INDeSIT BDE 96436X W UK N Washer Dryer User Guide
- June 13, 2024
- INDESIT
Table of Contents
INDeSIT BDE 96436X W UK N Washer Dryer
Product Information
Thank you for purchasing an Indesit product. To receive comprehensive assistance, please register the appliance on www.indesit.com/register. Prior to using the appliance, it is important to carefully read the Safety and Installation Instructions. Remove the transport bolts before using the appliance. For detailed instructions on the removal procedure, consult the Safety and Installation Instructions.
Control Panel
- ON/OFF button
- START/PAUSE button and indicator light
- TEMPERATURE button
- DISPLAY
- OPTION button
- DRYING ONLY button
- DRYING button
- DELAYED START button
- SPIN button
- WASH CYCLE SELECTOR KNOB
- PUSH & GO button
Wash Cycle Table
Wash Cycle| Temperature Setting Range| Max. Spin Speed (rpm)| Max. Load for
Washing (kg)| Duration (h : m)| Max. Load for Drying (kg)| Detergents and
Additives
---|---|---|---|---|---|---
Cotton (2)| 9.0°C – 65°C| 1351| 9.0| 3:55| 6.0| Fabric softener, recommended
detergent
Synthetics (3)| 4.0°C – 65°C| 1351| 4.0| 2:55| 4.0| Fabric softener,
recommended detergent
Mixed| 9.0°C – 65°C| 1351| 9.0| 3:48| 6.0| Fabric softener, recommended
detergent
Maximum load 9 kg
Power input in off mode 0.5 W / in left-on mode 8 W| Detergents and Additives|
Recommended detergent| Residual
(*)| Energy
kWh| Total water lt| Laundry
---|---|---|---|---|---|---
** Wash cycle| Temperature| Max. spin speed
(rpm)
| Max. load for washing (kg)| Duration (h : m)| Drying| Max. load for
drying (kg)| Wash| Fabric softener| Powder| Liquid
Setting| Range| 2| 3
1| Cotton (2)| 40 °C| – 60 °C| 1400| 9.0| 3:55| | 6.0| | | | |
49| 1.40| 105| 45
2| Synthetics (3)| 40 °C| – 60 °C| 1200| 4.0| 2:55| | 4.0| | |
| | 35| 0.80| 55| 43
3| Mixed| 40 °C| – 40 °C| 1000| 9.0| | | 6.0| | | –| | –| –| –| –
4| Eco 40-60 (1)
(Wash)| **
40 °C
| ****
40°C
| 1351| 9.0| 3:48| | ****
6.0
| | | | | 53| 0.73| 59| 35
1351| 4.5| 2:54| | | | | | 53| 0.52| 57| 32
1351| 2.3| 2:15| | | | | | 53| 0.28| 38| 23
5| White| 60 °C| – 90 °C| 1400| 9.0| 2:45| | 6.0| | | | | 49| 0.90|
90| 55
6| Delicates| 30 °C| – 30 °C| 600 (**)| 1.0| | | 1.0| | | –| |
–| –| –| –
7| Colours| 40 °C| – 40 °C| 1400| 9.0| | | 6.0| | | –| | –| –| –|
–
8| Dark| 30 °C| – 30 °C| 800| 5.0| | | 5.0| | | –| | –| –| –| –
9| Antiodour| 40°C| – 40 °C| 1000| 3.5| | | 3.5| | | | | –| –| –|
–
10| 20°C| 20 °C| – 20 °C| 1400| 9.0| 1:50| | 6.0| | | –| | 49|
0.16| 90| 22
11| Wool| 40 °C| – 40 °C| 800| 2.0| | | 2.0| | | –| | –| –| –| –
12| Rapid 30’| 30 °C| – 30 °C| 1200 (**)| 4.5| 0:30| –| –| |
| –| | 71| 0.20| 45| 27
13| Wash &Dry **45‘| 30 °C| 30 °C| 1400| 1.0| | | 1.0| | | –| |
–| –| –| –
14| AirFresh| –| –| –| –| | | 1.5| –| –| –| –| –| –| –| –
15| Rinse + Spin| –| –| 1400| 9.0| | | 6.0| –| | –| –| –|
–| –| –
16| Spin + Drain** ***| –| –| 1400| 9.0| | | 6.0| –| –|
–| –| –| –| –| –
Required dosage Optional dosage
4| Eco 40-60 (4)
(Wash & Drying)| **** 40 °C| 40 °C| 1351| 6.0| 9:20| | 6.0| | | |
| 0| 3.80| 75| 33
1351| 3.0| 5:10| | 3.0| | | | | 0| 1.98| 47| 32
The cycle duration indicated on the display or instruction manual is an estimate based on standard conditions. The actual duration may vary in relation to several factors, such as the temperature and pressure of the incoming water, ambient temperature, amount of detergent, load quantity and type, load balancing and any additional options selected. The values given for programmes other than the Eco 40-60 programme are indicative only.
