Shark Rocket DeluxePro Ultra-Light Upright Corded Stick Vacuum Cleaner User Guide

Shark Rocket DeluxePro Ultra-Light Upright Corded Stick Vacuum Cleaner

Product Information

• A Handheld Vacuum
• B Motorized Floor Nozzle
• C Wand
• D Onboard Tool Clip
• E 12″ Crevice Tool
• F Dusting Brush
• G Upholstery Tool
• H Dust-AwayTM Hard Floor Attachment with Pad
• I Wall Mount

Assembly| Two storage options are available:
| Option 1: Onboard Hook – Hang the handheld vacuum on the hook
on the bottom of the wand and wrap the power cord around the cord
hooks. The unit can be stored easily in a closet or along a
wall.
| Option 2: Wall Mount – Follow the instructions provided in the
included an instruction sheet for wall mount installation.
Maintenance|

• Empty the dust cup every time debris reaches the MAX fill
  line.

• Wash filters every month to maintain strong suction. Rinse
  filters and allow them to air-dry completely. Tap loose dirt from
  foam filters as needed between washes.

• For brushroll maintenance, remove any string, carpet fibers, or
  hair wrapped around the brushroll. Loosen debris by cutting across
  the groove on the brushroll with a pair of scissors.

Product Usage Instructions

Floor Cleaning

1. Plug in the vacuum.
2. Place your foot gently on the floor nozzle and tilt the handle back to stand the vacuum upright.
3. To disconnect the wand from the motorized floor nozzle, step on the foot pedal and pull the wand up. Alternatively, press the Wand Release button on the top of the wand to disconnect it from the handheld vacuum.
4. Choose the desired setting:
   • Setting I: Gentle on bare floors and delicate area rugs. The brushroll spins slowly to clean bare floors and delicate area rugs.
   • Setting II: Deep cleans carpets by removing embedded dirt. The brushroll spins faster to pick up debris below the surface of your carpets.

Above-Floor Cleaning

1. Attach the desired cleaning accessory.
2. Use Setting I for all above-floor accessories.

For deep cleaning per ASTM F 608 (embedded dirt in carpet), please use Setting II (high pile carpet mode).

For questions or to register your product, contact us at 1-800-798-7398 or visit us online at @sharkcleaning.

WHAT’S INSIDE

• A Handheld Vacuum
• B Motorized Floor Nozzle
• C Wand
• D Onboard Tool Clip
• E 12˝ Crevice Tool
• F Dusting Brush
• G Upholstery Tool
• H Dust-Away™ Hard Floor Attachment with Pad
• I Wall Mount

ASSEMBLY

STORAGE

Option 1: Onboard Hook
For compact, convenient storage, hang the handheld vacuum on the hook on the bottom of the wand, and wrap the power cord around the cord hooks. The unit stores easily in a closet or along a wall.

Option 2: Wall Mount
Please see included instruction sheet for wall mount installation information.

MAINTENANCE

• Empty the dust cup every time debris reaches the MAX fill line.

TIP

• Wash filters every month to keep the suction strong.
• Rinse filters and allow to air-dry completely.
• Tap loose dirt from foam filters as needed between washes.

Brushroll Maintenance

• A portion of the base is removable to allow for better access to the brushroll and exposure to the airway. Remove any string, carpet fibers, or hair that may be wrapped around the brushroll. Loosen debris by cutting across the groove on the brushroll with a pair of scissors.

VERSATILE FLOOR-TO-CEILING CLEANING

FLOOR CLEANING

Plug In Vacuum

• Then place your foot gently on the floor nozzle and tilt the handle back.

Choose Setting

• The Rocket® Deluxe Pro has a 2-speed power slider switch on the handle. Slide the power switch to the appropriate floor setting and start cleaning.

Setting I
Gentle on bare floors and delicate area rugs.
The brushroll spins slowly to clean bare floors and delicate area rugs.

Setting II
Deep cleans carpets by removing embedded dirt.
The brushroll spins faster to pick up debris below the surface of your carpets.

NOTE
For deep cleaning per ASTM F 608 (embedded dirt in carpet) please use Setting II, high pile carpet mode.

ABOVE-FLOOR CLEANING

1. Stand the vacuum upright. Step on the foot pedal and pull the wand up to disconnect it from the motorized floor nozzle.
   OR
   Press the Wand Release button on the top of the wand to disconnect it from the handheld vacuum.

2. Attach desired cleaning accessory.

NOTE: Use Setting I for all above-floor accessories.

• For questions or to register your product, contact us at 1-800-798-7398 or visit us online at sharkclean.com.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>