GE APPLIANCES CM22 Chest Freezers Owner’s Manual
- June 4, 2024
- GE Appliances
Table of Contents
- GE APPLIANCES CM22 Chest Freezers
- IMPORTANT SAFETY INFORMATION
- INSTALLATION
- CONNECTING ELECTRICITY
- Operation
- Features
- Defrosting Instructions
- Care And Cleaning
- Preparing of Installation
- Troubleshooting Tips
- Freezer Limited Warranty
- Consumer Support
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
GE APPLIANCES CM22 Chest Freezers
THANK YOU FOR MAKING GE APPLIANCES A PART OF YOUR HOME.
Whether you grew up with GE Appliances, or this is your first, we’re happy to
have you in the family.
We take pride in the craftsmanship, innovation and design that goes into every
GE Appliances product, and we think you will too. Among other things,
registration of your appliance ensures that we can deliver important product
information and warranty details when you need them.
Register your GE appliance now online. Helpful websites and phone numbers are
available in the Consumer Support section of this Owner’s Manual. You may also
mail in the pre-printed registration card included in the packing material.
IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
WARNING To reduce the risk of fire, explosion, electric shock, or injury when using your freezer, follow these basic safety precautions:
- This freezer must be properly installed and located in accordance with the Installation Instructions before it is used.
- Unplug the freezer before making repairs or cleaning.
- NOTE: Power to the freezer cannot be disconnected by any setting on the control panel.
- NOTE: Repairs must be performed by a qualified Service Professional
- Replace all parts and panels beifore operating
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- Do not use an extension cord.
- To prevent suffocation and entrapment hazards to children, remove the lid from any freezer before disposing of it or discontinuing its use.
- To avoid serious injury or death, children should not stand on, or play in or with the appliance.
- Children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge can use this appliance only if they are supervised or have been given instructions on safe use and understand the hazards involved.
- This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels, bed & breakfast and other residential environments catering and similar non-retail applications.
CAUTION: To reduce the risk of injury when using your freezer, follow these basic safety precautions.
- Do not clean freezer with warm water when itis cold. Components may break if exposed to sudden temperature changes or impact, such as bumping or dropping.
- Keep fingers out of the “pinch point” areas; clearances between the lid and cabinet are necessarily small. Be careful closing lid when children are in the area.
- Do not touch the cold surfaces in the freezer compartment when hands are damp or wet, skin may stick to these extremely cold surfaces.
- Do not refreeze frozen foods which have thawed completely.
INSTALLATION
WARNING FIRE OR EXPLOSION HAZARD Flammable Refrigerant
This appliance contains isobutane refrigerant,
also known as R600a, a natural gas with high
environmental compatibility. However, it is also
combustible. Adhere to the warnings below to
reduce the risk of injury or property damage.
- When handling, installing and operating the appliance, care should be taken to avoid damage to the refrigerant tubing.
- Service shall only be performed by authorized service personnel. Use only manufacturer-authorized service parts.
- Dispose of the refrigerator in accordance with the Federal and Local Regulations. The flammable refrigerant and insulation material used in this product require special disposal procedures. Contact your local authorities for the environmentally safe disposal of your refrigerator
- Keep ventilation openings in the appliance enclosures or in the built-in structure clear of obstruction.
- To remove frost, scrape with a plastic or wood spatula or scraper. Do not use an ice pick or a metal, or sharp-edged instrument as it may puncture the freezer liner and then the flammable refrigerant tubing behind it.
- Do not use electrical appliances inside the food storage compartment of the appliance.
- Do not use any electrical device to defrost your freezer
CONNECTING ELECTRICITY
WARNING ELECTRICAL SHOCK HAZARD
- Plug into a grounded 3-prong outlet.
- Do not remove the ground prong.
- Do not use an adapter.
- Do not use an extension cord.
- Failure to follow these instructions can result in death, fire, or electrical shock.
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.
- The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.
- Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded?
- Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.
- The freezer should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.
- A 115 Vot AC, 60 Hz, 15- or 20-amp fused, grounded electrical supply is required. This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.
- Never unplug your freezer by pulling on the power cord. Always grip the plug firmly and pull it straight out from the outlet.
