will on.
It’s just a reminder. The ev charger will operate normally without the ground wire because it is not a part of the conducng path which supplies electricity to the appli-ance. We suggest your outlet should be grounded. -
Acton You Need To Take:
Find an electrician to check if the ground wire of the home outlet is connected. -
Why is grounding important?
The most important reasons for grounding wire is that it can protect your ev charger, your home and everyone in it from surges in electricity. If your electrical system is grounded, all of that excess electricity will go into the earth — rather than frying everything connected to your system.
TROUBLESHOOTING
| DIAGNOSTIC | SUGGESTIONS |
|---|---|
| Have power, no connection | Connect the electric vehicle |
| Connection, no charging | Start charging |
| Charging | Keep the unit away from water |
| Finished Charging | Un-plug the power and take good care of the |
unit
Communication Fault| Check the car side whether it is connected
Overload Protection| Check circuit and socket; Un-plug & re-plug
the charger
Abnormal Current (SCP)| Check circuit and socket; Un-plug & re-plug
the charger
Leakage Protection| Check circuit and socket; Un-plug & re-plug
the charger
Overvoltage/Undervoltage Protection| Check circuit and socket; Un-plug & re- plug
the charger
Unit Overheating Protection
| To restart, un-plug for a time then re-plug
the charger
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>