Beyma PRO8MI 200W Rms Speaker User Manual
- June 13, 2024
- beyma
Table of Contents
Beyma PRO8MI 200W Rms Speaker
DESCRIPTION
The Beyma PRO8MI is a speaker with a continuous power handling capacity of 200W RMS that was developed specifically for use in professional audio applications. It has a woofer with a diameter of 8 inches, a solid design, and high-quality materials, which enables it to reproduce both the midrange and the low frequencies. The Beyma PRO8MI is a popular choice for sound reinforcement in live events, recording studios, and diverse audio installations due to its efficient design, which enables it to deliver clean and accurate sound.
SPECIFICATIONS
- Brand: Beyma
- Speaker Type: Subwoofer
- Mounting Type: Flush Mount
- Included Components: Beyma
- Product Dimensions: 6 x 8 x 3 inches
- Item Weight: 4 pounds
- Item model number: PRO8MI
WHAT’S IN THE BOX
- RMS Speaker
- User Manual
FEATURES
The Beyma PRO8MI 200W RMS Speaker is a high-performance audio driver that is both flexible and adaptable. It was created specifically for use in professional settings.
The following are its primary characteristics:
-
Management of Power:
The speaker is capable of handling up to 200 watts of continuous RMS power, which enables it to handle demanding audio signals and produce music that is both clear and powerful. -
Woofer Dimensions:
The woofer in the Beyma PRO8MI has a diameter of 8 inches, making it an excellent choice for the reproduction of both the midrange and the low frequencies. -
Construction Quality:
The speaker is built with components and materials of the highest quality, assuring its endurance and dependability even in harsh settings. -
Sensitivity:
The PRO8MI has a high sensitivity rating, which enables it to effectively convert electrical power into acoustic output. As a consequence, it is capable of producing higher volume levels while requiring a lower amount of input power. -
Response to Frequencies:
The frequency response range of the speaker is normally quite broad, providing adequate coverage of the midrange as well as the bass frequencies. -
Impedance:
The nominal impedance of the speaker is typically stated to be 8 ohms. This allows the speaker to be compatible with a wide variety of audio amplifiers. -
Voice Coil that is Ventilated:
The PRO8MI has a vented voice coil design, which helps disperse heat during high-power operation and reduces the risk of overheating as a result of the speaker becoming too hot. -
Cone of Superior Quality:
Both the material and the shape of the cone have been fine-tuned to ensure accurate sound reproduction and a low level of distortion. -
Appropriate for Use in Enclosures:
Users are given more flexibility in the design of their system configurations as a result of the speaker’s ability to perform well in both vented and sealed enclosures. -
Applications for the Professional Audio Industry:
The Beyma PRO8MI is frequently utilized in professional sound reinforcement setups, recording studios, stage monitors, and other types of audio installations where it is necessary to have sound of a high quality and to have equipment that is reliable. -
A Protracted Detour:
The architecture of the speaker makes it possible for it to have a lengthy excursion, which results in a better bass response and dynamic range. -
Substitution in Whole or in Part:
Because the PRO8MI is capable of serving as a straight replacement for a wide variety of other 8-inch drivers, it is a practical solution for upgrading speaker systems that are already in use.
CONNECTIONS
-
Terminals for Speakers:
Typically, the speaker will have two speaker terminals that can be found either on the back or the bottom of the driver. These terminals are where the speaker cables that are coming from the amplifier are connected. Positive and negative connections, respectively, are indicated by the “+” and “-” terminal labels that are often found on the PRO8MI. -
The Output of the Amplifier:
You will require speaker wire or speaker cable in order to successfully connect the PRO8MI to an amplifier. The terminal labeled “+” on the speaker should have the positive wire from the amplifier attached to it, while the terminal labeled “-” should have the negative wire connected to it. The amplifier and the speaker now have a full and functioning electrical connection thanks to this. -
Impedance:
The Beyma PRO8MI has an impedance of 8 ohms that is considered to be its nominal value. When connecting to an amplifier, check that the amplifier can manage an 8-ohm load or impedance. This is necessary in order to avoid damaging the amplifier. If you use an amplifier that has a different impedance rating than the speaker, you run the risk of inappropriate power delivery, which might potentially harm either the amplifier or the speaker. -
Networking with Crossover:
It may be necessary to add a crossover network into certain types of audio systems, particularly those with multi-way speaker setups, in order to guarantee that the PRO8MI receives the correct frequencies at the appropriate levels. The audio signal is split up into its component frequency bands by a crossover network, which then routes each band to the appropriate driver (such as the midrange driver and the tweeter driver). It’s possible that you won’t need an external crossover if you’re going to be using the PRO8MI in a full- range application.
