Razor W25143499049 Crazy Cart Instruction Manual
- June 13, 2024
- Razor
Table of Contents
Razor W25143499049 Crazy Cart
Product Information
- Product Name: Crazy Cart
- Model Number: W25143499049 / W25143499012
- Tools Required (Not included):
- A Phillips screwdriver
- Two (2) 16 mm wrenches
Product Usage Instructions
WARNING: Before removing or installing the front wheel/chain, make sure to turn off the power switch and disconnect the charger to avoid potential shock or injury. Failure to follow these steps in the correct order may cause irreparable damage.
WARNING
CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect charger before removing or installing the front wheel/chain. Failure to follow these steps in the correct order may cause irreparable damage.
Instalation
Step 1
Using a Phillips screwdriver, loosen the eight (8) screws on the motor
cover, four (4) on each side, and remove.
Step 2
Loosen the three (3) Phillips screws on the chain guard and
remove.
Step 3
Carefully turn the unit over and using two (2) 16 mm wrenches, remove both
locknuts on the front axle bolt (Figure 3a) then remove the axle bolt (Figure
3b).
Step 4
Carefully remove the chain from around the wheel sprocket (Figure 4a) and
remove wheel from the front fork. If replacing the chain, also remove the
chain from around the motor shaft (Figure 4b). Install replacement
wheel/chain.
Step 5
Reverse steps 1 through 4 to install a replacement wheel/chain. Refer to
pg. 6 in the Owner’s Manual for front wheel hardware sequence
ATTENTION: Charge the battery 12 hours before initial use.
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday – Friday 8:00 AM – 5:00 PM PST.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>