- Immediately discontinue the use of a damaged supply cord. If the supply cord is damaged, it must be replaced by a qualified service professional with an authorized service part from the manufacturer.
- When moving the freezer away from the wall, be careful not to roll over or damage the power cord.
PROPER DISPOSAL OF YOUR OLD APPLIANCE
WARNING SUFFOCATION AND ENTRAPMENT HAZARD
Failure to follow these disposal instructions can result in death or serious injury
IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous even if they will sit for “just a few days.” If you are getting rid of your old appliance, please follow the instructions below to help prevent accidents.
Before You Throw Away Your Old Freezer:
- Take off the freezer lid.
- Leave the baskets in place so that children may not easily climb inside.
Refrigerant and Foam Disposal:
Dispose of the appliance in accordance with Federal and Local Regulations. Flammable insulation material used requires special disposal procedures. Contact your local authorities for the environmentally safe disposal of your appliance.
Operation
Starting the Freezer
- Clean the inside of the freezer with a mild solution of baking soda and water (see Care and Cleaning).
- Connect the cord to the power outlet.
- Make sure the temperature control is set at the midpoint between Cold and Coldest.
- Allow the freezer to operate for at least 6 to 8 hours before placing food inside.
Features
Controls
Freezer Status Lights
RED: The red light will turn on automatically when the temperature of the
freezer is too high, above 23°F (-5°C) for 60 minutes. It will go off once the
temperature is below 20°F (-7°C).
YELLOW: The yellow light will flash when the red temperature light is on.
You must press the Alarm Reset Button to turn the yellow light off. If the
yellow light is flashing and the red temperature light is off, you have
experienced a home power loss. You must press the Alarm Reset Button to turn
the yellow light off.
GREEN: The green light is the indicator light and assures you that your
freezer is running. If the indicator light is not glowing, immediately check
for power interruption, unplugged power cord, open circuit breaker, blown
fuse, or burned out indicator light. If the light is burned out, contact
service for a replacement.
Alarm
Audio alarm indicates that the freezer temperature is too high.
Alarm Reset Button
Push the Alarm Reset button to turn the alarm off. Once the button is pushed,
the yellow light will stop flashing and the alarm will shut off.
Temperature Control Dial
Turn using a coin in the slot to adjust the freezer temperature between Cold
and Coldest.
WARNING Freezer must be unplugged to avoid electrical hazard from power
source when installing. cleaning or repairing the freezer
Recommended Grounding Method
A 115 Volt, 60 Hz, AC only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your freezer be provided. Use an outlet that cannot be turned off by a switch Do not use an extension cord.
Sliding Basket
Store small packages in the basket to avoid losing them in the bottom of the
freezer. The basket can be moved from side to side or it can be removed when
loading or unloading the food below it.
To remove basket, lift it straight up and out. To replace basket, lower basket
back into place.
Divider (Optional) On some models there is a divider in the bottom of the unit. If divider is used, follow the assembly instructions included with the divider.
Key Eject Lock
The lock is spring loaded so the key cannot be left in the lock. To lock or
unlock, press the key in while turning. If the key is lost, contact your
dealer for a replacement or go to GEApplianceParts.com. Always give the model
and serial number of the freezer when requesting a replacement key.
WARNING TO prevent a child from being entrapped, keep the key out of
reach of children and away from the freezer.
Defrosting Instructions
- In most climates, defrosting will be necessary only about twice a year.
- To have your freezer operate most efficiently, do not permit more than 1/4″ (6 mm) thickness of frost, on average, to accumulate on the walls.
- To remove frost, scrape with a plastic or wood spatula or Scraper.
- Do not use boiling water as it may damage the freezer.
WARNING Risk of fire or explosion.
The flammable refrigerant used.
- To remove frost, scrape with a plastic or wood spatula or scraper. Do not use an ice pick or a metal, or sharp-edged instrument as it may puncture the freezer liner and then the flammable refrigerant tubing behind it.
- Do not use any electrical device to defrost your freezer
For Complete Defrosting
-
Turn the temperature control to far left COLD setting and unplug the freezer.