PRECAUTIONS
It is vital to take specific precautions in order to ensure correct usage, longevity, and safety when handling the Beyma PRO8MI 200W RMS Speaker as well as incorporating it into an audio system.
These precautions may be found in the user manual. Take into consideration the following safety measures:
-
Rating for Power:
Make sure that the power rating of the speaker is not exceeded, as this could damage it. An excessive amount of power applied to the speaker can cause damage to the voice coil as well as other components, ultimately leading to the speaker’s complete and total failure. -
Compatibility with Amplifiers:
Utilize an amplifier whose impedance (8 ohms) and power handling capabilities are compatible with those of the speaker. If you use an amplifier that has an impedance that is incompatible with the speaker or a power output that is too high, you could end up damaging both the speaker and the amplifier. -
Enclosure Appropriate:
If you are going to use the speaker in a sealed or vented enclosure, you need to make sure that the enclosure is properly constructed and scaled for the speaker’s particular requirements. Problems with the sound quality or even damage to the speaker can result from an unsuitable enclosure. -
Networking with Crossover:
When using the speaker as part of a multi-way audio system that contains a crossover network, ensure that the crossover is of excellent quality and that it filters frequencies in the correct manner. This will both protect the speaker and improve its overall performance. -
Handling:
Take care not to drop or otherwise damage the speaker while you’re handling it; instead, handle it with delicacy. The internal components of the speaker are sensitive and susceptible to harm if they are handled roughly. -
Mounting:
Use the necessary screws and hardware for mounting the speaker on a baffle or within an enclosure if you are doing either of those things. Check that the mounting points are solid and secure before you use them. -
Overheating:
It is important to refrain from using the speaker at extremely high volumes for a lengthy period of time because doing so may cause it to overheat and sustain damage. -
Dust and Water: Moisture
It is important to take precautions to prevent the speaker from being damaged by excessive moisture or dust, both of which can have a negative impact on its overall performance. -
Cleaning:
If it is necessary, wipe the exterior of the speaker down with a dry, microfiber cloth while being careful. When working with the finish or the materials, you should avoid using any harsh chemicals or solvents. -
Inspection:
It is important to perform routine checks on the speaker to look for any symptoms of damage, wear, or loose connections. If you discover any difficulties, you need to fix them as soon as possible to stop the problem from spreading. -
Installation Done Professionally:
When setting up or installing a sophisticated audio system, you should seek the aid of a professional audio technician or installer to verify that the system is properly configured and that it can be operated safely. -
The Integration of Systems:
To obtain the appropriate level of sound performance, the Beyma PRO8MI must be effectively integrated into the audio system while taking into account the functionality of the other components, including crossovers, amplifiers, and other drivers.
FREQUENTLY ASKED QUESTIONS
What is the power handling capacity of the Beyma PRO8MI speaker?
The Beyma PRO8MI speaker can handle up to 200 watts of continuous RMS power.
What is the size of the PRO8MI speaker?
The Beyma PRO8MI features an 8-inch diameter woofer.
What is the nominal impedance of the speaker?
The nominal impedance of the Beyma PRO8MI is 8 ohms.
Can I use the PRO8MI speaker in a sealed or vented enclosure?
Yes, the PRO8MI speaker is suitable for use in both sealed and vented enclosures.
Does the speaker come with a built-in crossover network?
The Beyma PRO8MI is a raw speaker driver and does not have a built-in crossover. External crossovers may be required for multi-way audio systems.
What is the sensitivity rating of the speaker?
The sensitivity rating of the PRO8MI speaker is typically high, meaning it efficiently converts electrical power into acoustic output.
Can I use the Beyma PRO8MI in a car audio system?
Yes, the speaker can be used in car audio applications, provided it is appropriately integrated and powered.
Is the Beyma PRO8MI suitable for professional sound reinforcement?
Yes, the PRO8MI is designed for professional audio applications, including sound reinforcement and studio monitoring.
What type of voice coil does the speaker have?
The Beyma PRO8MI speaker features a ventilated voice coil design for improved heat dissipation during high-power operation.
Does the PRO8MI speaker have a frequency response specification?
Yes, the speaker typically has a frequency response range of around 70Hz to 6kHz.
Can I use the speaker for live performances and concerts?
Yes, the PRO8MI is suitable for live performances and concerts where clear and powerful audio is required.
Does the speaker require a break-in period?
Some users recommend a break-in period for new speakers to optimize their performance, but it's not always necessary.
What type of magnet does the speaker use?
The Beyma PRO8MI speaker typically features a ferrite magnet.
Can I use the PRO8MI speaker for home theater setups?
Yes, the speaker can be used in home theater systems to enhance audio performance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>