Einhell TC-PW Air Hammer Screwdriver Instruction Manual

Einhell TC-PW Air Hammer Screwdriver

Product Information

• Product Name: TC-PW 340
• Product Type: Air hammer screwdriver
• Model Number: 41.389.50
• Manufacturer: Unknown
• Language: Multilingual

Product Features:

• Suitable for screwing and unscrewing screws/nuts with a radial cross or hexagonal shape (sizes: 12 mm, 13 mm, 17 mm, 19 mm, 21 mm, 22 mm)
• Quick and easy connection to an air supply
• Reversible direction of rotation
• Adjustable torque settings
• Durable and sturdy construction

Product Usage Instructions

Safety Precautions:
Before using the screwdriver, read the operating instructions to reduce the risk of injury. Wear the necessary protective clothing, especially safety glasses. Follow all safety regulations.

Package Contents:
Check the package contents for any packaging or transport safety devices (if applicable). Ensure that all the included items are present.

Technical Specifications:

• Sound pressure level LpA: 99 dB(A), uncertainty KpA: 3 dB
• Sound power level LWA: 110 dB(A), uncertainty KWA: 3 dB
• Vibration emission value ah: 4.8 m/s2, uncertainty K: 1.5 m/s2

Please note that the provided vibration emission value can be used to compare this tool with other power tools.

1. Before Operation:
   Connect the screwdriver to an air supply using a quick coupling air hose (hose not included).

2. Tool Attachment / Removal:
   To attach or remove a tool, follow the instructions provided in Figure 1 of the manual.

3. Operation:

   • To change the direction of rotation, use the direction switch/torque switch (refer to Figure 4).
   • To tighten screws/nuts, firmly hold the screwdriver and apply pressure on the trigger (refer to Point 5.2).
   • To loosen screws/nuts, switch the direction of rotation to counterclockwise and follow the same procedure as tightening.

4. Cleaning, Maintenance, and Spare Parts Ordering:

   • Clean the screwdriver after each use.
   • For maintenance and spare parts ordering, refer to the manual for detailed instructions.

5. Disposal and Recycling:
   Follow local regulations for the proper disposal and recycling of the product.

6. Storage:
   Store the screwdriver in a cool, dry place. Avoid exposure to extreme temperatures and humidity.

7. Warranty Exclusions:
   The warranty does not cover damage caused by improper use, unauthorized repairs, or normal wear and tear.

Warning

• Danger! – Read the operating instructions to reduce the risk of injury
• Caution! Wear ear-muffs. The impact of noise can cause damage to hearing.
• Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials. Never use the device to work on any materials containing asbestos!
• Caution! Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted by the device can cause loss of sight.
• Each time before use, oil the compressed air tool via the compressed air coupling.
• Direction of rotation
• Torque selector

Danger!
When using the equipment, a few safety pre-cautions must be observed to avoid injuries and damage. Please read the complete operating instructions and safety regulations with due care. Keep this manual in a safe place, so that the in-formation is available at all times. If you give the equipment to any other person, hand over these operating instructions and safety regulations as well. We cannot accept any liability for damage or accidents which arise due to a failure to follow these instructions and the safety instructions.

Safety regulations

The corresponding safety information can be found in the enclosed booklet.

Danger!

• Read all safety regulations and instructions. Any errors made in following the safety regula-tions and instructions may result in an electric shock, fire and/or serious injury.
• Keep all safety regulations and instructions in a safe place for future use.
• Protect yourself and your environment from risks and accidents by taking the appropriate precauti-onary measures.

Layout and items supplied

Layout (Fig. 1-4)

1. Trigger lever
2. Switch for setting forward/reverse rotation and the torque
3. Square driver mount for connector
4. Nipple
5. Oil bottle (without oil)
6. Plug-on attachments (sizes: 8 mm, 10 mm, 11 mm, 13 mm, 17 mm, 19 mm, 21 mm, 22 mm)

Items supplied
Please check that the article is complete as specified in the scope of delivery. If parts are missing, please contact our service center or the sales outlet where you made your purchase at the latest within 5 working days after purchasing the product and upon presentation of a valid bill of purchase. Also, refer to the warranty table in the service information at the end of the operating instructions.

• Open the packaging and take out the equipment with care.
• Remove the packaging material and any packaging and/or transportation braces (if available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for transport damage.
• If possible, please keep the packaging until the end of the guarantee period.

Danger!
The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small parts. There is a danger of swallowing or suffocating!