-
Remove all food and place it in corrugated boxes, insulated bags, picnic coolers, etc. Use towels and newspapers for insulation as needed.
-
Place a tray (not included) in front of the freezer, beneath the exterior drain plug to collect the water. Pull out the drain plug about 1″ until the drain hole on the plug shows completely. Turn the drain plug clockwise until the arrow is pointed down. Unscrew counterclockwise to remove the interior drain plug. This allows the water to flow out into the tray.
NOTE: Water that has accumulated at the bottom of the freezer during defrosting will drain into the tray. Monitor the tray under the drain to avoid overflow. -
With the lid open, you may choose to use pans of hot tap water (less than 120° F) to speed defrosting.
-
Directing air from an electric fan into the freezer will also help. Do not place fan or any electrical device in the freezer. Remove large pieces before they melt.
-
Wipe water from walls with a towel or sponge. After defrosting, clean the inside of the freezer (see Care and Cleaning).
-
Replace the drain plugs.
-
Plug in the freezer. Return the temperature control to its previous position and return the food to the freezer.
WARNING Freezer must be unplugged to avoid electrical hazards from the power source when defrosting the unit.
Care And Cleaning
Cleaning Your Freezer
Outside. Protect the paint finish. The finish on the outside of the
freezer is a high-quality, baked-on paint finish. With proper care, it will
stay new-looking and rust-free for years. Apply a coat of appliance polish wax
when the freezer is new and then at least twice a year. Appliance polish wax
also works well to remove tape residue from freezer surfaces.
Keep the finish clean. Wipe with a clean cloth lightly dampened with
appliance polish wax or mild liquid dishwashing detergent. Dry and polish with
a clean, soft cloth. Do not wipe the freezer with a soiled dishwashing cloth
or wet towel. Do not use scouring pads, powdered cleaners, bleach, or cleaners
containing bleach.
NOTICE: Care should be taken in moving the freezer away from the wall.
All types of floor coverings can be damaged, particularly cushioned coverings
and those with embossed surfaces.
Inside. Clean the inside of your freezer at least once a year. We recommend that the freezer be unplugged before cleaning. If this is not practical, wring excess moisture out of sponge or cloth when cleaning in the vicinity of switches, lights or controls. Use warm water and baking soda solution-about a tablespoon of baking soda to a quart of water. Rinse thoroughly with water and wipe dry. Do not use cleaning powders or other abrasive cleaners. DO NOTwash removable parts in a dishwasher. An open box of baking soda in the freezer will absorb stale freezer odors. Change the box every three months.
CAUTION Damp objects stick to cold metal surfaces. DO NOT touch interior metal surfaces with wet or damp hands.
In Case of Extended Power Failure
- Keep the freezer lid closed. Your freezer will keep food frozen for 24 hours provided warm air is not admitted.
- If the freezer is out of operation for 24 hours or more, add dry ice. Leave the ice in large pieces. Add more ice as required.
CAUTION Hand Handling of dry ice can cause freezing of the hands-gloves or other protection is recommended.
- If dry ice is not available, move food to a frozen food locker temporarily until power is restored.
Preparing to Move
- Disconnect the power cord plug from the wall outlet.
- Remove foods, defrost (on Manual Defrost models) and clean the freezer.
- Secure all loose items such as baskets by taping them securely in place to prevent damage.
- Be sure the freezer stays in an upright position during actual moving and during transportation. The freezer must be secured during transportation to prevent movement.
- Protect outside of the freezer with a blanket.
Preparing for Vacation
To maintain the freezer in operation during vacations, be sure your house
power is not turned off. For sure protection of freezer contents, you may want
to ask a neighbor to check the power supply and freezer operation every 24
hours.
For extended vacations or absences, you may prefer to move your frozen foods to a storage locker temporarily. If your freezer is to be left empty, disconnect power cord plug from wall outlet. To prevent the formation of odors, place open box of baking soda in the freezer and leave freezer lid open.
Save Money and Energy
- The freezer should be located in the coolest area of the room, away from heat-producing appliances or heating ducts, and out of direct sunlight.