1) Eco 40-60 (Wash) – Test wash cycle in compliance with EU Ecodesign
regulation 2019/2014.
The most efficient programme in terms of energy and water consumption for
washing normally soiled cotton laundry.
Note: spin speed values shown on the display can slightly differs from the
values stated in the table.
4) Eco 40-60 (Wash & Drying)- Test wash and drying cycle in compliance with
EU
Ecodesign regulation 2019/2014. To access “wash and dry” cycle select “Eco
40-60” wash programme and set “Drying” option level to “ ”. The most efficient
programme in terms of energy and water consumption for washing and drying
normally soiled cotton laundry. At the end of cycle the garments can be
immediately stored to the cupboard.
Product Description
- Top
- Detergent dispenser drawer
- Control panel
- Handle
- Porthole door
- Drain pump (behind the plinth)
- Plinth (removable)
- Adjustable feet (2)
For all testing institutes:
- Long cotton cycle: set programme 1 at temperature 40°C.
- Long synthetics cycle: set cycle 2 at a temperature of 40°C.
- By selecting the 16 cycle and excluding the spin cycle, the washer-dryer will drain only. ** The duration of the wash cycles can be checked on the display.
- After programme end and spinning with maximum selectable spin speed, in default programme setting.
- The display will show the suggested spin speed as default value.
Detergent Dispenser Drawer:
Compartment 1: Do not pour detergent into this compartment 1.Detergent
should only be poured into the compartment 2.
Compartment 2: Pour washing detergent (powder or liquid) into this
compartment. If using liquid detergent, use the removable plastic partition A
for proper dosage. If using powder detergent, insert the partition into slot
B. Compartment 3: Add additives (fabric softener, etc.) The fabric
softener must never exceed the “max” level indicated on the central pin.
- Use powder detergent for white cotton garments, for pre-washing, and for washing at temperatures over 60°C.
- Follow the instructions given on the detergent packaging.
- To remove the drawer, press lever C and pull the drawer outwards.
WASH CYCLES
Follow the instructions on the symbols of the garment’s wash care label. The
value indicated in the symbol is the maximum recommended temperature for
washing the garment.
Cotton: suitable for washing towels, underwear, table cloths, etc. made
of resistant linen and cotton that are moderately to heavily soiled.
Synthetics: specific for synthetic items. If the dirt is difficult to
remove, the temperature can be increased up to 60° and powder detergent can be
used too.
Mixed: for washing lightly to normally soiled resilient garments in
cotton, linen, synthetic fibres and mixed fibres.
Eco 40-60: for washing normally soiled cotton garments declared to be
washable at 40 °C or 60 °C, together in the same cycle. This is the standard
cotton programme and the most efficient in terms of water and energy
consumption.
White: suitable for resistant linen and cotton that are heavily soiled.
Delicates: use programme 6 to wash very delicate garments. It is
advisable to turn the garments inside out before washing them. For best
results, use liquid detergent on delicate garments.
