AVANTEK DVB-T Indoor HDTV Antenna Instruction Manual
- June 13, 2024
- AVANTEK
Table of Contents
AVANTEK DVB-T Indoor HDTV Antenna Instruction Manual
Product Introduction
This indoor antenna brings you access to free over-the-air TV broadcast channels (digital terrestrial television or digital video broadcasting) in full 1080p. Please follow the guidelines in this instruction manual for the best product performance and user experience.
Specifications
| Antenna Dimensions | 13.1 x 12.2 in (33 x 31 cm) |
|---|---|
| **** Frequency Coverage | VHF 40-230 MHzUHF 470-860 MHz |
| Gain | VHF: 25 dB, UHF: 20 dB |
| Impedance | 75 Ω |
| Operating Temperature | -45 – 185 °F (-40 – 85 °C) |
| Coaxial Cable Length | 10 ft (3 m) |
Installation and Setup
-
Connect the antenna to the connecting box, as shown in the picture.
-
Connect the connecting box to the ANT/IN port on the TV or STB (set-top box).
-
Connect the connecting box to a power outlet using the AC adapter.
-
Place the antenna in a desired position. You may hang it on the wall or window, or lay it on any flat surface.
-
Set the TV to scan for channels in the setup menu. This function may be listed as auto-program, auto-scan, channel search or channel scan. Refer to the manual of your TV for further instructions.
-
Please note that network availability may vary significantly based on your geographical location. A list of all possibly available channels in your area may be obtained from the local broadcasters.
User Location| Website(s) That May Be Useful
---|---
US| http://dtv.gov/maps
UK| http://www.dtg.org.uk/work/coverage.htmlhttp://www.freeview.co.uk/availability
Germany| http://www.dvb-t-portal.de/Regionen/
Europe| http://www.dvbtmap.eu/ -
Please note that the actual antenna reception depends strongly on
its distances from the TV broadcast towers, the local terrain and your home surroundings. You may need to adjust the antenna position and rescan for the channels if reception is poor. -
You may fix the antenna in its optimal position using the double-faced adhesive tape.
Trouble Shooting
“Why can’t I get any channels from the antenna?” answer-0=”A1.1. Your TV may
not be functioning in the desired mode, or may not be scanning for channels
properly. Please refer to the manual of your TV for detailed instructions. EN
4 A1.2. There may be obstructions between your antenna and the signals. Please
try to reposition the antenna and rescan for the channels. A1.3. Your TV may
not have a built-in digital tuner, or your STB may not support HD tuning.
Please use a TV or STB that supports HD digital tuning. ” image-0=””
headline-1=”h2″ question-1=”. Why is my reception so poor?” answer-1=”A2.1.
The signals at the position of your antenna may be very weak due to
obstructions in your surroundings. Please try to reposition the antenna and
rescan for the channels. It may help to place the antenna in a higher position
or close to a window.” image-1=”” headline-2=”h2″ question-2=”Why can’t I get
a specific channel that is known to be available in my area?” answer-2=”A3.1.
There may be obstructions between the antenna and the broadcast tower of your
desired channel. Please try to reposition the antenna and re-run the channel
scan.” image-2=”” count=”3″ html=”true” css_class=””]
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>