- Let hot foods cool to room temperature before placing in the freezer. Overloading the freezer forces the compressor to run longer. Foods that freeze too slowly may lose quality or spoil.
- Be sure to wrap foods properly, and wipe containers dry before placing them in the freezer. This cuts down on frost buildup inside the freezer.
- Freezer baskets should not be lined with aluminum foil, wax paper or paper towels. Liners interfere with cold air circulation, making the freezer less efficient.
- Organize and label food to reduce lid openings and extended searches. Remove as many items as needed at one time, and close the lid as soon as possible.
Preparing of Installation
Freezer Location
- Your freezer should be conveniently located for day-to-day use in a dry, well-ventilated room.
- Do not install the freezer where the temperature will go below 0°F (-18°C) or above 110°F (43°C), because it will not maintain proper temperatures.
- Do not install the freezer in a location exposed to rainwater or direct sunlight.
- Be sure to install your freezer on a floor strong enough to support it when it is fully loaded.
Level Freezer
- Level the freezer from side to side and front to back so that the lid will seal properly. Use shims to level thefreezer if necessary.
NOTE: It should not be necessary to remove the lid during installation. If, for some reason, the hinges need adjustment, call a professional service company..
Clearances and Ventilation
- Allow at least 2″ (50.8 mm) clearance on both sides of the freezer and 2″ (50.8 mm) between the back of the freezer and the wall. Leave room above the freezer to open the lid.
- Keep flammable materials and vapors, such as gasoline, away from the freezer.
- Do not cover the freezer with items such as blankets, sheets, tablecloths, etc. This reduces air circulation.
Lid Removal
CAUTION: LIFTING HAZARD
The lid is heavy. Use both hands to secure the lid before lifting
CAUTION: HINGE SPRING UNDER TENSION
If it is necessary to remove the lid, follow these steps:
- Remove the lower part of the hinge cover and then remove the upper part.
- Open the lid to the maximum position. (The hinges are loosest at this position.)
- Remove the 4 screws from the upper part of the hinge and lid. The 16′ freezer has 3 hinges and the 22′ freezer has 4 hinges total.
- To reinstall lid follow steps in reverse. Tighten all hinge screws but avoid over-tightening to prevent stripping. Reinstall hinge covers.
Troubleshooting Tips
Before you call for service
Save time and money! Review the charts on the following pages first and you may not need to call for service.
Problem | Possible Causes | What To Do |
---|---|---|
Freezer does not operate | Temperature control set to | |
Cold position. | Move the control to a colder temperature setting. | |
Freezer is unplugged. | Push the plug completely into the outlet. | |
The fuse is blown/circuit breaker is tripped. |
Replace fuse or reset the breaker.
Freezer starts/stops too frequently| Lid left open.|
Check to see if package is holding lid open.
Too frequent or too long lid openings.| Open the lid
less often.
Temperature control set too cold.| See About the operation
of your freezer.
Freezer operates too long| Lid left open.| Check to see if
package is holding lid open.
Too frequent or too long lid openings.| Open the lid
less often.
Temperature control set too cold.| See About the operation
of your freezer.
Inadequate air circulation space around cabinet.|
See Preparing to install the freezer.
Room or outside weather is hot.| It’s normal for the freezer to work
harder under these conditions.
Freezer has been disconnected recently for a period of
time.| It takes 6-8 hours for the freezer to cool down completely.
Large amounts of warm or hot food have been
stored recently.| Warm food will cause the freezer to run more until
the desired temperature is reached
Noisy operation or cabinet vibrates| Floor may be weak,
causing freezer to vibrate when compressor is on.|
Check to make sure freezer is located on solid floor and use shims, as needed,
to level the unit.
Cabinet is not positioned solidly on floor.| 6HH
3UHSDULQJ WR LQVWDOO WKH IUHH]HU. 8VH VKLPV, DV
needed, to level the unit.
Freezer is touching the wall.| Level freezer or move slightly. See Level
Freezers.
Freezer temperature too warm| Lid left open.| Check to
see if package is holding lid open.
Too frequent or too long lid openings.| Open the lid
less often.