When selecting an exclusively time-based drying function, a drying cycle is
performed at the end of the wash cycle that is particularly delicate, thanks
to light handling and appropriate temperature control of the water jet. The
recommended durations are:
- 1 kg of synthetic garments –> 150 min
- 1 kg of synthetic and cotton garments –> 180 min
- 1 kg of cotton garments –> 180 min
The degree of dryness depends on the load and fabric composition.
Colours: a 40°C cycle that helps to preserve colours, suitable for cotton
or synthetic coloured garments. It allows for reducing electricity consumption
for heating the water while guaranteeing good washing results. Suitable for
lightly soiled garments.
Dark: use programme 8 to wash dark-coloured garments. This programme is
designed to maintain dark colours over time. We recommend using a liquid
detergent for the best results when washing dark-coloured garments.
When you select the drying function, at the end of the washing cycle the
machine will automatically perform a delicate drying cycle that preserves the
colours of the garments. The display will show the level “ ”. Max. load: 5 kg.
Antiodour: use programme 9 for washing garments with bad odours (e.g.
smoke, sweat, fried food). The programme is designed to remove bad odours
while preserving the fabric fibres. Synthetics fabrics or mixed loads should
be washed at 40°.
20°C: for washing lightly soiled cotton garments, at a temperature of 20
°C.
Wool – Woolmark Apparel Care – Blue:
The “Wool” wash cycle is approved by the Woolmark Company for washing wool
garments classified as “hand-washable”, provided that the wash complies with
the instructions appearing on the garment’s label and with those provided by
the manufacturer of this washer-dryer. (M1318)
Rapid 30’: this programme is designed to wash lightly soiled garments at
30° (excluding wool and silk) with a 4.5 kg maximum load in a short time: it
only lasts 30 minutes and allows for saving time and energy.
Wash &Dry 45’: select programme 13 for washing and drying lightly soiled
garments (Cotton and Synthetic) in a short time. This cycle may be used to
wash and dry a laundry load of up to 1 kg in just 45 minutes. To achieve
optimum results, use liquid detergent and pre-treat cuffs, collars and stains.
AirFresh: ideal cycle to refresh garments and remove bad odours, in
particular smoke, from cotton and synthetic items in 30’ (max. 1.5 kg) without
the washing phase.
Rinse + Spin: designed for rinsing and spinning.
Spin + Drain: designed to spin and drain the water.
DISPLAY
The display is useful when programming the machine and provides a lot of information.
The duration of the available wash cycles and the remaining time of a running cycle appear in section A; if the Delayed Start option has been set, the countdown to the start of the selected cycle will appear. Pressing the corresponding button allows you to view either the maximum spin speed, temperature and drying time values attained by the machine during the set wash cycle, or the values selected most recently (if compatible with the set wash cycle). The hourglass flashes while the machine processes the data on the basis of the selected cycle. After a maximum of 10 minutes, the icon remains steady lit and the final time remaining is displayed. The “hourglass” icon will then switch off approximately 1 minute after the final time remaining has been displayed. The “washing phases” relative to the selected cycle and the “washing phase” of the running cycle appear in section B:
When lit, the symbol indicates that the set “Delayed Start” value has appeared on the display. There are three levels in section C relative to the washing options. Section D includes the icons related to the three different drying levels as well as the icon , which lights up when a timed drying option is set.
DOOR LOCKED INDICATOR
When lit, the symbol indicates that the door is locked. To prevent any damage,
wait until the symbol turns off before opening the door. To open the door
while a cycle is in progress, press the START/PAUSE button ; if the symbol is
off, the door can be opened.
FIRST-TIME USE
Once the appliance has been installed, and before it is used for the first
time, run a wash cycle with detergent and no laundry, by setting the “Auto-
Clean” cycle.
DAILY USE
Prepare the laundry by following the suggestions appearing under the “TIPS AND
SUGGESTIONS” section.
Rapid programming
- Press the ON/OFF button ; the START/PAUSE indicator light flash slowly green.
