NVX BE-TOYCOR-G11 Bass Enclosure for the Toyota Corolla Installation Guide
- June 13, 2024
- NVX
Table of Contents
NVX BE-TOYCOR-G11 Bass Enclosure for the Toyota Corolla Installation Guide
BE-TOYCOR-G11 B.O.O.S.T. Series
Bass Enclosure for the 2014-2018 Toyota Corolla
Included in the box:
1x BOOST enclosure
4x M6-1.0 Nuts
7x M6 Washers
2x M6-1.0 40mm Bolts
1x M6-1.0 20mm Bolt
1x Bracket
We recommend the installation of the NVX BETOYCOR- G11 to be performed by a professional that will have the skills and tools to ensure the job is done correctly. Please follow the steps above to get the best performance out of the NVX BE-TOYCOR-G11. Installing and mounting NVX BETOYCOR- G11 improperly can present a serious safety hazard in the event of a collision. If you have any questions regarding installation of this product or an amplifier in this vehicle please feel free to contact NVX directly for further guidance and installation techniques.
The BOOST subwoofer enclosures are internally wired for a 2 ohm load at the speaker-wire connection terminal. Check to see if your amplifier is optimized to drive this load. The BOOST enclosures feature a NVX VSW 10″ subwoofer and are custom made for optimal performance in a ready-to-install subwoofer system.
Read More About This Manual & Download PDF: