HoMEDiCS WFL-TRTW EnviraScape Tranquil Tower Illuminated Floorstand Relaxation Fountain Instruction Manual

HoMEDiCS WFL-TRTW EnviraScape Tranquil Tower Illuminated Floorstand

Relaxation Fountain

Product Information: Illuminated Floorstand Relaxation Fountain – Tranquil Tower

The Illuminated Floorstand Relaxation Fountain is a high-quality crafted product by HoMedics that provides soothing sounds of nature to create a relaxing environment. It is designed to enhance your indoor space with the sound of flowing water, which releases
negative ions and promotes relaxation. This fountain is built with durability in mind, ensuring years of dependable service.

EnviraScape, the brand behind this product, offers a creative design that adds beauty to any indoor environment. It provides you with the luxury of vital benefits such as sound therapy and aesthetic appeal. The flowing water and gentle illumination create
a tranquil atmosphere, making it an ideal addition to your home or office.

Product Features:

• High-quality craftsmanship
• Creates soothing sounds of nature
• Enhances the environment by releasing negative ions
• Promotes relaxation
• Creative design adds beauty to any indoor space
• Includes an illuminated floorstand for added visual appeal

Product Usage Instructions

1. Unpack the product and wipe off any dust with a damp cloth.
2. Assemble the fountain stand:
3. Place the Bottom Ring on a flat surface, allowing it to slightly hang over for easy alignment and tightening of screws.
4. Align the holes of the Bottom Ring with the holes on the Bottom Legs and partially secure by tightening the screws using the provided screwdriver. Repeat for all three Bottom Legs.
5. Do not tighten the screws completely at this point.
6. Continue with the assembly:
7. Attach the Upper Legs to the Bottom Legs by aligning the holes and securing them with the provided screws.
8. Connect the Upper Ring to the assembled legs.
9. Attach the Leg Holder to the Bottom Leg using the screws provided.
10. Place the pump in the designated area and ensure it is completely submerged in water. If the pump is making noises, it may not be fully submerged.
11. Set the fountain and all parts on waterproof surfaces to prevent damage.
12. Plug in the adaptor to a power source.
13. Turn on the fountain and enjoy the soothing sounds and visual appeal of the illuminated floorstand relaxation fountain.

Warranty Information:

This product comes with a one-year limited warranty from the date of purchase. The warranty covers defects in material and workmanship. To obtain warranty service, either hand-deliver or mail the unit along with your dated sales receipt (as proof of purchase) and a $10.00 handling fee payable to HoMedics, Inc. to cover handling. Warranty service is provided solely through HoMedics Service Center.

For more information or inquiries about our product line in the USA, please visit www.homedics.com.

The soothing sounds of nature

Thank you for purchasing EnviraScape, HoMedics’ floorstand relaxation fountain. This, like the entire HoMedics product line, is built with high- quality craftsmanship to provide you with years of dependable service. We hope that you will find it to be the finest product of its kind.
EnviraScape enables you to create an all-encompassing environment with sound. The sound of flowing water enhances your environment by releasing negative ions, and promoting relaxation. Only
EnviraScape offers you the luxury of these vital benefits with its creative design which adds beauty to any indoor environment.

EnviraScape Features

• Innovative, artistic design enhances the environment at home or at work.
• Special effect lighting illuminates fountain for a more dramatic effect.
• The soothing sound of cascading waters create a stress free ambiance.
• Improves concentration by masking distractions so you can stay focused.
• Durable electrical water pump can be operated from any indoor electrical outlet.
• Floorstand size-fountain measures 11.75″L x 11.75″W x 32″H.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING
DANGER – To reduce the risk of electric shock:

• Always unplug the appliance from the electrical outlet immediately after using and before cleaning.
• Do not reach for an appliance that has fallen into water. Unplug it immediately.
• Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.
• Do not connect to any voltage other than that shown on the pump.
• Do not pump flammable liquids.
• Do not use water above 86o Fahrenheit .