• Pneumatic impact driver
• Nipple
• Oil bottle (without oil)
• Plug-on attachments (8 items)
• Original operating instructions
• Safety information

Proper use

• The impact driver is a handy, pneumatically operated tool designed for DIY applications. It is suitable for fastening and releasing threaded connections.
• The equipment is to be used only for its prescri-bed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer will be liable for any damage or inju-ries of any kind caused as a result of this.
• Please note that our equipment has not been de-signed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.

Remember.
Too small a diameter of the hose and too long a hose line will result in loss of power.

Technical data

• Max. loosening torque …………………………340 Nm
• Max. torque ……………………………………….340 Nm
• Working range (max. thread size) …………….. M14
• Max. permissible working pressure ………. 6.3 bar
• Idling speed …………………………………..7500 min-1
• Square drive mount ……………..12.7 mm (1/2 inch)
• Air consumption …………………………….. 142 l/min.
• Recommended hose diameter ……………….. 9 mm
• Weight …………………………………………………1,9 kg

Sound and vibration
Sound and vibration values were measured in accordance with EN ISO 15744.

• LpA sound pressure level ……………………. 99 dB(A)
• KpA uncertainty ……………………………………….3 dB
• LWA sound power level ……………………. 110 dB(A)
• KWA uncertainty ………………………………………3 dB

Wear ear-muffs.

• The impact of noise can cause damage to hea-ring.
• Total vibration values (vector sum of three direc-tions) were determined in accordance with EN ISO 15744 and EN ISO 28927-2.
• Vibration emission value ah = 4.8 m/s2
• K uncertainty = 1.5 m/s2
• The specified vibration value was established in accordance with a standardized testing method. It may change according to how the electric equip-ment is used and may exceed the specified value in exceptional circumstances.
• The specified vibration value can be used to compare the equipment with other electric power tools.
• The specified vibration value can be used for initi-al assessment of a harmful effect.

Keep the noise emissions and vibrations to a minimum.

• Only use appliances which are in perfect wor-king order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever ne-cessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.

Caution!

Residual risks
Even if you use this electric power tool in accordance with instructions, certain resi-dual risks cannot be rules out. The following hazards may arise in connection with the equipment’s construction and layout:

1. Lung damage if no suitable protective dust mask is used.
2. Damage to hearing if no suitable ear protection is used.
3. Health damage caused by hand-arm vibrations if the equipment is used over a prolonged period or is not properly guided and maintained.

Before starting the equipment

Before you connect the equipment to the power supply make sure that the data on the rating plate are identical to those of the supply voltage. Disconnect the compressed air supply before performing any cleaning, adjusting and main- tenance work.

Air supply:

• Via a compressed air source with pressure setting function, e.g. a compressor. Before starting up, please also read the section on care and mainte-nance.
• Performance values of the compressor: The compressor used should have a tank volume of at least 50 liters.

Setting values for work with the suction spray gun:
Set a maximum working pressure of 6.3 bar at your compressed air supply.

Remember:

• Wear the necessary protective clothing, in particular safety goggles, when working with the screwdriver.
• Pay attention to the safety regulations.

Lubricating the tool
Each time before starting and during prolonged operation:

• Insert 3-5 drops of special compressed air oil into the compressed air connection (5) (not included in delivery)
• Let the equipment run briefly so that any sur-plus oil is blown out.

Inserting/removing a tool (Fig. 1)

• Fit the required drive socket insert by pushing onto the square drive mount (3).
• Remove the drive socket insert by pulling it off the square drive mount (3).

Operation

Connecting to a compressed air supply

• Connect the nipple (5) to the quick-lock coup-ling of a compressed air hose (the hose is not supplied).
• Note the maximum permissible operating pressure of the equipment.

Rotational direction switch/ torque switch (Fig. 4)
You can select counter-clockwise or clockwise ro-tation and the torque using the rotational direction switch (2).

1. Low torque
2. Medium torque
3. High torque

Important!
To avoid gear damage, make sure that the tool has come to a complete stop before you change the direction of rotation.

Working with the impact driver Loosening:

• Set the direction of rotational direction switch (2) to counter-clockwise.
• Mount a drive socket insert on the impact driver (see point 5.2).
• Place the impact driver on the screw/nut and press the trigger lever (1).
• If the screws/nuts are very tight or if they are rusted, use a tire wrench or torque wrench to slightly loosen them.

Tightening:

• Warning! Use the impact driver only for loo-sening screws/nuts. If you want to use the impact driver to tighten screws and nuts, you must also use a torque limiter which is desig-ned for this purpose. If not, the screw connec-tion may be damaged. The torque limiter is available from your dealer. It is not included in the scope of this delivery.
• Prior to tightening, carefully insert the screw/nut into the threads.
• It is important that screws/nuts with special torque specifications (for example provided by the vehicle manufacturer in the automoti-ve sector) are tightened only with a suitable torque limiter.

