MeetSummer X1 Wireless Smart Microphone User Manual

MeetSummer Wireless Smart Microphone Xl.
User Manual

What’s in the box

The picture Is calyces reference, please make theobJect as the standard.

Transmitter

1. Link & Noise Cancellation Button Short press to enable soft noise cancellation, with yellow indicator light. Short press again for strong noise cancellationwith red indicator light. Short press again to disable noise reduction, with green indicator light. Long press for 2s and click link device on the screen of receiver to relinking.

2. Power & Mute Button
   Short press to mute Of unmute. Long press for 2s to power on or off. Long press for lOs to reset.

3. Charging Port (U513{)

4. 3.5mm TRS Input
   For connecting external microphone.

5. Link & Noise Cancellation Indicator Light
   Solid green -Noise cancellation is off Solid yellow
   – Soft Noise cancellation is on Solid red
   – Strong Noise cancellation is on Blinks green slowly
   – Disconnected from the receiver

6. Power & Mute Indicator Light
   Solid green – Battery level: 1006-100%
   Solid red -Battery level: 5%-1096
   Blinks green quickly – Battery level: 0,546
   Solid yellow -Mute on

Receiver

1. Touchscreen
   Displays information such as the realLime volume, battery level of the receiver and transmitter. charging status, wireless signal, gain. Slide down or up on the screen to access settings.

2. Expansion Port
   For connecting to a mobile phone or a computer using a phone adapter.

3. Power Button Short press to lock or unlock screen. Long press for 2s to power on or off. Long press for lOs to reset.

4. Charging Port (USB-C)

5. Monitor Port Plug in the headphones to monitor the transmitter recording. 6.3.5mm TRS Output Connect to phone or camera using an adapter cable.
   • Due to the variety of phone and camera models,please select the appropriate input gain based on the specific model dunng using the product.

Charging Box

Remove the transmitters and the receiver out the charging case and they will link automatically Place the transmitters and receiver into the charging case to begin charging.

1. Battery Indicator Light In charging state. blinks red slowly during charging, solid green when bitty charged.
   In non-charging state:
   Solid green Battery level 30%-100%
   Solid yellow – Battery level 1O9-30%
   Solid red Battery level 516-104b
   blinks red quickly- Battery level 0%-5%

2. Charging Port (USB-C)

Operation

Using with a Mobile Phone
Attach the receiver to a mobile phone using the phone adapter to record audio and transmit to a mobile phone.

Operation

Wear the transmitter at the collar.
Using with a Camera

To record audio and transmit to a camera, attach the recelver to a camera using the back clip and connect to the microphone port of the camera using the camera cable provided.

• Lower the volume of the camera to avoid sound distortion.

Touchsereen Oprations

Settings Menu
Slide down or right to enter settings menu to operate and view track mode, mode selection, transmitter settings, receiver volume, phone speaker, system settings, etc.

Specifications

10S X 52 X figrnm
Weight| 21g| 35g| 159g
Battery Capacity| 200mAh| 660mAh| 3000rnAh
Operating
Time| 3 hours| 8 hours| Fully c.ha rge three devices
simultaneously x 1.8
Charging
Time| 1 hour 10 minutes| 1 hour 10 minutes| 2 hours

*The above data is obtained from MectSummer laboratory tests, there may be certain errors duc to differences in the use environment.

Safety Precautions

1. Product contains magnets. Keep the product away from magcards, IC cards, hard disks, RANI chips, implantable medical devices such as pacemakers, and otherdevices to avoid interference.
2. DO NOT listen at a high volume for an extended period using monitor earphones. Other-wise, you may experience possible hearing damage.
3. DO NOT allow the product to come into contact with any kind of liquid. DO NOT leave the product out In the rain or near a source of moisture. DO NOT drop the product Into water. If the inside of the battery comes into contact with water, chemical decomposition may occur, potentially resulting in the battery catching on fire, and may even lead to an explosion.
4. Never disassemble or pierce the product in anyway or the battery may teak, catch fire, or explode.
5. The product should be used in temperatures from -10 to 45°C (14 to 113′ F). Use of the product in environments above 45″C (113•F) can lead to a fire or explosion. Use of the product below -10′ C air F) can lead to permanent damage.
6. DO NOT heat the product. DO NOT put the product in a microwave oven or in a pressurize container. DO NOT leave the product near heat sources such as a furnace or heater. DO-NOT leave the product inside of a vehicle on hot days.
7. DO NOT place the battery under extremely low-pressure environments, as it may cause the battery to explode or leak flammable liquid and gas.
8. DO NOT drop or strike the product. DO NOT place heavy objects on the product.
9. If the battery swells severely, do not continue to use it.
10. DO NOT dispose of the battery in household waste, please follow the relevant national regulations for safe disposal of used batteries.
11. Use only the original model of the charging box, charging cable, and battery. Using uncertified or non-matching models may cause electric shock, fire, explosion, or other danger.

Product Model :……………………….
Product SN Purchase Date :………………………….
Customer Name :…………………..
Customer Address :………………………
Customer Phone :………………..
zip Code Fault Phenomenon :…………………………………….

Warranty Description:

The warranty period for this product is one year. During the warranty period, if a fault occurs under normal use in accordance with the user manual, our company provides frcc repairs. During the warranty period, if any of the following situations occur, our company will charge a repair fee:

1. Unable to provide this warranty card and
2. Faultsand damages caused by impmper useand valid purchase certificate. self-diSassembly.
3. Faults or damages caused by transportation, mouing, and dropping after purchase. (5) Damages caused by improper use, causing the equipment to enter water or other solutions.
4. Faults and damages caused byotherunavoidable external factor,
5. Da mages caused by using a power source or voltage other than the designated one.

• The appearance of the product and accessories are not covered by the warranty

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including Interference that may cause
undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there Is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
~ Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Waming: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment  The devices has been evaluated to meet general RF exposure requirement. the device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>