CAUTION:
The pump must be completely submerged in water. If the pump is making noises, most likely it is not completely submerged in water.

CAUTION:
Only set the fountain and fountain parts on waterproof surfaces

WARNING- To reduce the risk of burns, fire, electric shock or injury to persons:

• An appliance should never be left unattended when plugged in. Unplug from outlet when not in use and before putting on or taking off parts or attachments.
• Close supervision is necessary when this appliance is used by or near children, invalids or disabled persons.
• Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by HoMedics; specifically any attachments not provided with the unit.
• Never operate this appliance if it has a damaged cord, plug, pump, cable or housing. If it is not working properly, if it has been dropped or damaged, return it to Homedics Service Center for examination and repair.
• Keep cord away from heated surfaces.
• Never drop or insert any object into any opening.
• Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
• Do not carry this appliance by power cord or use cord as handle.
• To disconnect, remove plug from outlet.
• This appliance is designed for indoor use only.
• Do not use outdoors.
  SAVE THESE INSTRUCTIONS

Caution – Please read all instructions carefully before operating.

• Never leave the appliance unattended, especially if children are present.
• Never cover the appliance when it is in operation.
• This unit should not be used by children without adult supervision.
• Connect the pump with the proper voltage as indicated on the pump label.
• Always keep the cord away from high temperature and fire.
• Unplug the pump from power source before cleaning, maintenance or disassembling.
• To get the best flowing effect, product must be placed on a flat surface and should never be placed on an electrical appliance.
• Never let pump run dry, as this will shorten life of the pump.
• Do not lift, carry, hang, or pull the pump by the power cord.
• Operate with tap or distilled water only.
• Operate pump completely submerged for proper cooling.
• The electrical cord of this product cannot be replaced. If it sustains damage, you must stop using this product immediately and return it to the HoMedics Service Center for repair. (See the warranty section for HoMedics address.)
• Disconnect the appliance from outlet before putting hands into water.
• HoMedics has provided the optimum length power cord for this product to reduce the risks resulting from becoming entangled in or tripping over a longer cord. We do not recommend the use of an extention cord.

Assembly and Instructions for Use

1. Unpack the product. Wipe off dust with a damp cloth. (Fig 1)

2. Assemble the fountain stand:
   NOTE: For easy reference, each leg is labeled.

   • a. Place the Bottom Ring on a flat surface allowing the ring to slightly hang over for easy alignment and
     tightening of screws as shown in Figure 2. Align the holes of the Bottom Ring with the holes on the Bottom Legs and PARTIALLY secure by tightening the screws using the screwdriver provided. Repeat until all three of the Bottom Legs are partially secure. (Fig 2)
     NOTE: DO NOT tighten completely at this point.

   • b. Insert the Bottom Legs into the Leg Holder and adjust so they sit evenly. Now, completely tighten the three screws in the Leg Holder and the three screws in the Bottom Ring. (Fig 3)
     NOTE: Before inserting legs, you may need to unscrew the screws from the Leg Holder to allow for the legs to slide in the holder properly.

   • c. Insert the Upper Legs into the other end of the Leg Holder.
     NOTE: The Bottom Leg with the cord clip should be positioned on the same side of the Leg Holder as the Upper Leg with the cord clip. DO NOT tighten screws in Leg Holder at this point. (Fig 4)

  * d. Align the holes of the Upper Ring with the holes on the Upper Legs and adjust so they sit evenly. Now, completely tighten the three screws located on the Upper Ring. (Fig 5)
  * e. Tighten the remaining three screws located on the Leg Holder. (Fig 5)
  * f. Check to be sure ALL screws are tightened completely. Now the stand is fully assembled. (Fig 6)

3. Assemble the fountain top:
   • a. Familiarize yourself with the pump. The switch located at the front of the pump controls the pump speed. The speed is indicated by a plus (+) and minus (-) sign. To increase the speed, move the switch slowly downward in the direction of the plus sign. You will hear a click as the switch moves to each speed level. At its highest speed level, the switch will cease to move any further. To decrease the pump speed, move the switch upward toward the minus sign. Similarly, at its lowest speed, the switch will cease to move any further (Fig 7). NOTE: It is recommended the pump be set at its highest speed during assembly and later adjusted to a lower setting if desired. Be sure to unplug the pump before adjusting the speed setting.