Danger!
Screws/nuts must be finish-tightened with a torque wrench which is set to the torque speci-fied by the manufacturer and then they must be checked!

Cleaning, maintenance and ordering of spare parts

Disconnect the compressed air supply from the equipment before performing any cleaning work.

Cleaning

• Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean cloth or blow it down with compressed air at low pressure.
• We recommend cleaning the equipment im-mediately each time after use.
• Clean the equipment regularly with a damp cloth and some soft soap. Do not use cleaning agents or solvents; these may be ag-gressive to the plastic parts in the equipment. Ensure that no water can get into the interior of the equipment.

Maintenance

Warning!

• Disconnect the equipment from the compressed air supply before you carry out any maintenance or cleaning work.
• Compliance with the maintenance instructions lis-ted here will help this quality product provide you with a long service life and trouble-free operation.
• Regular lubrication is essential for your equip-ment to work properly for a prolonged period of time.
• Regularly check the speed and the vibration level by simply observing the tool.

Note:
Use environmentally friendly compressed air oil if you want to operate the equipment out-side the workshop.

The following lubrication options are available:

Lubrication by mist oiler
Connect a mist oiler between the compressed air source and the equipment (not supplied, available at retail stores)

By hand
Each time before using the compressed air tool insert 3-5 drops of special compressed air oil into the compressed air connection. If the com-pressed air tool has not been used for several days you must insert 5-10 drops of special compressed air oil into the compressed air connection before switching on. Store your compressed air tool only in a dry room.

Other maintenance
There are no other parts inside the equipment which require maintenance.

Excluded from the guarantee are:

• Wear parts
• Damage cause by too much operating pres-sure.
• Damage caused by non-conditioned com-pressed air.
• Damage caused by improper use or unautho-rized intervention.

Ordering replacement parts:
Please quote the following data when ordering replacement parts:

• Type of machine
• Article number of the machine
• Identification number of the machine
• Replacement part number of the part required For our latest prices and information please go to www.Einhell-Service.com.

Disposal and recycling

The equipment is supplied in packaging to pre-vent it from being damaged in transit. The raw materials in this packaging can be reused or recycled. The equipment and its accessories are made of various types of material, such as metal and plastic. Never place defective equipment in your household refuse. The equipment should be taken to a suitable collection center for proper disposal. If you do not know the whereabouts of such a collection point, you should ask in your local council offices.

Storage

• Store the equipment and accessories in a dark and dry place at above freezing temperature. The ideal storage temperature is between 5 and 30 °C. Store the electric tool in its original packaging.
• The reprinting or reproduction by any other me-ans, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of the Einhell Germany AG.

Subject to technical changes

Service information
We have competent service partners in all countries named on the guarantee certificate whose contact details can also be found on the guarantee certificate. These partners will help you with all service re-quests such as repairs, spare and wearing part orders or the purchase of consumables.

Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables.

Not necessarily included in the scope of delivery!

In the effect of defects or faults, please register the problem on the internet at www.Einhell-Service.com. Please ensure that you provide a precise description of the problem and answer the following questions in all cases:

• Did the equipment work at all or was it defective from the beginning?
• Did you notice anything (symptom or defect) prior to the failure?
• What malfunction does the equipment have in your opinion (main symptom)?Describe this malfunction.

Warranty certificate

Dear Customer,
All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the unlikely event that your device develops a fault, please contact our service department at the address shown on this guarantee card.

You can also contact us by telephone using the service number shown. Please note the following terms under which guarantee claims can be made:

