TURTLE BEACH Recon 50X Gaming Headset User Guide
- June 13, 2024
- TURTLE BEACH
Table of Contents
TURTLE BEACH QUICK START GUIDE
IMPORTANT
READ BEFORE USING
Any Questions?
turtlebeach.com/Recon5OX
Package Contents
Recon 50X Headset Casque Recon 50X
Removable Mic Boom
Microphone amovible
In-Line Controls
Xbox One Setup
Note : The Recon 50X requires the NEW Xbox One Controller I with 3.5mm
headset jack). Purchase the Ear Force Headset Audio Controller from
turRebeach.com for use with the original Xbox One
Controller.
For detailed setup instructions visit:
turtlebeach.com/Recon5OX
PC/Mac & Mobile Setup
Configuration PC/Mac & Mobile
Note: If your PC uses separate Green/Pink connectors for audio you will
need a PC Splitter Cable. This adapter is available online at
turtlebeach.com
PS4™ Setup
Configuration PS4™
- Go to Settings >, Devices »Audio Devices
- Select Headset Connected to Controller for Input & Output Device
- Set Output to Headphones to Alt Audio
- Set Volume Control [Headphones] level to maximum
- Select Adjust Microphone Level and follow the on-screen instructions to calibrate your microphone
Regulatory Compliance Statements for the EAR FORCE Recon 50 Model Federal
Communications Commission (FCC) Compliance Notices
Class B Interference Statement This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15,
Subpart B of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution,
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: 111 This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Canadian ICES
Statements Canadian Department of Communications Radio Interference
Regulations This digital apparatus does not exceed the Class B limits for
radio-noise emissions from a digital apparatus as set out in the Radio
Interference Regulations of the Canadian Department of Communications. This
Class B digital apparatus complies with Canadian ICES-003. NMB-003 du Canada.
Declaration of Conformity Additional licenses issued for specific countries
available on request Emissions, Marking by this symbol: EN 55022: 2010, CISPR
22: 2008 Immunity: EN 55024: 2010. CISPR 24: 2010 EN 61000-4-2:120091, EN
61000-4-3: (20101, EN 61000-4-8:12010) The products are licensed, as required,
for additional country specific standards for the International Marketplace.
Additional issued licenses available upon request. Environmental: Low Voltage
Directive 2006/95/EC. RoHS 2011/65/EU. REACH 2006/1907/EC, WEEE 2012/19/EU,
Packaging 94/62/EC, Toys Safety Directive 2009/48/EC
Indicates compliance with the Essential Requirements of the EMC Directive of
the European Union (2004/108/ECI. This equipment meets the following
conformance standards: Safety’ EN 60950-1: 2006 + All: 2009 + Al: 2010 + Al2:
2011 IT-Mark License) IEC 60950-1: 2005 (2nd Edition) + Am 1: 2009 (CB Scheme
Report/Certificate. EN 50332-1: 2000, EN 50332-2: 2003, EN 71-3: 2013 Also
Licensed for Standards: UL 60950-1: 2007 R12.11, CAN/CSA-C22.2 No. 60950-1-07
- Al: 2011
This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.
Please visit the following URL for a complete copy of the declaration of conformity: http://www.turtlebeach.com/homotogation
Declaration of Conformity
Marking by this symbol: **
Indicates compliance with the Essential Requirements of the EMC Directive of the European Union 12004/108/ECI. This equipment meets the following conformance standards:
Safety:
EN 60950-1: 2006 + All: 2009 + Al: 2010 + Al2: 2011 (T-Mark License) IEC 60950-1:2005 (2nd Edition). Am 1:2009 (CB Scheme Report/Certificate.
EN 50332-1: 2000, EN 50332-2: 2003, EN 71-3: 2013 Also Licensed for Standards: UL 60950-1: 2007 R12.11, CAN/CSA-C22.2 No. 60950-1-07 + AI: 2011
Additional licenses issued for specific countries available on request
Emissions:
EN 55022: 2010, CISPR 22: 2008
Immunity:
EN 55024: 2010. CISPR 24: 2010
EN 61000-4-2:120091, EN 61000-4-3:120101, EN 61000-4-8:2010
The products are licensed, as required, for additional country specific standards for the International Marketplace. Additional issued licenses available upon request.
Environmental:**
Low Voltage Directive 2006/95/EC, RoHS 2011/65/EU. REACH 2006/1907/EC, WEEE 2012/19/EU. Packaging 94/62/EC, Toys Safety Directive 2009/48/EC
This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste.
Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.
Please visit the following URL for a complete copy of the declaration of conformity: http://www.turtlebeach.com/homotogation