TOPDON PulseQ AV EV Charger User Guide
- June 13, 2024
- TOPDON
Table of Contents
TOPDON PulseQ AV EV Charger
Section 1-Hardwire Installation
- Get yourself an professional electrician to install the PulseQ for you.
- Please strickly follow the installation steps and warnings on the User Manual.
Please follow the instructions below to finish the installation.
The installation steps of the charging dock is the same as the steps of
installing the charging station, or you can refer to the user manual.|
Note: To activate/deactivate the Plug and Play charging mode, touch the
supplied charging card on the charger for 10 seconds(until a beep sound is
heard).
Section 2-LED Indicators
No.| Icon| Indicator Color| Indicator Status|
Connotation
---|---|---|---|---
l
| |
Green
|
ON
|
Standby status
Twinkle
|
Ground fault status
2
| |
Green
|
ON
|
Connected to an EV
BLN control
|
Charging status
3
| !|
Red
|
Twinkle
|
Fault status
Twinkle frequency indicates the fault code
4
|
|
Blue
|
OFF
|
Unconnected network
ON
ON
|
Connected to the network
Exchange data with CMS via
network.
Twinkle
|
Configure WiFi network status
Section 3-Wi-Fi Configuration
- To configure the Wi-Fi, please download the PulseQ application from the APP Store and Google Play and install the app to your phone. (See Fig. 3.1)
- Register an account with your email address and login.(See Fig. 3.2)
- Open the app and tap the User Center, select the charging station management. (See Fig. 3.3)
- Tap the cross at the bottom right to add your charging station. (See Fig. 3.4)
- Select the Wi-Fi network. (See Fig. 3.5)
- Tap the TOP DON-AC Home to connect the hotspot. (See Fig. 3.6)
- Tap the Wi-Fi Setting, enter the Wi-Fi name and password to set up the connection. (See Fig. 3.7)
- Once the above steps have been done, tap the Confirm to complete the procedure. (See Fig. 3.8)
For Services and Support
- TEL 86-755-21612590
- EMAIL [email protected]
- WEBSITE WWW.TOPDON.COM
- FACEBOOK @TOPDONOFFICIAL
- TWITTER @TOPDONOFFICIAL