NEO TOOL 08-821 Tools Torque Wrench Set Instructions
- June 13, 2024
- NEO TOOL
Table of Contents
08-821 Tools Torque Wrench Set Instructions
ORIGINAL USER MANUAL
MECHANICAL TORQUE WRENCH
08-821, 08-835, 08-837, 08-845
WARNING
READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USING THE TORQUE WRENCH. IN CASE
OF ANY DOUBTS, PLEASE CONTACT THE MANUFACTURER TO AVOID SAFETY ACCIDENTS AND
TORQUE DAMAGE CAUSED BY INCORRECT HANDLING.
DESCRIPTION OF THE GRAPHIC SIDES
a) Torque wrench
b) Classic cap
c) Compression nut
d) Centerline
e) Main graduation
f) Additional graduation
g) Step reference line
h) Blockage
i) Step 1: Set to 60 Nm
j) Step 2: Set to 66 Nm
OPERATION / SETTINGS
-
Selection guide
Select the appropriate type of torque wrench and socket according to the torque required for the bolt or nut to be tightened. -
How to use – set the torque value
• Pull out the handle to unlock the extra scale
• Turn the additional scale to set the torque (combination of values on the main scale and the auxiliary scale)
Example: To set the torque to 66 Nm
• Rotate the additional scale to 60 Nm on the main scale near the reference line. Now the torque is set to 60Nm
•Turn clockwise until the 6 on the additional ruler is aligned with the center line. Now the torque is set to 66 Nm
• Place the cap over the tip of the bolt or nut.
• Turn the torque wrench clockwise to tighten the screw
• When you hear the sound, stop tightening the screw, the sound means that the screw is at the set torque value. -
Precautions for Use
• Make sure the torque wrench is properly set before use.
(Torque is set to Minimum Shipment Scale)
• Please visit a professional service center for regular functional and accuracy checks. Do not repair on your own.
• When storing a torque wrench for a long time, store the wrench with the torque scale set to the lowest setting, then apply stainless steel oil and store in a dry place
• To ensure the accuracy of the torque w rench, check it once a year or after 5,000 uses.
• It is forbidden to use a torque wrench as a hammer, use pliers to tighten the wrench or use the wrench in water. -
Torque conversion table
From| To| Multiply
---|---|---
cNm| in-lb| 0.0885
cNm| ft-lb| 0.00737
cNm| Nm| 0.01
Nm| in-lb| 8.85074
Nm| ft-lb| 0.73756
Nm| kg-cm| 10.1972
Nm| kg-m| 0.10197
Nm| cNm| 100
kg-cm| in-lb| 0.86796
kg-cm| ft-lb| 0.07233
kg-cm| Nm| 0.09806
kg-m| in-lb| 86.7961
kg-m| ft-lb| 7.23301
kg-m| Nm| 9.80665