JBL WAVE 100TWS True Wireless In-Ear Headphone User Guide

quick start guide BC
WAVE100tws

WHAT’S IN THE BOX

HOW TO WEAR

1. Try different sizes of eartips for best fit and seal.

FIRST TIME USE

POWER ON & CONNECT

DUAL CONNECT

BUTTON COMMAND

power off

Manual Controls

Connect to a new Bluetooth device

RECONNECT LEFT & RIGHT

RESET

Charging

LEB BEHAVIORS

TECH SPEC

Model:
Driver Size:
Power supply:
Weight:
Earpiece:
Charging case:
Headset battery type:
Charging case battery type:
Charging time:
Music playtime with BT on:
Frequency Response:
Impedance:
Sensitivity:
Maximum SPL:
Microphone sensitivity:
Bluetooth version:
Bluetooth profile version:
Bluetooth transmitter frequency range:
Bluetooth transmitter power:
Bluetooth transmitter modulation:
Maximum operation temperature:| WAVE100TWS
8 mm / 0.31” Dynamic Driver
5 V 1 A
46.3 g / 0.102 lbs
5.1 g / 0.011 lbs (10.2 g / 0.022 lbs combined )
36.1 g / 0.08 lbs
Lithium-ion Battery (45 mAh / 3.7 V)
Lithium-ion Battery (550 mAh / 3.7 V)
2 hrs from empty
up to 5 hrs
20 Hz – 20 kHz
16 ohm
105.5
dB SPL@1kHz
94 dB
-11.3 dBV@1 kHz / Pa
5.0
A2DP V1.3 AVRCP V1.6 HFP V1.7
2.4 – 2.4835 GHz
< 10 dBm
GFSK, π/4-DQPSK, 8-DPSK
45°C
---|---

TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.

IC RF Exposure Information and Statement

The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLV100TWS) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.59W/kg.The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user›s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

Head operation

The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user›s ear and the product  including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.

IC: 6132A-JBLV100TWS

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license.
Other trademarks and trade names are those of their respective owners.

HP_JBL_WAVE100TWS_QSG_Global_SOP_V12

Documents / Resources

| JBL WAVE 100TWS True Wireless In-Ear Headphone [pdf] User Guide
WAVE100TWS, WAVE 100TWS True Wireless In-Ear Headphone, WAVE 100TWS, True Wireless In-Ear Headphone, Wireless In-Ear Headphone, In-Ear Headphone, Headphone
---|---

References

• Anatel — Agência Nacional de Telecomunicações

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>