LASKO S18902 18 Inch Adjustable Pedestal Fan User Manual
- June 13, 2024
- Lasko
Table of Contents
LASKO S18902 18 Inch Adjustable Pedestal Fan
Product Information
This product is an 18-inch adjustable pedestal fan, model S18902. It is designed for residential use only and is not intended for commercial, industrial, or agricultural settings. The motor of this fan is permanently lubricated, eliminating the need for additional lubrication.
Product Usage Instructions
To ensure your safety and the proper functioning of the fan, please follow these instructions:
- Always unplug the cord before moving, servicing, or cleaning the fan.
- Never place the fan in or near water.
- If you need to clean the disassembled grills, you can immerse them in mild detergent and water. Wipe all other parts with a soft cloth moistened with water and mild detergent. Make sure to dry all parts completely before reassembling.
- After any maintenance or servicing, fully reassemble the unit as described in the instruction manual before reconnecting it to the power supply.
- Never use alcohol or solvents such as gasoline, benzene, paint thinner, or other harsh cleaners on the fan.
- If you require servicing beyond general user maintenance, please contact Customer Service at 800-233-0268, Monday through Friday, from 8am-5pm Eastern.
- For storage, keep the fan in its original carton in a cool, dry place.
If you have any product or service questions, need replacement parts, or require assistance, you can reach our Customer Service team at Toll-Free 800-233-0268. They are available Monday through Friday, 8am-5pm Eastern. Please have your model number, type, and style (located on the underside of your product) ready when contacting Customer Service.
-
18″ ADJUSTABLE PEDESTAL FAN
-
MODEL S18902
-
VENTILADOR DE PEDESTAL DE 18
-
PULGADAS CON ADJUSTABLE
-
MODELO S18902
-
This Fan is for residential use only.
-
It is not intended to be used in commercial, industrial or agricultural settings.
-
READ AND SAVE THESE INSTRUCTIONS
-
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
-
KEEP INSTRUCTIONS FOR FUTURE REFERENCE.
-
SAVE THESE INSTRUCTIONS
WARNING To reduce the risk of electrical shock and fire please observe the following instructions:
- Always unplug the cord before moving, servicing or cleaning.
- NEVER place the Fan in or near water.
- Disassembled grills may be immersed to be cleaned with a mild detergent and water.Wipe all other parts with soft cloth moistened with water and mild detergent only. DRY ALL PARTS COMPLETELY BEFORE REASSEMBLING. After any maintenance or servicing, completely reassemble unit as described in this instruction manual before reconnecting to the power supply.
- NEVER use ALCOHOL or SOLVENTS such as gasoline, benzene, paint thinner, or other harsh cleaners.
- SERVICING: For servicing, other than general user maintenance, please contact Customer Service at 800-233-0268, Monday through Friday, from 8am-5pm Eastern. STORAGE: Store the Fan with these instructions, in the original carton in a cool, dry place.
- LUBRICATION: Motor is permanently lubricated.
IMPORTANT SAFETY INSTRUCTIONS
- When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock and injury to persons, including the following:
- Read all instructions before using this Fan.
- DO NOT use this fan in areas where flammable vapors are present or where products such as gasoline, solvents, oil based paint or flammable chemicals, liquids or sprays are used, stored or being applied.
- DO NOT use this fan in agricultural facilities including areas where grain, hay, or feed is stored or areas where livestock, poultry or animals are confined.
- DO NOT run power cord under throw rugs, runners, or similar coverings or allow furniture or heavy objects to rest on the cord. Do not route cord under furniture or appliances.
- The Blue Plug™ on your Lasko fan is a safety feature. It contains a non-replaceable safety device (fuse) that should not be removed or tampered with. To reduce the risk of fire, electric shock and personal injury, DO NOT attempt to remove, replace, repair or tamper with the originally supplied plug. If the Fan has stopped functioning, it may be due to the safety device incorporated in this plug. Call 800- 233-0268, Monday – Friday, between 8:00 a.m. and 5:00 p.m. Eastern for questions. If the plug warning label is missing or dam-aged, call the toll free number for a replacement label.
- THIS FAN HAS A POLARIZED PLUG (one blade is wider than the other). This plug is designed to fit into the outlet only one way. Match the wide blade to wide slot in outlet and FULLY INSERT. DO NOT attempt to bypass or defeat this safety feature. If the plug does not fit in the outlet, consult a qualified electrician. The outlet may need to be replaced.
- DO NOT use this fan outdoors, in or near a window or near water, bath tubs, swimming pools, hot tubs or other wet areas.
- DO NOT depend on the ON/OFF switch as the sole means of disconnecting power to the fan when moving, cleaning or servicing. ALWAYS unplug the fan when servicing or when not in use.
- NEVER operate any Fan with a damaged cord or plug or after the Fan malfunctions, has been dropped or damaged in any manner.
- DO NOT leave children unattended while the fan is in use or plugged in.
- Arrange cord away from traffic area and where it will not be tripped over.
Provided with an integral speed controller. Do not use with an external solid state speed control device.
