Apps Star Eye App for IT Camera User Manual

Apps Star Eye App for IT Camera

Product Information

The IT Camera is a wireless camera that allows users to monitor their surroundings remotely. It can connect to a WiFi network and be controlled through a mobile app.

Equipment Description

• Before downloading the app, ensure all necessary permissions are granted.
• Factory settings should be restored before configuring the network for the camera.
• Plug in and turn on the camera before setting it up. Place it near the router with a strong WiFi signal.
• The camera only supports the 2.4GHz WiFi band.

Product Usage Instructions

1. Tap the “Start configure wifi” button in the app.
2. Connect to the WiFi network named “AYS-xxx” or “XYX-xxx”, which represents the camera hotspot.
3. Return to the app after successfully connecting to the camera.
4. If using an Android system, ignore any warning windows about Internet availability. Maintain the current network connection.
5. If using an IDS system, ignore any warning windows about an unsecured Internet connection. Maintain the current network connection.
6. Click the “Configure wifi” button to proceed.
7. Select the 2.4GHz WiFi network and enter its password, then tap the “Next step” button.
8. Click the “Join” button to configure the device network. After the configuration is complete, you will be redirected to the home page of the app.
9. Follow the prompt tones for various camera status indications.
10. To reset the camera, power it on and press and hold the reset key.
11. Before pairing the camera, ensure your phone is connected to a 2.4GHz WiFi network.
12. Tap the “+” button in the app.
13. Select “QR code connection” and choose the corresponding camera type.
14. Enter your email address and tap the “Verification” button. Retrieve the verification code from your email and input it.
15. Confirm that the red light on the camera is flashing, then tap the “Next step” button.
16. Select the 2.4GHz WiFi network and enter its password, then tap the “Next step” button.
17. Maintain a suitable distance from the camera to scan the code and wait for the prompt.
18. After hearing four beeps, the connection is successfully established.

Equipment Description

1. When downloading the app, all the rights reminded should be opened.
2. Before configuring the network for the new camera, please restore the factory settings.
3. Before setting the camera, please plug in and turn it on, and set it within the range close to the router with strong WiFi signal. I (The wifi band only supports 2.4HZ)

Indicator Status

Prompt tone Description

Four continuous prompt

tones

| Camera network connection

succeeded

Five continuous prompt

tones

| Camera upgrade successfully
Six continuous prompt tones

I

| Camera low power

APP d ownload and reg1strat1on

1. Please search “star eye” in the mobile app store to download the app, or scan the QR code to select the corresponding system of the mobile phone to download.
2. Enter your email address, next tap “Verification” button, next go to your email to get the code and input it for verification.
   • NOTE: Verify code email may be classified as spam by the mailbox, please check out the spam box. Please allow all tips when you launch the app for the first time. Otherwise the App may not work correctly.

Add your camera (AP mode)

1. Launch your app, and tap “+” button to add your camera.
2. Tap “AP mode” button.
3. Select the corresponding camera type.
4. Confirm that the status of the indicator light is blue light off, red light flashing, next tap “Next step” button.
5. Tap “Start configure wifi” button, then connect to WiFi name starting with “AYS-xxx” or “XYX-xxx”, which is your camera hotspot. Then you can return back to App page, next you add camera successfully. After the connection is done, return to the App. NOTE: If you use Android system, a warning window may pop up saying “Internet unavailable”. Ignore the message and keep on current network connection. If you use IDS system, a warning window may pop up saying “Unsecured Internet”. Ignore the message and keep on current network connection
6. Please click the “Configure wifi” button to enter the next step.
7. Select 2.4GHz WiFi network and input password, next tap “Next step” button.
8. Clickthe “Join” button to enter the device configuration network, and jump to the home page after the network configuration is done.
9. 

QR Code Conne

Power on the device, then press and hold the reset key to reset the device. Please connect your phone to a 2.4GHz WiFi network firstly before you pair the camera.

1. Tap “+” button.
2. Select “QR code connection”.
3. Select the corresponding camera type.
4. Next tap “Confirm that the red light is flashing”, next to “Next step” button.
5. Select 2.4GHz WiFi network and input password, next tap “Next step” button. It’s important to know that your phone must be connected to the same WiFi network as the camera during setup.
6. The camera maintains a suitable distance to scan the code to connect and wait for the prompt After four beeps, the connection is completed successfully.

Share device

Your friend has to download the “Star Eye”App, then launch the app with an email. You open your App and tap•• button, then tap “Share device” button, then tap “Add friend”, then enter your friend’s registered email, then click ” Add” button, then your friend’sApp will add the camera automatically.

FCC

FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>