- Open the door. Load the laundry while making sure not to exceed the maximum load quantity indicated in the cycle table.
- Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in “DETERGENT DISPENSER DRAWER” section.
- Close the door.
STARTING CYCLE
Press the PUSH & GO button.
The machine will lock the door ( symbol on) and the drum will start to rotate;
the door will be unlocked ( symbol off) and then locked again ( symbol on) as
preparation phase of each washing cycle. The “Clicking” noise is part of the
door locking mechanism. Water will enter the drum and start the washing phase
once the door is locked.
Traditional programming
- Press the ON/OFF button ; the START/PAUSE indicator light flash slowly green.
- Open the door. Load the laundry while making sure not to exceed the maximum load quantity indicated in the Wash Cycle Table.
- Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments as described in “DETERGENT DISPENSER DRAWER” section.
- Close the door.
- Use the WASH CYCLE selector knob to select the desired wash cycle: it will be associated with a specific temperature and spin speed that can be modified. The duration of the cycle will appear on the display.
- Modify the temperature and/or spin speed: the machine automatically displays the maximum temperature and spin speed values set for the selected cycle, or the most recently-used settings if they are compatible with the selected cycle. Pressing the C button gradually reduces the temperature down to the cold wash “OFF” setting. Pressing the button gradually reduces the spin speed until it is completely excluded (“OFF” setting). Pressing these buttons again restores the maximum values.
- Select the desired options.
STARTING CYCLE
Press the START/PAUSE button. The machine will lock the door ( symbol on) and
the drum will start to rotate; the door will be unlocked ( symbol off) and
then locked again ( symbol on) as preparation phase of each washing cycle. The
“Clicking” noise is part of the door locking mechanism. Water will enter the
drum and start the washing phase once the door is locked.
PAUSING A CYCLE
To pause the wash cycle, press the START/PAUSE button again; the indicator
light will flash amber. If the symbol is not lit, the door may be opened. To
start the wash cycle from the point at which it was interrupted, press the
START/PAUSE button again.
OPENING THE DOOR, IF NECESSARY
Once a cycle starts, the symbol turns on to signal that the door cannot be
opened. While a wash cycle is running, the door remains locked. To open the
door while a cycle is under way, for example, to add or remove garments, press
the START/PAUSE button to pause the cycle; the indicator light will flash
amber. If the symbol is not lit, the door may be opened. Press the START/PAUSE
button again to continue the cycle.
CHANGING A RUNNING WASH CYCLE
To change a wash cycle while it is in progress, pause the washer-dryer using
the START/PAUSE button (the relative indicator light will flash amber), then
select the desired cycle and press the START/PAUSE button again. ! To cancel a
cycle that has already begun, press and hold the ON/OFF button. The cycle will
be stopped and the machine will switch off.
END OF THE CYCLE
This will be indicated by the word “END” on the display; when the symbol
switches off, the door may be opened. Open the door, unload the laundry and
switch off the machine. If you do not press ON/OFF button, the washing machine
will switch off automatically after about a 10 minutes.
OPTIONS
- If the selected option is not compatible with the set wash cycle, the indicator light will flash and the option will not be activated.
Stain removal
This option allows for selecting the type of dirt so as to optimally adjust
the cycle for removing the stains. The following types of dirt can be
selected:
- Food, for stains caused by foodstuffs and beverages, for example.
- Work, for grease and ink stains, for example.
- Outdoor, for mud and grass stains, for example
- The wash cycle duration varies according to the type of selected dirt.
Delayed Start
To set a delayed start for the selected cycle, press the corresponding button
repeatedly until the desired delay period has been reached. When this option
has been activated, the symbol lights up on the display. To remove the delayed
start setting, press the button until the word “OFF” appears on the display.
Temperature
Each wash cycle has a pre-defined temperature. To modify the temperature,
press the button. The value will appear on the display.
Spin
Each wash cycle has a pre-defined spin speed. To modify the spin speed,
press the button. The value will appear on the display.
