JBL SA550 Classic Integrated Amplifier with Bluetooth User Guide
- June 13, 2024
- JBL
Table of Contents
SA550 Classic
Package Contents
- JBL SA550 Classic integrated amplifier
- IR Remote
- 2x AAA Batteries for the remote control
- Region Specific Power Cord(s)
- Safety and Compliance Document
- Quick Start Guide
Thank you for choosing JBL
For over 75 years, JBL has been creating best in class audio equipment for
concerts, studios, theaters, and homes around the world. JBL is the trusted
choice of leading recording artists and sound engineers. The JBL SA550 is
designed to provide you with reliable amplification for decades to come, all
with exceptional musicality so you get the most enjoyment from your music.
This handbook is a guide to installing and using the SA550 and includes
information on its more advanced features.
In the unlikely event of any fault, or you require technical assistance,
please contact our dedicated support teams by email using
luxurysupport@harman.com, or by telephone
using +44 (0) 1707 668012 or +1 888 6914 171. Or, if you simply require
further information about JBL products, our network of dealers will be happy
to help you. Further information can also be found on the JBL website at
JBL.com.
Placing The Unit
- Place the amplifier on a level, firm surface, avoiding direct sunlight and sources of heat or damp.
- Do not place the SA550 on top of a power amplifier or other source of heat.
- Do not place the amplifier in an enclosed space such as a bookcase or closed cabinet unless there is good provision for ventilation. The SA550 is designed to run warm during normal operation.
- Do not place any other component or item on top of the amplifier as this may obstruct airflow around the heat-sink, causing the amplifier to run hot (the unit placed on top of the amplifier would become hot too).
- Make sure the remote-control receiver to the right of the front panel display is unobstructed, otherwise this will impair the use of the remote-control.
Front Panel
Rear Panel
Connecting Loudspeakers
If you are unsure as to how your system should be connected, please contact your JBL dealer who will be happy to help you.
Bluetooth Operation
To pair your Bluetooth source device with the SA550, open the Bluetooth
settings on your source device and scan for discoverable products to pair
with. Select JBL SA550 #### from the list.
By default, the amplifier can be discovered and paired to when switched on and
not connected to another Bluetooth device – it does not need to be on the BT
input. This function can be overridden by changing the BT Auto SW setting in
the menu.
Note: With the BT Auto SW setting changed to Off, the amplifier must be
on the BT input to be discovered by a new device and paired for playing music.
The amplifier can recall 5 device pairings. If 5 pairings already exist and a
new pairing is made, the oldest pairing will be replaced.
Volume Control
When playing music from Bluetooth, the volume of the amplifier can be
controlled from your device.
Because portable devices often have a volume slider, there is a maximum volume
setting in the amplifier to prevent excessive volume output being selected
accidentally.
Note: To adjust the maximum volume from Bluetooth, adjust the BT Volume
setting in the menu. The default is 40.
Specifications
Continuous power output (0.5′). THD). per channel
Both channels. 80. 20Hz-20kHz| 90W
Both channels. 40. at 1kHz| 150W
Harmonic distortion. 80% fewer. 80 at 1kHz| 0.002%
Phono Input
Phono Input| Moving Magnet (MM)
Input sensitivity at 1kHz| 5mV
Input impedance| 47k0 + 100pF
Frequency response (ref. RIAA curve)| 20Hz – 20kHz ± IdB
Signal/Noise ratio (A-wtd) 50W. ref. 5mV input| 80dB
Overload mars in. ref. 5mV at 1kHz| 21dB
Line Inputs|
Nominal sensitivity| IV
Input impedance| 10k0
Maximum input| 6Vrms
Frequency response| 20Hz – 20kHz ± 0.2dB
Signal/Noise ratio A-wtd 50W. ref. IV input| 106dB
Digital Inputs
DAC| ESS9038K2M
Frequency response| 20Hz – 20kHz ± 0.05dB
Supported sample rates| Optical| 32kHz. 44.1kHz. 48kHz. 88.2kHz. 96kHz
Coaxial| 32kHz. 44.1 kHz. 48kHz. 88.2kHz. 96kHz. 1 76.4kHz. 192kHz
Bit depth| 16-bit – 24-bit
Total harmonics distortion + Noise| 0.0007%
Signal/Noise ratio (A-wtd)| 115dB
Pre-amplifier output
Nominal output level| 630mV
Output impedance| 2300
Headphone output
Load range| 160 – 2k0
Output impedance| 10
Maximum output level into 6000| 5Vrms
General
Mains voltage| 100V or 1 10-120V or 220-240V. 50-60Hz
Maximum power consumption| 500W
Dimensions in mm (including feet. control knob and connectors)| 448 W x 124 H
x 321 D
Weight (net)| 11.2kg
Weight (gross)| 14.0kq
**** The SA550 is designed to run warm in normal use, however extended use at high volume levels can result in the amplifier casework becoming hot to the touch.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
HARMAN International, Incorporated
8500 Balboa Boulevard, Northridge, CA 91329 USA
Danzigerkade 16 1013 AP Amsterdam, Netherlands
Ground Floor, Westside 2, London Road, Apsley, Hemel Hempstead,
Hertfordshire, HP3 9TD, United Kingdom
www.jbl.com
© 2023 HARMAN International Industries, Incorporated. All rights
reserved.
JBL is a trademarks of HARMAN International Industries, Incorporated,
registered in the United States and/or other countries.
Features, specifications, and appearance are subject to change without
notice.
Documents / Resources
| JBL
SA550 Classic Integrated Amplifier with
Bluetooth
[pdf] User Guide
SA550 Classic Integrated Amplifier with Bluetooth, SA550 Classic, Integrated
Amplifier with Bluetooth, Integrated Amplifier, Amplifier
---|---
| JBL
SA550 Classic Integrated
Amplifier
[pdf] Owner's Manual
SA550 Classic Integrated Amplifier, SA550 Classic, Integrated Amplifier,
Amplifier
References
- Official JBL Store - Speakers, Headphones, and More!
- Official JBL Store - Speakers, Headphones, and More!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>