1. These guarantee terms apply to consumers only, i.e. natural persons intending to use this product neither for their commercial activities nor for any other self-employed activities. These warranty terms regulate additional warranty services, which the manufacturer mentioned below promises to buyers of its new products in addition to their statutory rights of guarantee. Your statutory guarantee claims are not affected by this guarantee. Our guarantee is free of charge to you.
2. The warranty services cover only defects due to material or manufacturing faults on a product which you have bought from the manufacturer mentioned below and are limited to either the rectification of said defects on the product or the replacement of the product, whichever we prefer. Please note that our devices are not designed for use in commercial, trade or professional applica-tions. A guarantee contract will not be created if the device has been used by commercial, trade or industrial business or has been exposed to similar stresses during the guarantee period.
3. The following are not covered by our guarantee:
   • Damage to the device caused by a failure to follow the assembly instructions or due to incorrect installation, a failure to follow the operating instructions (for example connecting it to an incorrect mains voltage or current type) or a failure to follow the maintenance and safety instructions or by ex-posing the device to abnormal environmental conditions or by lack of care and maintenance.
   • Damage to the device caused by abuse or incorrect use (for example overloading the device or the use or unapproved tools or accessories), ingress of foreign bodies into the device (such as sand, stones or dust, transport damage), the use of force or damage caused by external forces (for ex-ample by dropping it).
   • Damage to the device or parts of the device caused by normal or natural wear or tear or by normal use of the device.
4. The guarantee is valid for a period of 24 months starting from the purchase date of the device. Gu-arantee claims should be submitted before the end of the guarantee period within two weeks of the defect being noticed. No guarantee claims will be accepted after the end of the guarantee period. The original guarantee period remains applicable to the device even if repairs are carried out or parts are replaced. In such cases, the work performed or parts fitted will not result in an extension of the guarantee period, and no new guarantee will become active for the work performed or parts fitted. This also applies if an on-site service is used.
5. To make a claim under the guarantee, please register the defective device at:
   www.Einhell-Service.com. Please keep your bill of purchase or other proof of purchase for the new device. Devices that are returned without proof of purchase or without a rating plate shall not be covered by the guarantee, because appropriate identification will not be possible. If the defect is co-vered by our guarantee, then the item in question will either be repaired immediately and returned to you or we will send you a new replacement.

Of course, we are also happy offer a chargeable repair service for any defects which are not covered by the scope of this guarantee or for units which are no longer covered. To take advantage of this service, please send the device to our service address. Also refer to the restrictions of this warranty concerning wear parts, consumables and missing parts as set out in the service information in these operating instructions.

Declaration of conformity

We declare conformity in accordance with the EU directive and standards for article

*Druckluft-Schlagschrauber (Pn) TC-PW 340 (Einhell)**

• 2014/29/EU

• 2005/32/EC_2009/125/EC

  • (EU)2015/1188

• 2014/35/EU

• 2006/28/EC

• 2014/30/EU

• 2014/32/EU

• 2014/53/EU

• 2014/68/EU

• (EU)2016/426
  Notified Body:

• (EU)2016/425

• 2011/65/EU_(EU)2015/863

• 2006/42/EC

  • Annex IV
  • Notified Body:
  • Reg. No.:

• 2000/14/EC_2005/88/EC

  • Annex V
  • Annex VI
  • Noise: measured LWA = dB (A); guaranteed LWA = dB (A) P = kW; L/Ø = cm
  • Notified Body:

• 2012/46/EU_(EU)2016/1628

  • Emission No.:

Standard references: EN ISO 11148-6

Einhell Germany AG · Wiesenweg 22 · D-94405 Landau/Isar

Landau/Isar, den 10.05.2022

• First CE: 18
• Art.-No.: 41.389.50
• I.-No.: 21022
• Subject to change without notice
• Archive-File/Record: NAPR026615
• Documents registrar: Luca Peer
• Wiesenweg 22, D-94405 Landau/Isar

Air hammer screwdriver

We, Einhell UK Ltd
Champions Business Park, First Floor Unit 10, Arrowe Brook Rd, Upton, Wirral CH49 0AB, United Kingdom

declare the conformity to UK standards and legislation was assessed for:

Impact Wrench (Pneumatic) TC-PW 340 (Einhell)

UK Legislation

• Simple Pressure Vessels (Safety) Regulation
• Electrical Equipment (Safety) Regulation
• Radio Equipment Regulation
• Personal Protective Equipment Regulation
• The Ecodesign for Energy-Related Products and Energy Information Regulation
• The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulation
• Noise Emission in the Environment by Equipment for use Outdoors Regulation
• Electromagnetic Compatibility Regulation
• Measuring Instruments Regulation
• Pressure Equipment (Safety) Regulation
  • Annex V
  • Annex VI
  • Noise: measured LWA = dB (A); guaranteed LWA = dB (A) P = kW; L/Ø = cm
  • UK Approved Body:
• Supply of Machinery (Safety) Regulation
  • Annex IV
  • UK Approved Body:
  • UKTE Certificate No.:

Standards: BS 11148-6

Wirral, 2021.05.10

• Article Number: 41.389.50
• I.-No.: 21022
• Subject to change without notice
• Archive-File/Record: NAPR026615
• Documents registrar: Luca Peer Wiesenweg 22, 94405 Landau/Isar, Germany.

References

• Einhell Service
• Einhell Service

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>