HOMCOM 824-065V70 Oscillating Tower Fan Instruction Manual
- June 13, 2024
- HOMCOM
Table of Contents
IN221000632V01_UK
824-065V70
Instruction Manual
824-065V70 Oscillating Tower Fan
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Dear customer,
Thank you for purchasing this product. So that your appliance serves you well,
please read all the instructions in this user’s manual. If you have any
questions, please contact our customer care center, Our contact details are
below:
Country | Phone | |
---|---|---|
us | 001-877-644-9366 |
customerservice@aosom.com
CA| 416-792-6088|
customerservice@aosom.ca
UK| 0044-800-240-4004|
enquiries@mhstar.co.uk
IMPORTANT SAFETY INSTRUCTIONS
When using electric devices, basic safety precautions must be observed. To
avoid the risk of burns, electric shocks, fire, and/or personal injury, please
read the instruction manual carefully before using the device, and observe all
of the instructions during the operation of the device.
GENERAL GUIDELINES
- Electronic devices are not toys! Keep children away from the device!
- Only use the devices for its intended purpose.
- The device is only suitable for use in private households and not for commercial use.
- Do not leave the device unsupervised while in use or connected to the mains.
- Switch off the device if it is not in use, in the event of malfunctions and for cleaning, and also remove the power plug.
- Do not carry the device by the power cord.
- Keep the device clean and dust-free.
- Never use the device outdoors.
- Check the device regularly for signs of visible damage. Do not use the device if you have determined damage, if the device has fallen down or if it does not function properly. Do not attempt to repair the device yourself.
- Repairs are only allowed to be carried out by qualified specialists.
- The power point must be located near to the device so that the plug can be removed easily in an emergency.
HAZARDS DUE TO ELECTRIC CURRENT
- The voltage stated on the name plate of the device must agree with the voltage of your mains electricity network.
- Only connect the device to a power socket that has been installed properly. Do not use a power strip or an extension cable.
- Never operate the device using a timer or another remote contract device.
- Never touch the device, the power cable and the plug with damp or wet hands or if you are standing on wet ground.
- Do not place the power cord in the sink.
- Do not immerse in water.
- Immersing the device in water or other fluids leads to a risk to life of electric shock!
- Keep the device, the power cable and plug away from hot surfaces, naked flames, direct sunlight and sharp edges.
- When using the device make sure that the cable is not jammed (e.g. in doors).
- When you pull the plug out of the power socket, always pull on the plug and never on the cable.
- If the power cable of this device is damaged it has to be replaced by a correspondingly qualified person to prevent hazards. The same applies to the plug.
HAZARDS TO PEOPLE
- These devices can be used by children aged 8 years and above and by people with reduced physical, sensory or mental capabilities or a lack of experience and/or knowledge, if they are supervised or instructed in the safe use of the product and understand the hazards involved.
- Children must not play with the appliance.
- Cleaning and maintenance of the product must not be performed by children.
- Children do not recognize the hazards which can arise when handling electrical devices. Keep children away from the device. Pay particular attention when using the device if children are in the vicinity!
- Keep the packaging materials such as plastic bags and polystyrene parts out of the reach of children. Danger of suffocation!
- When laying the cable make sure that it cannot become a tripping hazard.
- Make sure that the device itself cannot be tripped over.
ARTICLE-SPECIFIC HAZARDS
- Make sure that the device isn’t dirty and that it is assembled correctly
- Never operate the appliance on uneven surfaces or in the vicinity of steps. Avoid tipping the device over when it is in use (e.g. if there are borders on the floor).
- The pedestal fan may only be used, if it is fully assembled. Check all screw / plug connections at regular intervals. Re- tighten loose screws and ensure that plug connections are properly adjusted.
OVERVIEW OF APPLIANCE
- Remote Control
- Body
- Power Plug
- Base
- Screws
- Timer
- Speed
- Mode
- Oscillation
- ON/OFF
ASSEMBLING THE STAND
- Take all of the appliance parts out of the packaging and remove all packaging materials and inserts.
- Take the bases (4) in 2pcs, and make the power plug (3) to cross it. See the_Fig.1
- Fixed the based (4) in 2pcs together, and tighten by the fixed screw (5), see the Fig.2
HANDLING THE APPLIANCE
POWER
- Press the button of ON/OFF (10), to select power on / off the appliance:
SPEED
- Press the button of ON/OFF (10), to power on the appliance.
- Press the button of Speed (7), to select the fan speed 3 ‘speed for select: (Low – Mid – High)
MODE
- Press the button of ON/OFF (10), to power on the appliance.
- Press the button of MODE (8), to select the fan mode. 3 mode for select: (NORMAL / NATURE / SLEEP)
- The default mode is NORMAL, and the SLEEPINATURE mode with the indicator be light up.
TIMER (0.5 – 7.5 HOURS)
- Press the button of ON/OFF (10), to power on the appliance.
- Press the button of TIMER (6) to the desired time period (0.5-7.5 Hours)
- It will now remain in operation until the selected period of time runs out.
- After the timer runs over, the device will turn off.
OSCILLATION
- Press the button of ON/OFF (10), to power on the appliance.
- Press the button of OSCILLATION (9), appliance will swing from Left to Right.
REMOTE CONTROL
- Al the function above can be setting by remote control
CLEANING AND MAINTENANCE
Before cleaning the appliance always disconnect the power plug from the receptacle.
- The appliance, the power cord and the power plug should not be immersed in water or other liquids when you are cleaning them. Clean them with a dry cloth
- If it is very dirty, the outside of the appliance can be wiped carefully with a moist cloth and then dried carefully. Make sure that no moisture penetrates into the interior of the appliance.
- Do not use any harsh cleaners, steel brushes, scouring powder o other hard objects to clean the appliance as these can cause scratches on the surfaces.
- Clean the appliance regularly.
- Never use solvents, benzene or oil-based cleaners as these can damage the housing
- Re-tighten visible screw connections on the appliance regularly in order to ensure that the device is functioning properly.
DISPOSAL
Used electric household devices
- If you do not want to use your electrical appliance any longer, retum it free of charge to a recycling depot for used electric appliances
- Used electric devices do not belong in the household garbage (see symbol)
Further disposal instructions
- Return the electrical appliance in such a condition that its later re-use or recycling is not adversely affected. Batteries must be removed in advance and the destruction of parts which contain fluids must be avoided
- Electrical appliances can contain harmful substances. Improper handing or damage:
to the appliance can lead to health problems or water or ground contamination, when the appliance is recycled later.
SPECIFICATION
PRODUCT: TOWER FAN
MODEL: TST08-RG
POWER: 50W
VOLTAGE: 230V / 50Hz
COMPANY INFORMATION
Made In China
Allimages serve as illustrations only and do not always show exact
representations of the device.
Al rights reserved
IMPORTER ADDRESS:
MH STAR UK LTD
Unit 27, Perivale Park,
Horsemen lane South
Perivale, UB6 7RH
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>