STEP 1: PIPE ASSEMBLY
- Take pipe assembly out of carton as shown. (Figure 1)
- Loosen Height Adjustment Nut turning counter clockwise. (Figure 2) Raise Extension Pipe. (Figure 3)
- Tighten Height Adjustment Nut turning clockwise. (Figure 4)
STEP 2: STAND ASSEMBLY
- With a twisting motion, insert the end of the large diameter pipe into hole in Base.(Figure 5) Turning pipe while pushing will assure pipe is fully seated in Base.
For Height Adjustment:
- a) Loosen Height Adjustment Nut.
- b) Raise or lower Extension Pipe to desired height.
- c) Tighten Height Adjustment Nut.
STEP 3: HEAD ASSEMBLY
Place Head Assembly with Collar onto Extension Pipe. (Figure 6) Holding Extension Pipe firmly, twist Head Assembly downward until seated on Extension Pipe.
STEP 4: BLADE & GRILL ASSEMBLY
1. Tilt Head Assembly back. Put Rear Grill on Motor. (Figure 7) Align tab of Plastic Rear Grill with groove on top of front Mo-tor cover.
Fully seat Rear Grill and secure with Plastic Nut turning Clockwise. Slide Blade onto Motor Shaft. (Figure 8) Align Groove on blade hub with Pin on motor shaft. (Figure 8A)
Do Not take pipe apart. Should pipes become separated, insert pipe A into pipe
B.
- To secure Blade, screw Spinner onto Shaft Counter Clockwise until tight on Blade hub.
- With fan head in upright position, align Ornament of Front Grill so it is horizontal and right side up. By starting with the top of the grill and working down, insert Snaps on Rear Grill through Slots in Front Grill. (Figure 9)
OSCILLATION: Push down oscillation knob on motor housing to make fan head move
from side to side. (Figures 10 and 11)
SPEED: Control fan speed with Speed Switch at rear of motor. (Figure 12)
- 3 – High Speed
- 2 – Medium Speed
- 1 – Low Speed
TILTING: This Fan is equipped with a multi-angle Fan Head for Whole-Room Air Circulation. Follow the steps below to properly adjust the “tilt angle” of your Fan. (Figure 13)
Place one hand on the pole just under the Fan Neck. Place your other hand on top of Fan. Gently push or pull the Fan Head until it is in the desired position.
Register Your Product Today www.laskoproducts.com/registration You will benefit from:
- efficient and enhanced support
- future product updates scan with a smart phone
LASKO PRODUCTS, INC. LIMITED WARRANTY
(VALID IN THE USA, ITS TERRITORIES, AND CANADA ONLY)
WHAT THIS WARRANTY COVERS:
This product is warranted against defects in workmanship and/or materials.
HOW LONG THIS WARRANTY LASTS: This warranty extends only to the original
purchaser of the product and lasts for one (1) year from the date of original
purchase or until the original purchaser of the product sells or transfers the
product, whichever first occurs.
WHAT LASKO WILL DO: Lasko will, at its sole option, repair or replace any
part or parts that prove to be defective or replace the whole product with the
same or comparable model. For all warranty claims, the product must be
returned to Lasko Products, Inc. at customer expense with proof of purchase
within the warranty period. Contact the Lasko customer service department to
obtain a Return Authorization (“RA”). DO NOT return products without an RA or
the warranty claim will not be processed.
WHAT THIS WARRANTY DOES NOT COVER: This warranty does not apply if the
product was damaged or failed because of accident, improper handling or
operation, shipping damage, abuse, misuse, unauthorized repairs made or
attempted. This warranty does not cover shipping costs for the return of
products to Lasko for repair or replacement. Lasko will pay return shipping
charges from Lasko following warranty repairs or replacement.
ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY IMPLIED WARRANTY OF MERCHANTABILITY), LAST ONE YEAR FROM THE DATE OF
ORIGINAL PURCHASE OR UNTIL THE ORIGINAL PURCHASER OF THE PRODUCT SELLS OR
TRANSFERS THE PRODUCT, WHICHEVER FIRST OCCURS AND IN NO EVENT SHALL LASKO’S
LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY INCLUDE (I) INCIDENTAL OR
CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER, OR (II) REPLACMENT OR REPAIR
OF ANY HOUSE FUSES, CIRCUIT BREAKERS OR RECEPTACLES. NOTWITHSTANDING ANYTHING
TO THE CONTRARY, IN NO EVENT SHALL LASKO’S LIABILITY UNDER ANY EXPRESS OR
IMPLIED WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT AND ANY SUCH
LIABILITY SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD.
Some states and provinces do not allow limitations on how long an implied
warranty lasts, or the exclusion or limitation of incidental or consequential
damages, so these exclusions or limitations may not apply to you. This
warranty gives you specific legal rights. You may also have other rights which
vary from state to state and province to province. Proof of purchase is
required before a warranty claim will be accepted.
CUSTOMER SERVICE:
- Toll-Free 800-233-0268. Email: producthelp@laskoproducts.com
- Our Customer Service team is available to assist you with product and service questions, and replacement parts. They can be reached Monday through Friday, 8am-5pm Eastern. Please have your model number available, as well as the type and style (located on the underside of your product).
- Customer Service Dept., 820 Lincoln Ave., West Chester, PA 19380
- (Please do not send product to this location) www.laskoproducts.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>