  * b. Insert the rubber end of the waterproof lights into the light clips located inside the base while keeping the light cords in the position shown in Figure 8.  

(Fig 8) Slight twisting may help to push the rubber end through the clip more easily.
NOTE: Be gentle with the bulb cover since it is made of glass.

  * c. Insert small end of the connector into the pump.(Fig 9)
  * d. Insert LED light into the water inlet attached to the top of the fountain. (Fig 10)
  * e. Insert the large end of the connector into the water inlet attached to the top of the fountain. (Fig 10) NOTE: You must first slide the LED light through the water inlet.
  * f. Place the fountain top; with pump attached, on the fountain base. (Fig 11)

4. Set the assembled fountain top onto the metal stand.
   Align cord so it runs down the Upper and Lower Legs that contain the cord clips.
   NOTE: You may need to carefully bend open the cord clips to allow room for the cord to be inserted. Place cord in clips to minimize appearance. (Fig 12)

5. Fill base with 50 oz. of clean water. Add enough water so that the top of the pump is completely submerged.(Fig 13)

6. Attach the A/C adaptor jack to the base power cord. DO NOT plug into outlet at this time. (Fig 1)

7.  Set the fountain on a level, waterproof surface.

8. Plug the cord into 120V household outlet. The switch located on the power cord controls the fountain. If pump doesn’t operate, rotate in-line switch once to turn “on” and once more to turn “off”. Monthly maintenance will add to your pump’s life. NOTE: Ensure that the electrical cord loops below the electrical outlet to form a ‘Drip Loop’ (Fig 14). This will prevent water from running down the cord into the electrical outlet.

Maintenance

• To clean the pump:
  Unplug from electrical outlet. Remove it from the base of the fountain. Use a small brush or stream of water to remove any debris (Fig 15).

• To keep water clean:
  Periodically change water and clean the product according to the water condition. Keeping the water clean prevents the water from becoming sticky and forming micro-organisms. We recommend distilled water to prevent mineral build-up.

• To clean off hard water deposits on the base:
  Soak the container in a mixture of vinegar and water to clean and remove any mineral build-up.

• Keeping the water at an optimum level:
  Add water periodically to keep water level at an optimum level to avoid shortening the life of the pump.
  NOTE: Never let the pump run dry, as this will shorten the life of the pump.

• Fountain Storage
  Unplug the fountain from the electrical outlet, empty the water, and store fountain in a dry, cool place.

• Changing Light Bulb
  First unplug fountain and let bulb cool down. Remove the bulb cover by holding glass bulb cover in dry hand and rubber neck with other hand. Slowly pull apart. Slight twisting may help to loosen. Be gentle with bulb cover since it is glass. Never pull on cord. Next, pull bulb straight out and replace with new bulb, inserting prongs into the holes. Replace bulb cover securely.

Troubleshooting

• If the pump fails to operate, check the following: Check the circuit breaker, or try a different outlet to make sure the pump is getting electrical power.
  NOTE: Always disconnect from electrical outlet before handling the pump.

• If the pump gurgles, spews, or “burps”:
  Check the water level to make sure the pump has enough water to function.

• Obtaining a desired water level:
  Check the water level daily the first week to measure the rate of evaporation; refill with water as needed.

• If water is splashing outside the fountain:
  Adjust the flow control valve to a lower setting on the pump.

Mail To:

HoMedics
Consumer Relations
Service Center Dept. 168
3000 Pontiac Trail
Commerce Township, MI 48390
e-mail:
cservice@homedics.com
Detach and return order form with check or money order payable to HoMedics, Inc.
Please allow 2 to 4 weeks for delivery.

References

• Homedics Office Site - Massage, relaxation and wellness products - HoMedics.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>