Temperature control is set too warm.| Turn control
to a colder setting. Allow several hours for the temperature to stabilize.
Large amounts of water or hot food may have been
stored recently.| Wait until the freezer has had a chance to reach its
selected temperature.
Freezer has been disconnected recently.| Freezer requires
6-8 hours to cool down completely.
Foods defrosting| Temperature control set to Cold
position.| Move the control to a colder temperature setting.
Freezer is unplugged.| Push the plug completely into the outlet.
The fuse is blown/circuit breaker is tripped.|
Replace fuse or reset the breaker.
Lid left open.| Check to see if package is holding lid open.
Too frequent or too long lid openings.| Open the lid
less often.
Freezer temperature too cold| Temperature control
set too cold.| See About the operation of your freezer.
Problem| Possible Causes| What To Do
---|---|---
Moisture forms on outside of cabinet| Not unusual during periods of
high humidity.| Wipe surface dry.
Lid may not be seating properly, causing cold air from inside the freezer
to meet warm moist air from the outside.| See Preparing to install the
freezer.
Interior light does not work| No power at outlet.| Replace fuse or
reset the breaker.
Freezer is unplugged.| Push the plug completely into the outlet.
Lid won’t fully close by itself| Package holding lid open.| Move
package to a different location.
Slow starting time after being off| Built-in overload protection.|
This is normal after being off.
([FHVVLYH IURVW EXLOGXS| Lid left open.| Check to see if package is
holding lid open.
Too frequent or too long lid openings.| Open the lid less often.
Not unusual during periods of high humidity.| Wipe surface dry.
)UHH]HU H[WHUQDO VXUIDFH
temperature is warm
| 7KH H[WHUQDO IUHH]HU ZDOOV FDQ
be as much as 30°F warmer than room temperature.
| This is normal while the compressor works to transfer heat from inside the
freezer cabinet.
Louder sound levels whenever freezer is on| Modern freezers have
increased storage capacity and more stable temperatures. They require a high-
efficiency compressor.| This is normal. When the surrounding noise level is
low, you might hear the compressor running while it cools the interior.
Higher sound levels when compressor comes on| Freezer operates at
higher pressures during the start of the ON cycle.| This is normal. Sound
will level off or disappear as freezer continues to run.
Popping or cracking sound when compressor comes on| 0HWDO SDUWV
XQGHUJR H[SDQVLRQ
and contraction, as in hot water pipes.
| This is normal. Sound will level off or disappear as freezer continues to
run.
Bubbling or gurgling sound, like boiling water| Refrigerant (used to
cool freezer) is circulating throughout the system.| This is normal.
Moisture forms on inside freezer walls| Weather is hot and humid,
which increases internal rate of frost buildup.| This is normal.
Lid may not be seating properly.| See Preparing to install the freezer.
Lid is kept open too long, or is opened too frequently.| Open the lid
less often.
Odors in freezer| Interior needs to be cleaned.| Clean interior
with sponge, warm water and baking soda.
Foods with strong odors are in the freezer.| Cover the food tightly.
Normal Operating Characteristics
These things are normal and do not indicate a need for service.
- A warm cabinet exterior as the refrigeration system transfers heat from the inside to the outside through the exterior cabinet walls.
- The sound of the high-efficiency compressor motor.
Freezer Limited Warranty
GEAppliances.com
All warranty service is provided by our Factory Service Centers, or an
authorized Customer Care technician. To schedule service online, visit us at
geappliances.com/service, or call GE
Appliances at 800.GE.CARES (800.432.2737). Please have your serial number and
your model number available when calling for service. In Canada, call
800.661.1616.
For the Period of: | GE Appliances Will Replace |
---|
One Year
From the date of the original purchase
| Any part of the freezer which fails due to a defect in materials or workmanship.
‘XULQJ WKH limited one-year warranty , GE Appliances will also provide, free of charge, all labor and related service to replace the defective part.
What GE Appliances Will Not Cover:
- Service trips to your home to teach you how to use the product.
- Improper installation, delivery or maintenance.
- Failure of the product if it is abused, misused, or used for other than the intended purpose or used commercially.
- Loss of food due to spoilage.