Setting the drying cycle
The first time the button is pressed, the machine will automatically select
the maximum drying cycle which is compatible with the selected wash cycle.
Subsequent presses will decrease the drying level and then the drying time,
until the cycle is excluded completely (“OFF”).
Drying may be set as follows:
- Based on the desired laundry dryness level:
- Cupboard : suitable for laundry which can be put back in a cupboard without being ironed.
- Hanger : ideal for clothes which do not need to be dried fully.
- Iron : suitable for clothes which will need ironing afterwards. the remaining dampness softens creases, making them easier to remove.
- Based on a set time period: between 210 and 30 minutes.
If your laundry load to be washed and dried is much greater than the maximum stated load (see adjacent table of wash cycles), perform the wash cycle, and when the cycle is complete, divide the garments into groups and put some of them back in the drum. At this point, follow the instructions provided for a “Drying only” cycle. Repeat this procedure for the remainder of the load. Note: a cooling-down period is always added to the end of each drying cycle.
Drying only
Press button to perform the drying-only cycle. After selecting the desired
cycle (compatible with the type of garments), press button to exclude the
washing phase and start the drying phase at the maximum level for the selected
cycle. The drying level or time may be set and changed by pressing the drying
button
.
(Not compatible with cycles 13 and 14).
PUSH & GO
To start the Push&Go cycle press and hold the button for 2 seconds. The
indicator lights up to show that the cycle has started. The wash and drying
cycle is ideal for cotton or synthetic fabrics, as it washes them at a
temperature of 30° and a maximum spin speed of 1000 rpm. During the drying
cycle the maximum temperature is 60°C. At the end of the cycle the residual
humidity will be the same as for the “ ” level. Max recommended load 3 kg.
The time displayed is the maximum time allowed by the Push&Go cycle. If the
load is lower than the maximum load or most garment are made of synthetic
materials, the actual time of the cycle will be shorter.
How does it work?
-
Load the laundry (cotton and/or synthetic garments) and close the door.
-
Pour the detergent and/or additives.
-
Start the cycle by pressing and holding the Push&Go button for 2 seconds. The relevant indicator light will turn green and the door will lock (the DOOR LOCKED symbol is lit).
NB: starting the cycle through the Push&Go button activates an automatic non-customisable wash and drying cycle recommended for cotton and synthetic fabrics. -
The automatic cycle can be used only for washing, excluding the drying phase. Press the Push&Go button and then the drying button : the drying icon of the “ ” level will switch off. Maximum load for washing-only is 4 kg. The cycle cannot be customised further. To open the door while an automatic cycle is under way, press the START/PAUSE button. If the DOOR LOCKED symbol is off, the door may be opened only during the washing phase. Press the START/PAUSE button again to restart the wash cycle from the point at which it was interrupted.
-
At the end of the wash cycle the word END will light up.
TIPS AND SUGGESTIONS
Divide the laundry according to:
Type of fabric (cotton, mixed fibres, synthetics, wool, garments to be hand-
washed). Colour (separate coloured garments from whites, wash new coloured
garments separately). Delicates (small garments – such as nylon stockings –
and items with hooks – such as bras: insert them in a fabric bag).
Empty the pockets:
Objects such as coins or lighters can damage the washer-dryer and the drum. Check all buttons.
Follow the dosage recommendation / additives
It optimizes the cleaning result, it avoids irritating residues of surplus
detergent in your laundry and it saves money by avoiding waste of surplus
detergent.
Use low temperature and longer duration
The most efficient programmes in terms of energy consumption are generally
those that perform at lower temperatures and longer duration.
Observe the load sizes
Load your washing machine up to the capacity indicated in the “Wash Cycle
Table” table to save water and energy.
Noise and remaining moisture content
They are influenced by the spinning speed: the higher the spinning speed in
the spinning phase, the higher the noise and the lower the remaining moisture
content.
