Cobra SC 200D Dash Cam Rear Cam User Manual
- June 13, 2024
- Cobra
Table of Contents
Cobra SC 200D Dash Cam Rear Cam
Product Information
The SC 200D is a dash cam designed to capture video recordings while driving. It features a front-view camera with a lens, a 3-inch LCD display, and a rear- view camera (optional accessory). The dash cam comes with an adhesive mount for easy installation on the windshield. It also includes a GPS attachment for location tracking.
FEATURE
HOW TO USE
- Attach GPS mount and remove protective 1 film from mount and front lens.
- Attach Camera Assembly to Windshield.
- Connect and Power.
For Cabin View
Connect Cabin Camera to the Video Input Port on the SC 200
For a View of the Road Behind You
- Connect Extension Cable to the Video Input Port on the Dash Cam
- Connect Extension Cable to the Rear Camera
- Attach Rear Camera to the Vehicle’s Back Window
Warning: Please position the camera on the rear windshield so it faces out of the vehicle in the orientation shown.
Voice Commands
SC200 will respond to certain voice commands so you can stay focused on the
road ahead. Try the following voice commands.
Button Functions
Button Functions (Recording Stopped):
- Settings Button: Access the dash cam’s Settings menu.
- Takes a snapshot and stores it in the Photo Folder.
- Enters the playback menu to review previous recordings and photos.
- Begins loop recording.
Button Functions (While Recording):
- When pressed the camera saves the current clip from being overwritten.
- Takes a snapshot and stores it in the Photo Folder.
- Toggles the microphone on/off. Note that the icon on the button indicates the action that will be taken when the button is pushed, not the current setting. The current setting is shown on the status bar at the top of the screen.
- Stops loop recording. While in an Emergency Recording, you will be asked to confirm.
THANK YOU!
For purchasing the new COBRA® SC 200D
View, edit and share from your smartphone or desktop. Share & receive real-
time driver alerts. Download today!
drivesmarter.com/downloads
Full manual available at: www.cobra.com
FCC ID: BBOSC200, IC:906A-SC200. THIS DEVICE COMPLIES WITH PART 15 OF THE
FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS
DEVICE MAY NOT CAUSE HARMFUL INTEFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
FCC NOTE: Modifications not expressly approved by the manufacturer could
void the user’s FCC-granted authority to operate the equipment.
Cobra® and the snake design are registered trademarks of Cobra Electronics
Corporation, USA. Cobra Electronics Corporation™ is a trademark of Cobra
Electronics Corporation, USA. Other trademarks and trade names are those of
their respective owners.