- Damage caused after delivery.
- Replacement of house fuses or resetting of circuit breakers.
- Damage to the product caused by accident, fire, floods or acts of God.
- Incidental or consequential damage caused by possible defects with this appliance.
- Product not accessible to provide required service.
EXCLUSION OF IMPLIED WARRANTIES
Your sole and exclusive remedy is product repair as provided in this Limited
Warranty. Any implied warranties, including the implied warranties of
merchantability or fitness for a particular purpose, are limited to one year
or the shortest period allowed by law.
For US Customers: This limited warranty is extended to the original purchaser and any succeeding owner for products purchased for home use within the USA. If the product is located in an area where service by a GE Appliances Authorized Servicer is not available, you may be responsible for a trip charge or you may be required to bring the product to an Authorized GE Appliances Service location for service. In Alaska, the limited warranty excludes the cost of shipping orservice calls to your home. Some states do not allow the exclusion or limitation of incidental or consequential damages. This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights are, consult your local or state consumer affairs office or your state’s Attorney General.
Warrantor: GE Appliances, a Haier company Louisville, KY 402255
For Customers in Canada: This warranty is extended to the original purchaser and any succeeding owner for products purchased in Canada for home use within Canada. In-home warrant service will be provided in areas where it is available and deemed reasonable by Mabe to provide.
Warrantor Canada: MC Commercial, Burlington, Ontario, L7R 5B6
Consumer Support
GE Appliances Website
Have a question or need assistance with your appliance? Try the GE Appliances
website 24 hours a day, any day of the year! You can also shop for more great
GE Appliances products and take advantage of all our on-line support services
designed for your convenience. In the US:
GEAppliances.com In Canada:
GEAppliances.ca
Register Your Appliance
Register your new appliance on-line at your convenience! Timely product
registration will allow for enhanced communication and prompt service under
the terms of your warranty, should the need arise. You may also mail in the
pre-printed registration card included in the packing material.
In the US: GEAppliances.com/register
In Canada:
Prodsupport.mabe.calcrm/Products/ProductRegistration.aspx
Schedule Service
Expert GE Appliances repair service is only one step away from your door. Get
on-line and schedule your service at your convenience any day of the year. In
the US: GEAppliances.com/service or call 800.432.2737 during normal business
hours.
In Canada: GEAppliances.ca/en/support/service-
request or call
800.561.3344
Extended Warranties
Purchase a GE Appliances extended warranty and learn about special discounts
that are available while your warranty is still in effect. You can purchase it
on-line anytime. GE Appliances Services will still be there after your
warranty expires. In the US: GEAppliances.com/extended-warranty or call
800.626.2224 during normal business hours.
In Canada: GEAppliances.ca/en/support/purchase-extended-
warranty or
call 800.290.9029
Parts and Accessories
Individuals qualified to service their own appliances can have parts or
accessories sent directly to their homes (VISA, MasterCard and Discover cards
are accepted). Order on-line today 24 hours every day.
In the US: GEApplianceparts.com or by phone at 877.959.8688 during normal business hours. Instructions contained in this manual cover procedures to be performed by any user. Other servicinggenerally should be referred to qualified service personnel. Caution must be exercised, since improper servicing may cause unsafe operation. Customers in Canada should consult the yellow pages for the nearest Mabe service center, visit our website at GEAppliances.ca/en/products/parts- filters-accessories or call 800.661.1616.
Contact Us
If you are not satisfied with the service you receive from GE Appliances,
contact us on our Website with all the
details including your phone number, or write to:
In the US: General Manager, Customer Relations | GE Appliances, Appliance
Park | Louisville, KY 40225
GEAppliances.com/contact
In Canada: Director, Consumer Relations, Mabe Canada Inc. | Suite 310, 1
Factory Lane | Moncton, N.B. E1C 9M3 GEAppliances.ca/en/contact-
us
References
- Appliance Parts, Accessories & Water Filters | GE Appliances
- GE Appliances Canada | Homepage
- Contact Us or Get Help with Questions | GE Appliances
- GEAppliances.com/register
- Appliance Repair Service and Support | GE Appliances
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>