CARE AND MAINTENANCE
Before performing cleaning and maintenance, switch the washer-dryer off and disconnect it from the mains power. Do not use flammable liquids to clean the washer-dryer. Clean and maintain your washer-dryer periodically (at least 4 times per year).
Disconnect the water and power supplies
Close the water tap after every wash. This will limit wear on the hydraulic
system inside the washer-dryer and help to prevent leaks. Unplug the washer-
dryer when cleaning it and during all maintenance work.
Clean the washer-dryer
The outer parts and rubber components of the appliance can be cleaned using a
soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.
The washer-dryer has a “Auto-clean” cycle for its internal parts; it must be
run without any load in the drum. To optimise this cycle, it is possible to
use either detergent (10% of the quantity specified for lightly soiled
garments) or special additives to clean the washer-dryer. We recommend running
a cleaning cycle every 40 wash cycles. To start the cycle press buttons
and
simultaneously for 5 seconds. The cycle will start automatically and will run
for about 70 minutes. To stop the cycle, press the START/PAUSE button.
Clean the detergent dispenser drawer
Wash it under running water; this operation should be repeated frequently.
Care for the door and drum
Always leave the porthole door ajar in order to prevent unpleasant odours from
forming.
Clean the pump
The washer-dryer is fitted with a auto-cleaning pump that does not require any
maintenance. Small items (such as coins or buttons) may sometimes fall into
the protective pre-chamber situated at the base of the pump.
Make sure the wash cycle has ended and unplug the appliance. To access the
pre-chamber:
- remove the cover panel on the front of the machine by first pressing it in the centre then pushing downwards on both sides to extract it;
- loosen the drainage pump cover by turning it anti-clockwise: it is normal for some water to leak out;
- clean the inside thoroughly;
- screw the cover back on;
- put the panel back in place, making sure the hooks slot in place before pushing the panel onto the appliance.
Check the water inlet hose
Check the water inlet hose at least once a year. If it is cracked or broken,
it must be replaced: during wash cycles, the high pressure of the water could
suddenly split the hose open.Never use hoses that have already been used.
LOAD BALANCING SYSTEM
Before every spin cycle, to avoid excessive vibrations before every spin
and to distribute the load in a uniform manner, the drum rotates continuously
at a speed which is slightly greater than the washing rotation speed. If,
after several attempts, the load is not balanced correctly, the machine spins
at a reduced spin speed. If the load is excessively unbalanced, the washer-
dryer performs the distribution process instead of spinning. To encourage
improved load distribution and balance, we recommend small and large garments
are mixed in the load.
ACCESSORIES
Contact our Technical Assistance Service to check whether the following
accessories are available for this washer-dryer model.
Stacking kit
With this accessory you can secure the tumble dryer to the upper part of your
washer-dryer to save space and facilitate loading and unloading of the tumble
dryer.
TRANSPORT AND HANDLING
Do not lift the washer-dryer by gripping it from the upper section. Unplug the
appliance and close the water tap. Check that the door and detergent dispenser
drawer are tightly closed. Detach the filling hose from the water tap then
detach the drain hose. Empty all the water remaining in the hoses and secure
the latter so that they do not get damaged during transport. Apply the
transport bolts back on. Repeat, in reverse order, the transport bolt removal
procedure described in the
“Health & Safety and Installation Guides”.
DEMO MODE: to deactivate this function, switch the washing machine OFF.
Than press and hold “Start/Pause” button, within 5 seconds press also “ON/OFF”
button and hold both buttons for 2 seconds.
TROUBLESHOOTING
Your machine could occasionally fail to work. Before contacting the Technical Assistance Service, make sure that the problem cannot be easily solved using the following list.
You can download the Safety Instructions, Product Fiche and Energy data by:
- Visiting our website – http://docs.indesit.eu
- Using QR Code
- Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales Service, please state the codes provided on your product’s identification plate.
- For User’s Repair & Maintenance Information visit www.indesit.com
The model information can be retrieved using the QR-Code reported in the energy label. The label also includes the model identifier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>