Lucci 030677 North 1Light Small Pendant Light Instruction Manual

Lucci 030677 North 1Light Small Pendant Light

Product Information

• Product Name: NORTH 1LT SMALL PENDANT
• SKU#: 030677, 039370
• Colour: Textured Black, Textured Chalk
• Rated Voltage: 220-240V~ 50Hz
• Rated Wattage: Max. 45W
• Lamp Holder: ES / E27
• Weight: 2.6kg
• Canopy Dimensions: H:25mm L:120mm W:120mm
• Luminaire Dimensions: H:300mm L:250mm W:250mm Susp:1800mm

Product Usage Instructions

1. Remove all packaging material from the product and make sure not to discard any hidden accessories.
2. If assembly is required, place the luminaire on a smooth non-scratch surface.
3. Detach the mounting bracket (B) from the canopy (G) by loosening the nuts (H).
4. Use the mounting bracket (B) as a template to mark the screw hole positions on the ceiling.
5. Install the mounting bracket (B) onto the ceiling using appropriate mounting screws (D), washers (C), and anchors (A). Ensure they are suitable for the mounting surface and environment.
6. Determine the suspension length needed for your installation location. Attach the required lengths of suspension rod (I & J) to the luminaire body. Install the canopy (G) on top of the suspension rod.
7. Add the cord restrainer (F) to the luminaire wire.
8. Connect the luminaire wires and the mains supply wire to the terminal block (E). Ensure the wires are secure and no bare wires are exposed. This luminaire is a Class I product and must be earthed during wiring and installation.
9. Reinstall the canopy (G) onto the mounting bracket (B) and tighten the nuts (H).
10. Install a globe (M – not included) into the lamp holder (K). Do not exceed the maximum wattage rating.
11. After installation, switch on the luminaire to test and enjoy your new lighting product.

Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation, and use of this luminaire. Please keep instructions for future reference.

Warranty

• This luminaire is covered by a 12-month warranty. The warranty is from the date of purchase, not the date of installation.
• If the luminaire is not assembled and installed by a licensed electrician, the warranty will be void.
• Please retain the proof of purchase and evidence of installation by a licensed electrician for any warranty enquiries.
• Warranty will be void if there is any damage due to improper usage or modification to the luminaire.
• Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the warranty.

Installation Requirements

• This luminaire must be assembled and installed by a licensed electrician.

• All wiring and installation of the luminaire must adhere to the latest local and national wiring rules.
  E. g. AS/NZS 3000 Electrical Installations.

• This luminaire is a Class I product and must be earthed during wiring and installation.

• Do not exceed the maximum wattage rating.

• Select a suitable location for installation:

  • This luminaire is suitable for indoor use only.
  • The mounting point must support 2 times the weight of the luminaire.
  • Ensure the luminaire is not installed in the direct line of an air vent/system.
  • If installing a luminaire in an area prone to moisture, ensure that the area is well ventilated, and an appropriately rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product fault, and as such is not covered under warranty.

• Take care not to pull any electrical wires during unpacking as this may damage the connection.

• Lay out all the components on a smooth surface and make sure no components are missing before assembling.

• If parts are missing, return the complete product to the place of purchase for inspection or replacement.

• Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.

• Ensure power to the circuit you are working on has been switched OFF before commencing any electrical work.

Installation Directions

1. Remove all packaging material from the product and be careful not to throw away accessories that may be hidden within the packaging material. If assembly is required, place the luminaire on a smooth non-scratch surface.

2. Remove the mounting bracket (B) from the canopy (G) by loosening the nuts (H) at the front.

3. Use the mounting bracket (B) as a template to mark the screw hole positions on the ceiling.

4. Install the mounting bracket (B) onto the ceiling by using appropriately sized mounting screws (D), washers (C) and anchors (A). Ensure the screws (D), washers (C) and anchors (A) used are suitable for the mounting surface and the surrounding environment.

5. Determine the suspension length required for your installation location. Install the required lengths of suspension rod (I & J) onto the luminaire body. Install the canopy (G) to the top of the suspension rod.
   NOTE: Take care not to cross-thread or twist and damage the luminaire wires during assembly.
   Pull the luminaire wires out as you assemble.
   Check the luminaire wires after every three turns when installing the suspension rod (I&J) onto the luminaire body. Relieve any twist in the cord by turning it anti-clockwise.

6. Add the cord restrainer (F) to the luminaire wire.

7. Connect the luminaire wires and the mains supply wire to the terminal block (E).
   Mains Supply Wire
   Earth – Yellow/Green
   Neutral – Blue or Black
   Live – Brown or Red
   Luminaire Wire / Terminal block
   Yellow/Green or
   Blue or N
   Brown or L
   NOTE : Ensure the wires are secure, and no bare wires are exposed.
   NOTE : This luminaire is a Class I product and must be earthed during wiring and installation.
   NOTE : Ensure the earth wires from the mounting bracket (B) and the canopy (G) are connected to the earth terminal block (E).

8. Install the canopy (G) back onto the mounting bracket (B) and secure it by tightening the nuts (H).

9. Install a globe (M – not included) into the lamp holder (K). Do not exceed the maximum wattage rating.

10. After the installation, switch on the luminaire to test and enjoy your new lighting product.

Safety Tips

• Always ensure the power is OFF and the luminaire has cooled down before performing any maintenance, cleaning, changing the globe or making any adjustment to the luminaire.
• To avoid injury or damage to the luminaire, ensure that power leads and screws are secure before connecting the power.
• Select a suitable location away from liquids and hazards.
• To clean, wipe with a soft damp cloth. Do NOT soak or immerse the luminaire in water or other liquids.
• Ensure that the luminaire does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.

Specifications

SKU #

|

030677

|

039370

Colour| Textured Black| Textured Chalk
Rated Voltage| 220-240V~ 50Hz
Rated Wattage| Max. 45W
Lamp Holder| ES / E27
Weight| 2.6kg

Canopy Dimensions

|

H:25mm    L:120mm    W:120mm

Luminaire Dimensions| H:300mm    L:250mm    W:250mm    Susp:1800mm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>