ANKER A2671 67W 316 Charger User Manual
- June 13, 2024
- Anker
Table of Contents
ANKER A2671 67W 316 Charger
Attention
Read all the instructions before using the product.
- The product is designed for use with IT equipment only.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by an AC plug.
- In case of broken plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
- For the fastest and safest charge, use an Anker® cable, your device’s original cable, or another certified cable (such as MFi).
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC.
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 (800) 988 79733 This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB- 003(B).
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance
with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC &
2019/1782/EU. The full text of the EU Declaration of Conformity is available
at the following internet address: https://www.anker.com. Hereby, Anker
Innovations Limited declares that this product is in compliance with
Electrical Equipment (Safety) Regulations 2016 & Electromagnetic Compatibility
Regulations 2016 & The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012 & The Ecodesign for
Energy-Related Products Regulations 2010. The full text of the GB declaration
of conformity is available at the following internet address:
https://www.anker.com.
- Indoor use only
- This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Anker Innovations Limited
- Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,
- Kowloon, Hong Kong
- The following importer is the responsible party (contract for EU and UK matters)
- Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3,
- 80807 Munich, Germany
- Anker Technology (UK) Limited | GNR8, 49 Clarendon Road,
- Watford, Hertfordshire, WD17 1HP, United Kingdom
Specifications
- Input: 100-240V~ 2.0A 50/60Hz
- Output: 5V 3A/9V 3A/12V 3A/15V 3A/20V 3.35A
- Average Active Efficiency: 82.7%
- Efficiency at Low Load (10%): 69.09%
- No-Load Power Consumption: 0.125W
- Recommended Operating Temperature: 0-25℃ / 32-77 ℉
Note: To ensure electrical safety and product performance, the output
power may fluctuate based on the ActiveShield™* safety mechanism when the
ambient temperature is between 26-35°C (78.8-95°F) with a high output load.
ActiveShield™ enhances protection by intelligently monitoring temperature and
adjusting power output to safeguard your connected devices.
Customer Service
- 18-month limited warranty *
- Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
- Lifetime technical support
- support@anker.com
- support.mea@anker.com (For Middle East and Africa Only
- (US/CA) +1 (800)988 7973
- (UK) +44 (0) 1604 936200
- (DE) +49 (0) 69 9579 7960
- (Middle East & Africa) +971 42428633
- (UAE) +971 8000320817
- (KSA) +966 8008500030
- (Kuwait) +965 22069086
- (Egypt) +20 8000000826
- (AU) +61 3 8331 4800
- (TR) +90 0850 460 14 14
- (RU) +8 (800) 511-86-23
For tutorial videos, FAQs, manuals, and more information, please visit
-
Or scan the QR code below:
-
@anker_o cial @anker_jp
-
@AnkerDeutschland @AnkerJapan @Anker
-
@AnkerO cial @Anker_JP
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>